Estudo experimental e numérico sobre o roleteamento do aço ABNT 4140 endurecido

Detalhes bibliográficos
Ano de defesa: 2023
Autor(a) principal: Augusto Moura Martins
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Tese
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal de Minas Gerais
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: https://hdl.handle.net/1843/62742
Resumo: Deep rolling is a mechanical surface treatment capable of reducing roughness, increasing hardness and inducing compressive residual stresses on the workpiece surface, thus increasing the mechanical fatigue life of the component. This behavior is only achieved with use of a suitable combination of parameters, that is usually obtained by experimental analysis, procedure that can be expensive and time consuming, given that they depend on performing new tests for each value of the input parameters. In this case the use of finite element analysis is interesting because the cost to select suitable parameters can be reduced. The present study investigates the influence of the roughness promoted by turning and of the parameters employed in the subsequent deep rolling operation on roughness, surface topography, surface microstructure and microhardness, fatigue life, and fatigue fracture of hardened AISI 4140 steel (41 HRC). The samples were initially turned obtaining different surface roughness values. Afterwards, the samples were deep rolled using distinct feed and pressure values. Numerical simulation by finite elements considered a condition close to the actual deep rolling of small diameter cylindrical workpieces, using a deep rolling tool with multiple rolling elements, situation that has not been previously found in the literature. Deep rolling was able to reduce the roughness for all tested conditions, being observed an interaction between deep rolling feed and pressure, as the behavior changed depending on the selected values. Areal power spectral density analysis (APSD) was capable of indicating the incapacity of the lower pressure value to mitigate the effects of the turning parameter on the surface, in addition to the capacity of the higher deep rolling parameter values to generate a new surface pattern, that was also identified by morphology. Deep rolling was capable of increasing microhardness and of promoting a surface deformation. Fatigue life increased after deep rolling, and the samples with highest surface roughness after turning were able to achieve longer mechanical fatigue lives after deep rolling. Fatigue fracture was also affected, reducing the number of nucleation regions on the deep rolled samples. Numerical simulation evaluated the influence of deep rolling parameters, indicating larger plastic strains and compressive residual stresses for higher deep rolling pressures and more uniform residual stresses for lower deep rolling feeds.
id UFMG_e14a719f20c433d54abe4ad18c3c1c49
oai_identifier_str oai:repositorio.ufmg.br:1843/62742
network_acronym_str UFMG
network_name_str Repositório Institucional da UFMG
repository_id_str
spelling Estudo experimental e numérico sobre o roleteamento do aço ABNT 4140 endurecidoEngenharia mecânicaSiderurgiaAço - IndústriaCilindrosResistência de materiaisAço - Propriedades mecânicasAço - DuctilidadeAço - FadigaTorneamentoRoleteamentoQualidade superficialRugosidadeVida em fadigaAço ABNT 4140Elementos finitosDeep rolling is a mechanical surface treatment capable of reducing roughness, increasing hardness and inducing compressive residual stresses on the workpiece surface, thus increasing the mechanical fatigue life of the component. This behavior is only achieved with use of a suitable combination of parameters, that is usually obtained by experimental analysis, procedure that can be expensive and time consuming, given that they depend on performing new tests for each value of the input parameters. In this case the use of finite element analysis is interesting because the cost to select suitable parameters can be reduced. The present study investigates the influence of the roughness promoted by turning and of the parameters employed in the subsequent deep rolling operation on roughness, surface topography, surface microstructure and microhardness, fatigue life, and fatigue fracture of hardened AISI 4140 steel (41 HRC). The samples were initially turned obtaining different surface roughness values. Afterwards, the samples were deep rolled using distinct feed and pressure values. Numerical simulation by finite elements considered a condition close to the actual deep rolling of small diameter cylindrical workpieces, using a deep rolling tool with multiple rolling elements, situation that has not been previously found in the literature. Deep rolling was able to reduce the roughness for all tested conditions, being observed an interaction between deep rolling feed and pressure, as the behavior changed depending on the selected values. Areal power spectral density analysis (APSD) was capable of indicating the incapacity of the lower pressure value to mitigate the effects of the turning parameter on the surface, in addition to the capacity of the higher deep rolling parameter values to generate a new surface pattern, that was also identified by morphology. Deep rolling was capable of increasing microhardness and of promoting a surface deformation. Fatigue life increased after deep rolling, and the samples with highest surface roughness after turning were able to achieve longer mechanical fatigue lives after deep rolling. Fatigue fracture was also affected, reducing the number of nucleation regions on the deep rolled samples. Numerical simulation evaluated the influence of deep rolling parameters, indicating larger plastic strains and compressive residual stresses for higher deep rolling pressures and more uniform residual stresses for lower deep rolling feeds.CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível SuperiorUniversidade Federal de Minas Gerais2024-01-12T19:02:56Z2025-09-09T00:39:03Z2024-01-12T19:02:56Z2023-11-30info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisapplication/pdfhttps://hdl.handle.net/1843/62742porAugusto Moura Martinsinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFMGinstname:Universidade Federal de Minas Gerais (UFMG)instacron:UFMG2025-09-09T18:22:19Zoai:repositorio.ufmg.br:1843/62742Repositório InstitucionalPUBhttps://repositorio.ufmg.br/oairepositorio@ufmg.bropendoar:2025-09-09T18:22:19Repositório Institucional da UFMG - Universidade Federal de Minas Gerais (UFMG)false
