Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.

Detalhes bibliográficos
Ano de defesa: 2007
Autor(a) principal: Prieto, Paulo Juliano dos Santos
Orientador(a): Bueno, José Maria Corrêa lattes
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal de São Carlos
Programa de Pós-Graduação: Programa de Pós-Graduação em Engenharia Química - PPGEQ
Departamento: Não Informado pela instituição
País: BR
Palavras-chave em Português:
Área do conhecimento CNPq:
Link de acesso: https://repositorio.ufscar.br/handle/ufscar/3990
Resumo: A new method to prepare Pt nanoparticles (NPs) dispersed on Al2O3 and CeO2-Al2O3 is described in this work. The Pt-NPs were used to prepare CeO2-Al2O3-supported Pt nanocatalysts (Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3). The catalysts were characterized by BET surface area (SBET), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) reaction of dehydrogenation of cyclohexane to measure Pt dispersion and transmission electronic microscopy (MET). The Pt-NPs were obtained from solution of [PtCl6]2-, poly(Nvinyl- 2-pyrolidone) (PVP) and methanol. The Al2O3 and CeO2-Al2O3 supports were obtained by sol-gel methods. The Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 catalysts were obtained by addition of Pt-NPs sol during sol-gel synthesis Al2O3 and CeO2-Al2O3. TEM analysis show that the synthesis of the Pt-NPs resulted in particles with average size of 3.2 nm and the results of TEM of the catalysts indicate that Pt particles, finely dispersed on the support occupying probably the interior of the pores of the support. The comparison between FTIR-CO results of Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 catalysts indicated that the particles in the different catalysts show the same electronic density superficial and that there is a geometric modification on the surface of the particles of the Pt- NPs/CeO2-Al2O3 catalyst provoked by presence of CeOx on the surface of particles. The nanocatalysts Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 exhibited a high catalytic activity and stability for the steam reforming of methane and for the partial oxidation of methane. The CH4 turnover rate of Pt-NPs/CeO2-Al2O3 catalysts for the steam reforming of methane is around two orders of magnitude higher compared to that of Pt-NPs/Al2O3 catalyst. The high activity for Ce-contaning catalysts is assigned to higher accessibility of the Pt sites to CH4. The high stability of Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 nanocatalysts in partial oxidation of methane is assigned to the high contact metal-support, which can be caused by preparation method that improves the accessibility of methane to Pt sites.
id SCAR_d5a938d1b8b8ba6b426e27afbf744773
oai_identifier_str oai:repositorio.ufscar.br:ufscar/3990
network_acronym_str SCAR
network_name_str Repositório Institucional da UFSCAR
repository_id_str
spelling Prieto, Paulo Juliano dos SantosBueno, José Maria Corrêahttp://lattes.cnpq.br/0157452280626031http://lattes.cnpq.br/71865883878589432016-06-02T19:56:30Z2007-11-142016-06-02T19:56:30Z2007-03-16PRIETO, Paulo Juliano dos Santos. Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.. 2007. 82 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2007.https://repositorio.ufscar.br/handle/ufscar/3990A new method to prepare Pt nanoparticles (NPs) dispersed on Al2O3 and CeO2-Al2O3 is described in this work. The Pt-NPs were used to prepare CeO2-Al2O3-supported Pt nanocatalysts (Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3). The catalysts were characterized by BET surface area (SBET), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) reaction of dehydrogenation of cyclohexane to measure Pt dispersion and transmission electronic microscopy (MET). The Pt-NPs were obtained from solution of [PtCl6]2-, poly(Nvinyl- 2-pyrolidone) (PVP) and methanol. The Al2O3 and CeO2-Al2O3 supports were obtained by sol-gel methods. The Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 catalysts were obtained by addition of Pt-NPs sol during sol-gel synthesis Al2O3 and CeO2-Al2O3. TEM analysis show that the synthesis of the Pt-NPs resulted in particles with average size of 3.2 nm and the results of TEM of the catalysts indicate that Pt particles, finely dispersed on the support occupying probably the interior of the pores of the support. The comparison between FTIR-CO results of Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 catalysts indicated that the particles in the different catalysts show the same