Tendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporário
Ano de defesa: | 2011 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal de São Carlos
|
Programa de Pós-Graduação: |
Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM
|
Departamento: |
Não Informado pela instituição
|
País: |
BR
|
Palavras-chave em Português: | |
Área do conhecimento CNPq: | |
Link de acesso: | https://repositorio.ufscar.br/handle/ufscar/856 |
Resumo: | Mg alloys have attracted attention as potential implant material because of their good mechanical properties, biocompatibility and biodegradation properties. However corrosion of these alloys causes intense release of hydrogen gas which is not desirable for biomedical applications. Zberg et. al. reported a significant reduction in hydrogen evolution in Mg-Zn-Ca glassy alloys due the increase of Zn without the formation of undesirable intermetallic phases. These glassy alloys showed great potential for deployment in a new generation of biodegradable implants. In this context the evaluation of the glass forming ability (GFA) of Mg-Zn-Ca alloys, in the Mg-rich composition corner is relevant. In the present work we studied Mg-rich compositions in the Mg-Zn-Ca system based on the topological instability criterion (min) combined with the average electronegativity difference (e) among the elements in the alloy. Bulk samples were produced by rapid cooling in a copper mold and ribbons were produced by melt-spinning technique. The microstructure, amorphous nature, thermal properties and chemical composition of samples were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and electron dispersive spectroscopy (EDS). Best results were observed in alloys with Ca content limited to 6 at%. Furthermore, the samples ewre subjected to oxidation and high change in composition. |
id |
SCAR_bcdd108b215509c42f9190cde1613912 |
---|---|
oai_identifier_str |
oai:repositorio.ufscar.br:ufscar/856 |
network_acronym_str |
SCAR |
network_name_str |
Repositório Institucional da UFSCAR |
repository_id_str |
|
spelling |
Danez, Gabriela PancevBotta Filho, Walter Joséhttp://genos.cnpq.br:12010/dwlattes/owa/prc_imp_cv_int?f_cod=K4783053Z4http://lattes.cnpq.br/81372346807273252016-06-02T19:12:16Z2012-02-152016-06-02T19:12:16Z2011-10-24DANEZ, Gabriela Pancev. Evaluation of the glass forming ability in mg-zn-ca alloys for biomedical application. 2011. 112 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2011.https://repositorio.ufscar.br/handle/ufscar/856Mg alloys have attracted attention as potential implant material because of their good mechanical properties, biocompatibility and biodegradation properties. However corrosion of these alloys causes intense release of hydrogen gas which is not desirable for biomedical applications. Zberg et. al. reported a significant reduction in hydrogen evolution in Mg-Zn-Ca glassy alloys due the increase of Zn without the formation of undesirable intermetallic phases. These glassy alloys showed great potential for deployment in a new generation of biodegradable implants. In this context the evaluation of the glass forming ability (GFA) of Mg-Zn-Ca alloys, in the Mg-rich composition corner is relevant. In the present work we studied Mg-rich compositions in the Mg-Zn-Ca system based on the topological instability criterion (min) combined with the average electronegativity difference (e) among the elements in the alloy. Bulk samples were produced by rapid cooling in a copper mold and ribbons were produced by melt-spinning technique. The microstructure, amorphous nature, thermal properties and chemical composition of samples were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and electron dispersive spectroscopy (EDS). Best results were observed in alloys with Ca content limited to 6 at%. Furthermore, the samples ewre subjected to oxidation and high change in composition.As ligas a base de magnésio têm recebido atenção especial para aplicação em materiais biomédicos, isso se deve as suas propriedades, como: resistência mecânica adequada, biocompatibilidade e biocorrosão. No entanto, a corrosão dessas ligas é acompanhada de uma intensa liberação de hidrogênio que é indesejável para a classe de matérias biomédicos. Zberg et al. mostraram uma significante diminuição da liberação de hidrogênio em ligas vítreas de Mg-Zn- Ca devido ao aumento no teor de zinco sem a formação de fases intermetálicas indesejáveis. Essas ligas mostraram um grande potencial de serem aplicadas em implantes biocorrosivos. Nesse contexto, o estudo da tendência de formação de fase amorfa (TFA) em ligas do sistema Mg-Zn-Ca ricas em magnésio torna-se interessante. Esse mestrado focou-se no estudo da TFA, utilizando uma combinação de dois critérios: da mínima instabilidade topológica (min) e da diferença de eletronegatividade média (e). Amostras em formato de cunha foram fabricadas por resfriamento rápido em molde de cobre e fitas foram elaboradas pela técnica de melt-spinning. A microestrutura, natureza amorfa, propriedades térmicas e composição química foram analisadas por microscopia eletrônica de varredura (MEV), difração de raios X (DRX), calorimetria diferencial de varredura (DSC) e espectroscopia por dispersão de energia (EDS). Os melhores resultados, quanto a amorfização, foram das ligas com teor de cálcio de até 6%at., além disso, as amostras elaboradas experimentaram elevada oxidação e mudança de composição.Universidade Federal de Sao Carlosapplication/pdfporUniversidade Federal de São CarlosPrograma de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEMUFSCarBREngenharia de materiaisMateriais amorfosSolidificação rápidaLigas de magnésioBiomateriaisENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICATendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporárioEvaluation of the glass forming ability in mg-zn-ca alloys for biomedical applicationinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFSCARinstname:Universidade Federal de São Carlos (UFSCAR)instacron:UFSCARORIGINAL4090.pdfapplication/pdf6167485https://{{ getenv "DSPACE_HOST" "repositorio.ufscar.br" }}/bitstream/ufscar/856/1/4090.pdf33ee7a58557dddae36bb9e55e7be689eMD51TEXT4090.pdf.txt4090.pdf.txtExtracted texttext/plain0https://{{ getenv "DSPACE_HOST" "repositorio.ufscar.br" }}/bitstream/ufscar/856/2/4090.pdf.txtd41d8cd98f00b204e9800998ecf8427eMD52THUMBNAIL4090.pdf.jpg4090.pdf.jpgIM Thumbnailimage/jpeg6169https://{{ getenv "DSPACE_HOST" "repositorio.ufscar.br" }}/bitstream/ufscar/856/3/4090.pdf.jpg10dc3ee3ee17f160fc2a8d46dc0a133aMD53ufscar/8562019-09-11 04:03:59.946oai:repositorio.ufscar.br:ufscar/856Repositório InstitucionalPUBhttps://repositorio.ufscar.br/oai/requestopendoar:43222023-05-25T12:43:48.699036Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR)false |
