Avaliação in loco das perdas de protensão de cordoalhas engraxadas em lajes planas

Detalhes bibliográficos
Ano de defesa: 2008
Autor(a) principal: Sandro Jose Diniz Lima Soares
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal de Minas Gerais
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: https://hdl.handle.net/1843/ISMS-7TCN2W
Resumo: This dissertation presents the results of in situ measurements of stress losses in unbonded tendons of post tensioned flat slabs. These flats slabs have approximately 350 m2 in area and are 17 centimeter thick. They are part of a 17 story high hotel building in Belo Horizonte. Load cells were employed to measure the forces in the tendons; they were placed in the vicinity of the active and the passive anchorages. The forces in the tendons were monitored from the time of their straining up to 170 days afterwards. The measurements reveal a frictional coefficient equal to 0.0528; this value is smaller than 0.07 prescribed by the manufacture but very close to the value suggested by the Brazilian Code NBR 6118 of 0.05. The stress loss due to the anchorage of the tendons was of 5.17% of the initial stress. This value corresponds to an average tendon return of 3,21 mm, lower than 7 mm prescribed by the manufacturer and commonly used in design. The results indicate also that the remaining force near the passive anchorage is larger in relation to the value measured in the vicinity of the active one. The total stress loss measured so far (170 days) corresponds to 14 % of the initial post-tensioning stress.
id UFMG_917711438d4c9d01e1d38bb70ba95a76
oai_identifier_str oai:repositorio.ufmg.br:1843/ISMS-7TCN2W
network_acronym_str UFMG
network_name_str Repositório Institucional da UFMG
repository_id_str
spelling Avaliação in loco das perdas de protensão de cordoalhas engraxadas em lajes planasLajes de concretoEngenharia civilConstrução civilConcreto protentidoLajes planasConcreto protendidoPerdas de protensãoCordoalhas engraxadasThis dissertation presents the results of in situ measurements of stress losses in unbonded tendons of post tensioned flat slabs. These flats slabs have approximately 350 m2 in area and are 17 centimeter thick. They are part of a 17 story high hotel building in Belo Horizonte. Load cells were employed to measure the forces in the tendons; they were placed in the vicinity of the active and the passive anchorages. The forces in the tendons were monitored from the time of their straining up to 170 days afterwards. The measurements reveal a frictional coefficient equal to 0.0528; this value is smaller than 0.07 prescribed by the manufacture but very close to the value suggested by the Brazilian Code NBR 6118 of 0.05. The stress loss due to the anchorage of the tendons was of 5.17% of the initial stress. This value corresponds to an average tendon return of 3,21 mm, lower than 7 mm prescribed by the manufacturer and commonly used in design. The results indicate also that the remaining force near the passive anchorage is larger in relation to the value measured in the vicinity of the active one. The total stress loss measured so far (170 days) corresponds to 14 % of the initial post-tensioning stress.Universidade Federal de Minas Gerais2019-08-14T01:46:34Z2025-09-09T00:40:45Z2019-08-14T01:46:34Z2008-03-07info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttps://hdl.handle.net/1843/ISMS-7TCN2WSandro Jose Diniz Lima Soaresinfo:eu-repo/semantics/openAccessporreponame:Repositório Institucional da UFMGinstname:Universidade Federal de Minas Gerais (UFMG)instacron:UFMG2025-09-09T00:40:45Zoai:repositorio.ufmg.br:1843/ISMS-7TCN2WRepositório InstitucionalPUBhttps://repositorio.ufmg.br/oairepositorio@ufmg.bropendoar:2025-09-09T00:40:45Repositório Institucional da UFMG - Universidade Federal de Minas Gerais (UFMG)false
dc.title.none.fl_str_mv Avaliação in loco das perdas de protensão de cordoalhas engraxadas em lajes planas
title Avaliação in loco das perdas de protensão de cordoalhas engraxadas em lajes planas
spellingShingle Avaliação in loco das perdas de protensão de cordoalhas engraxadas em lajes planas
Sandro Jose Diniz Lima Soares
Lajes de concreto
Engenharia civil
Construção civil
Concreto protentido
Lajes planas
Concreto protendido
Perdas de protensão
Cordoalhas engraxadas
title_short Avaliação in loco das perdas de protensão de cordoalhas engraxadas em lajes planas
title_full Avaliação in loco das perdas de protensão de cordoalhas engraxadas em lajes planas
title_fullStr Avaliação in loco das perdas de protensão de cordoalhas engraxadas em lajes planas
title_full_unstemmed Avaliação in loco das perdas de protensão de cordoalhas engraxadas em lajes planas
title_sort Avaliação in loco das perdas de protensão de cordoalhas engraxadas em lajes planas
author Sandro Jose Diniz Lima Soares
author_facet Sandro Jose Diniz Lima Soares
author_role author
dc.contributor.author.fl_str_mv Sandro Jose Diniz Lima Soares
dc.subject.por.fl_str_mv Lajes de concreto
Engenharia civil
Construção civil
Concreto protentido
Lajes planas
Concreto protendido
Perdas de protensão
Cordoalhas engraxadas
topic Lajes de concreto
Engenharia civil
Construção civil
Concreto protentido
Lajes planas
Concreto protendido
Perdas de protensão
Cordoalhas engraxadas
description This dissertation presents the results of in situ measurements of stress losses in unbonded tendons of post tensioned flat slabs. These flats slabs have approximately 350 m2 in area and are 17 centimeter thick. They are part of a 17 story high hotel building in Belo Horizonte. Load cells were employed to measure the forces in the tendons; they were placed in the vicinity of the active and the passive anchorages. The forces in the tendons were monitored from the time of their straining up to 170 days afterwards. The measurements reveal a frictional coefficient equal to 0.0528; this value is smaller than 0.07 prescribed by the manufacture but very close to the value suggested by the Brazilian Code NBR 6118 of 0.05. The stress loss due to the anchorage of the tendons was of 5.17% of the initial stress. This value corresponds to an average tendon return of 3,21 mm, lower than 7 mm prescribed by the manufacturer and commonly used in design. The results indicate also that the remaining force near the passive anchorage is larger in relation to the value measured in the vicinity of the active one. The total stress loss measured so far (170 days) corresponds to 14 % of the initial post-tensioning stress.
publishDate 2008
dc.date.none.fl_str_mv 2008-03-07
2019-08-14T01:46:34Z
2019-08-14T01:46:34Z
2025-09-09T00:40:45Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://hdl.handle.net/1843/ISMS-7TCN2W
url https://hdl.handle.net/1843/ISMS-7TCN2W
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Minas Gerais
publisher.none.fl_str_mv Universidade Federal de Minas Gerais
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFMG
instname:Universidade Federal de Minas Gerais (UFMG)
instacron:UFMG
instname_str Universidade Federal de Minas Gerais (UFMG)
instacron_str UFMG
institution UFMG
reponame_str Repositório Institucional da UFMG
collection Repositório Institucional da UFMG
repository.name.fl_str_mv Repositório Institucional da UFMG - Universidade Federal de Minas Gerais (UFMG)
repository.mail.fl_str_mv repositorio@ufmg.br
_version_ 1856414061921566720