electronic density superficial and that there is a geometric modification on the surface of the particles of the Pt- NPs/CeO2-Al2O3 catalyst provoked by presence of CeOx on the surface of particles. The nanocatalysts Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 exhibited a high catalytic activity and stability for the steam reforming of methane and for the partial oxidation of methane. The CH4 turnover rate of Pt-NPs/CeO2-Al2O3 catalysts for the steam reforming of methane is around two orders of magnitude higher compared to that of Pt-NPs/Al2O3 catalyst. The high activity for Ce-contaning catalysts is assigned to higher accessibility of the Pt sites to CH4. The high stability of Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 nanocatalysts in partial oxidation of methane is assigned to the high contact metal-support, which can be caused by preparation method that improves the accessibility of methane to Pt sites.Um novo método de preparação para catalisadores com nanopartículas de Pt (NPs), dispersas em Al2O3 e CeO2-Al2O3 é descrito nesse trabalho. As nanopartículas de Pt foram previamente obtidas por redução do H2PtCl6 em solução de metanol em um sistema de refluxo por 180 minutos na presença do polímero polivinlpirrolidona (PVP), que atua como agente protetor e estabilizante controlando o tamanho das partículas durante a síntese. Os suportes Al2O3 e CeO2-Al2O3 foram pelo método sol gel. Os catalisadores Pt-NPs/Al2O3 e Pt- NPs/CeO2-Al2O3 foram preparados pela adição de alíquotas da dispersão coloidal contendo as nanopartículas aos géis Al2O3 e CeO2-Al2O3 durante a síntese sol gel. Os catalisadores Pt-NPs/Al2O3 e Pt-NPs/12CeO2-Al2O3 foram caracterizados por técnicas de medida de área superficial (BET), difração de raios X (DRX), transformada de Fourier do espectros de adsorção de CO na região do infravermelho (DRIFT de CO), microscopia eletrônica de transmissão (TEM) e reação de desidrogenação do cicloexano. As análises de TEM indicaram que a síntese das partículas de Pt levou à formação de partículas com tamanho médio de 3,2 nm e os resultados de TEM dos catalisadores indicam que as partículas de Pt estão bem distribuídas no suporte, ocupando provavelmente os poros do suporte. A comparação entre os resultados DRIFT de CO para os catalisadores Pt- NPs/Al2O3 e Pt-NPs/12CeO2-Al2O3 indicaram que as partículas presentes nos diferentes catalisadores apresentam mesma densidade eletrônica superficial e apontaram para uma modificação geométrica na superfície das partículas presentes no catalisador Pt-NPs/12CeO2- Al2O3, provocadas pela presença de CeOx na superfície das partículas. Os nanocatalisadores exibiram uma elevada atividade e estabilidade para reações de reforma a vapor e oxidação parcial do metano. O TOFCH4 para o catalisador Pt-NPs/12CeO2- Al2O3 apresentou magnitude duas vezes maior para a reforma a vapor no metano quando comparado ao catalisador Pt-NPs/Al2O3. A alta atividade do catalisador contendo Ce está associada a maior acessibilidade da molécula de metano aos sítios de Pt. A alta estabilidade dos catalisadores Pt-NPs/Al2O3 e Pt-NPs/CeO2-Al2O3 na oxidação parcial do metano está associada à alta interação metal-suporte que foi causada pelo método preparação que resulta em uma maior acessibilidade da molécula de metano aos sítios da Pt.Universidade Federal de Sao Carlosapplication/pdfporUniversidade Federal de São CarlosPrograma de Pós-Graduação em Engenharia Química - PPGEQUFSCarBRCatalisadoresReforma - metanoPlatinaNanopartículasSol-Gel métodoÓxido de cérioENGENHARIAS::ENGENHARIA QUIMICANanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFSCARinstname:Universidade Federal de São Carlos (UFSCAR)instacron:UFSCARORIGINALDissPJSP.pdfapplication/pdf1910866https://{{ getenv "DSPACE_HOST" "repositorio.ufscar.br" }}/bitstream/ufscar/3990/1/DissPJSP.pdf5b5024066777ac7e3c56ead77884d2c7MD51THUMBNAILDissPJSP.pdf.jpgDissPJSP.pdf.jpgIM Thumbnailimage/jpeg7234https://{{ getenv "DSPACE_HOST" "repositorio.ufscar.br" }}/bitstream/ufscar/3990/2/DissPJSP.pdf.jpgbe7dfb189fa1237a56c8db78dd7ad105MD52ufscar/39902019-09-11 02:29:51.114oai:repositorio.ufscar.br:ufscar/3990Repositório InstitucionalPUBhttps://repositorio.ufscar.br/oai/requestopendoar:43222023-05-25T12:48:03.028860Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR)false
dc.title.por.fl_str_mv Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.
title Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.
spellingShingle Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.