dc.title.por.fl_str_mv |
Tendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporário |
dc.title.alternative.eng.fl_str_mv |
Evaluation of the glass forming ability in mg-zn-ca alloys for biomedical application |
title |
Tendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporário |
spellingShingle |
Tendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporário Danez, Gabriela Pancev Engenharia de materiais Materiais amorfos Solidificação rápida Ligas de magnésio Biomateriais ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
title_short |
Tendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporário |
title_full |
Tendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporário |
title_fullStr |
Tendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporário |
title_full_unstemmed |
Tendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporário |
title_sort |
Tendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporário |
author |
Danez, Gabriela Pancev |
author_facet |
Danez, Gabriela Pancev |
author_role |
author |
dc.contributor.authorlattes.por.fl_str_mv |
http://lattes.cnpq.br/8137234680727325 |
dc.contributor.author.fl_str_mv |
Danez, Gabriela Pancev |
dc.contributor.advisor1.fl_str_mv |
Botta Filho, Walter José |
dc.contributor.advisor1Lattes.fl_str_mv |
http://genos.cnpq.br:12010/dwlattes/owa/prc_imp_cv_int?f_cod=K4783053Z4 |
contributor_str_mv |
Botta Filho, Walter José |
dc.subject.por.fl_str_mv |
Engenharia de materiais Materiais amorfos Solidificação rápida Ligas de magnésio Biomateriais |
topic |
Engenharia de materiais Materiais amorfos Solidificação rápida Ligas de magnésio Biomateriais ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
dc.subject.cnpq.fl_str_mv |
ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
description |
Mg alloys have attracted attention as potential implant material because of their good mechanical properties, biocompatibility and biodegradation properties. However corrosion of these alloys causes intense release of hydrogen gas which is not desirable for biomedical applications. Zberg et. al. reported a significant reduction in hydrogen evolution in Mg-Zn-Ca glassy alloys due the increase of Zn without the formation of undesirable intermetallic phases. These glassy alloys showed great potential for deployment in a new generation of biodegradable implants. In this context the evaluation of the glass forming ability (GFA) of Mg-Zn-Ca alloys, in the Mg-rich composition corner is relevant. In the present work we studied Mg-rich compositions in the Mg-Zn-Ca system based on the topological instability criterion (min) combined with the average electronegativity difference (e) among the elements in the alloy. Bulk samples were produced by rapid cooling in a copper mold and ribbons were produced by melt-spinning technique. The microstructure, amorphous nature, thermal properties and chemical composition of samples were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and electron dispersive spectroscopy (EDS). Best results were observed in alloys with Ca content limited to 6 at%. Furthermore, the samples ewre subjected to oxidation and high change in composition. |
publishDate |
2011 |
dc.date.issued.fl_str_mv |
2011-10-24 |
dc.date.available.fl_str_mv |
2012-02-15 2016-06-02T19:12:16Z |
dc.date.accessioned.fl_str_mv |
2016-06-02T19:12:16Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
DANEZ, Gabriela Pancev. Evaluation of the glass forming ability in mg-zn-ca alloys for biomedical application. 2011. 112 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2011. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufscar.br/handle/ufscar/856 |
identifier_str_mv |
DANEZ, Gabriela Pancev. Evaluation of the glass forming ability in mg-zn-ca alloys for biomedical application. 2011. 112 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2011. |
url |
https://repositorio.ufscar.br/handle/ufscar/856 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de São Carlos |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM |
dc.publisher.initials.fl_str_mv |
UFSCar |
dc.publisher.country.fl_str_mv |
BR |
publisher.none.fl_str_mv |
Universidade Federal de São Carlos |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFSCAR instname:Universidade Federal de São Carlos (UFSCAR) instacron:UFSCAR |
instname_str |
Universidade Federal de São Carlos (UFSCAR) |
instacron_str |
UFSCAR |
institution |
UFSCAR |
reponame_str |
Repositório Institucional da UFSCAR |
collection |
Repositório Institucional da UFSCAR |
bitstream.url.fl_str_mv |
https://{{ getenv "DSPACE_HOST" "repositorio.ufscar.br" }}/bitstream/ufscar/856/1/4090.pdf https://{{ getenv "DSPACE_HOST" "repositorio.ufscar.br" }}/bitstream/ufscar/856/2/4090.pdf.txt https://{{ getenv "DSPACE_HOST" "repositorio.ufscar.br" }}/bitstream/ufscar/856/3/4090.pdf.jpg |
bitstream.checksum.fl_str_mv |
33ee7a58557dddae36bb9e55e7be689e d41d8cd98f00b204e9800998ecf8427e 10dc3ee3ee17f160fc2a8d46dc0a133a |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR) |
repository.mail.fl_str_mv |
|
_version_ |
1767351057080385536 |