dc.title.none.fl_str_mv Estudo experimental e numérico sobre o roleteamento do aço ABNT 4140 endurecido
title Estudo experimental e numérico sobre o roleteamento do aço ABNT 4140 endurecido
spellingShingle Estudo experimental e numérico sobre o roleteamento do aço ABNT 4140 endurecido
Augusto Moura Martins
Engenharia mecânica
Siderurgia
Aço - Indústria
Cilindros
Resistência de materiais
Aço - Propriedades mecânicas
Aço - Ductilidade
Aço - Fadiga
Torneamento
Roleteamento
Qualidade superficial
Rugosidade
Vida em fadiga
Aço ABNT 4140
Elementos finitos
title_short Estudo experimental e numérico sobre o roleteamento do aço ABNT 4140 endurecido
title_full Estudo experimental e numérico sobre o roleteamento do aço ABNT 4140 endurecido
title_fullStr Estudo experimental e numérico sobre o roleteamento do aço ABNT 4140 endurecido
title_full_unstemmed Estudo experimental e numérico sobre o roleteamento do aço ABNT 4140 endurecido
title_sort Estudo experimental e numérico sobre o roleteamento do aço ABNT 4140 endurecido
author Augusto Moura Martins
author_facet Augusto Moura Martins
author_role author
dc.contributor.author.fl_str_mv Augusto Moura Martins
dc.subject.por.fl_str_mv Engenharia mecânica
Siderurgia
Aço - Indústria
Cilindros
Resistência de materiais
Aço - Propriedades mecânicas
Aço - Ductilidade
Aço - Fadiga
Torneamento
Roleteamento
Qualidade superficial
Rugosidade
Vida em fadiga
Aço ABNT 4140
Elementos finitos
topic Engenharia mecânica
Siderurgia
Aço - Indústria
Cilindros
Resistência de materiais
Aço - Propriedades mecânicas
Aço - Ductilidade
Aço - Fadiga
Torneamento
Roleteamento
Qualidade superficial
Rugosidade
Vida em fadiga
Aço ABNT 4140
Elementos finitos
description Deep rolling is a mechanical surface treatment capable of reducing roughness, increasing hardness and inducing compressive residual stresses on the workpiece surface, thus increasing the mechanical fatigue life of the component. This behavior is only achieved with use of a suitable combination of parameters, that is usually obtained by experimental analysis, procedure that can be expensive and time consuming, given that they depend on performing new tests for each value of the input parameters. In this case the use of finite element analysis is interesting because the cost to select suitable parameters can be reduced. The present study investigates the influence of the roughness promoted by turning and of the parameters employed in the subsequent deep rolling operation on roughness, surface topography, surface microstructure and microhardness, fatigue life, and fatigue fracture of hardened AISI 4140 steel (41 HRC). The samples were initially turned obtaining different surface roughness values. Afterwards, the samples were deep rolled using distinct feed and pressure values. Numerical simulation by finite elements considered a condition close to the actual deep rolling of small diameter cylindrical workpieces, using a deep rolling tool with multiple rolling elements, situation that has not been previously found in the literature. Deep rolling was able to reduce the roughness for all tested conditions, being observed an interaction between deep rolling feed and pressure, as the behavior changed depending on the selected values. Areal power spectral density analysis (APSD) was capable of indicating the incapacity of the lower pressure value to mitigate the effects of the turning parameter on the surface, in addition to the capacity of the higher deep rolling parameter values to generate a new surface pattern, that was also identified by morphology. Deep rolling was capable of increasing microhardness and of promoting a surface deformation. Fatigue life increased after deep rolling, and the samples with highest surface roughness after turning were able to achieve longer mechanical fatigue lives after deep rolling. Fatigue fracture was also affected, reducing the number of nucleation regions on the deep rolled samples. Numerical simulation evaluated the influence of deep rolling parameters, indicating larger plastic strains and compressive residual stresses for higher deep rolling pressures and more uniform residual stresses for lower deep rolling feeds.
publishDate 2023
dc.date.none.fl_str_mv 2023-11-30
2024-01-12T19:02:56Z
2024-01-12T19:02:56Z
2025-09-09T00:39:03Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/doctoralThesis
format doctoralThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://hdl.handle.net/1843/62742
url https://hdl.handle.net/1843/62742
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Minas Gerais
publisher.none.fl_str_mv Universidade Federal de Minas Gerais
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFMG
instname:Universidade Federal de Minas Gerais (UFMG)
instacron:UFMG
instname_str Universidade Federal de Minas Gerais (UFMG)
instacron_str UFMG
institution UFMG
reponame_str Repositório Institucional da UFMG
collection Repositório Institucional da UFMG
repository.name.fl_str_mv Repositório Institucional da UFMG - Universidade Federal de Minas Gerais (UFMG)
repository.mail.fl_str_mv repositorio@ufmg.br
_version_ 1879513018853752832