Prieto, Paulo Juliano dos Santos
Catalisadores
Reforma - metano
Platina
Nanopartículas
Sol-Gel método
Óxido de cério
ENGENHARIAS::ENGENHARIA QUIMICA
title_short Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.
title_full Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.
title_fullStr Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.
title_full_unstemmed Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.
title_sort Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.
author Prieto, Paulo Juliano dos Santos
author_facet Prieto, Paulo Juliano dos Santos
author_role author
dc.contributor.authorlattes.por.fl_str_mv http://lattes.cnpq.br/7186588387858943
dc.contributor.author.fl_str_mv Prieto, Paulo Juliano dos Santos
dc.contributor.advisor1.fl_str_mv Bueno, José Maria Corrêa
dc.contributor.advisor1Lattes.fl_str_mv http://lattes.cnpq.br/0157452280626031
contributor_str_mv Bueno, José Maria Corrêa
dc.subject.por.fl_str_mv Catalisadores
Reforma - metano
Platina
Nanopartículas
Sol-Gel método
Óxido de cério
topic Catalisadores
Reforma - metano
Platina
Nanopartículas
Sol-Gel método
Óxido de cério
ENGENHARIAS::ENGENHARIA QUIMICA
dc.subject.cnpq.fl_str_mv ENGENHARIAS::ENGENHARIA QUIMICA
description A new method to prepare Pt nanoparticles (NPs) dispersed on Al2O3 and CeO2-Al2O3 is described in this work. The Pt-NPs were used to prepare CeO2-Al2O3-supported Pt nanocatalysts (Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3). The catalysts were characterized by BET surface area (SBET), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) reaction of dehydrogenation of cyclohexane to measure Pt dispersion and transmission electronic microscopy (MET). The Pt-NPs were obtained from solution of [PtCl6]2-, poly(Nvinyl- 2-pyrolidone) (PVP) and methanol. The Al2O3 and CeO2-Al2O3 supports were obtained by sol-gel methods. The Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 catalysts were obtained by addition of Pt-NPs sol during sol-gel synthesis Al2O3 and CeO2-Al2O3. TEM analysis show that the synthesis of the Pt-NPs resulted in particles with average size of 3.2 nm and the results of TEM of the catalysts indicate that Pt particles, finely dispersed on the support occupying probably the interior of the pores of the support. The comparison between FTIR-CO results of Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 catalysts indicated that the particles in the different catalysts show the same electronic density superficial and that there is a geometric modification on the surface of the particles of the Pt- NPs/CeO2-Al2O3 catalyst provoked by presence of CeOx on the surface of particles. The nanocatalysts Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 exhibited a high catalytic activity and stability for the steam reforming of methane and for the partial oxidation of methane. The CH4 turnover rate of Pt-NPs/CeO2-Al2O3 catalysts for the steam reforming of methane is around two orders of magnitude higher compared to that of Pt-NPs/Al2O3 catalyst. The high activity for Ce-contaning catalysts is assigned to higher accessibility of the Pt sites to CH4. The high stability of Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 nanocatalysts in partial oxidation of methane is assigned to the high contact metal-support, which can be caused by preparation method that improves the accessibility of methane to Pt sites.
publishDate 2007
dc.date.available.fl_str_mv 2007-11-14
2016-06-02T19:56:30Z
dc.date.issued.fl_str_mv 2007-03-16
dc.date.accessioned.fl_str_mv 2016-06-02T19:56:30Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.citation.fl_str_mv PRIETO, Paulo Juliano dos Santos. Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.. 2007. 82 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2007.
dc.identifier.uri.fl_str_mv https://repositorio.ufscar.br/handle/ufscar/3990
identifier_str_mv PRIETO, Paulo Juliano dos Santos. Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.. 2007. 82 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2007.
url https://repositorio.ufscar.br/handle/ufscar/3990
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de São Carlos
dc.publisher.program.fl_str_mv Programa de Pós-Graduação em Engenharia Química - PPGEQ
dc.publisher.initials.fl_str_mv UFSCar
dc.publisher.country.fl_str_mv BR
publisher.none.fl_str_mv Universidade Federal de São Carlos
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFSCAR
instname:Universidade Federal de São Carlos (UFSCAR)
instacron:UFSCAR
instname_str Universidade Federal de São Carlos (UFSCAR)
instacron_str UFSCAR
institution UFSCAR
reponame_str Repositório Institucional da UFSCAR
collection Repositório Institucional da UFSCAR
bitstream.url.fl_str_mv https://{{ getenv "DSPACE_HOST" "repositorio.ufscar.br" }}/bitstream/ufscar/3990/1/DissPJSP.pdf
https://{{ getenv "DSPACE_HOST" "repositorio.ufscar.br" }}/bitstream/ufscar/3990/2/DissPJSP.pdf.jpg
bitstream.checksum.fl_str_mv 5b5024066777ac7e3c56ead77884d2c7
be7dfb189fa1237a56c8db78dd7ad105
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
repository.name.fl_str_mv Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR)
repository.mail.fl_str_mv
_version_ 1767351081040347136