Produção de hidrogênio por reforma a vapor e oxidativa do etanol utilizando óxidos do tipo perovskita

Detalhes bibliográficos
Ano de defesa: 2013
Autor(a) principal: Garcia, Silmara Rodrigues
Orientador(a): Assaf, José Mansur lattes
Banca de defesa: Não Informado pela instituição
Tipo de documento: Tese
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal de São Carlos
Programa de Pós-Graduação: Programa de Pós-Graduação em Engenharia Química - PPGEQ
Departamento: Não Informado pela instituição
País: BR
Palavras-chave em Português:
Palavras-chave em Inglês:
Área do conhecimento CNPq:
Link de acesso: https://repositorio.ufscar.br/handle/ufscar/3940
Resumo: This paper assesses the catalytic activities of LaCoO3 perovskite towards the steam reforming oxidative reaction of ethanol . Due to the low surface area which is commonly found on perovskite-type oxides , these were supported onAl2O3 , ZrO2 and ZrO2-Al2O3. The unsupported catalysts were prepared by precipitation and citrate methods whilst the supported catalysts were prepared by deposition -precipitation . The techniques employed to characterize the solids were: X -ray diffraction by the powder method (DRX) , X-Ray Fluorescence (FRX) Programmed Temperature Reduction with H2 (RTP-H2) Nitrogen Adsorption by B.E.T. method, X-ray Diffraction in situ, Raman spectroscopy, transmission electronic microscopy, scanning electronic microscopy, hydrogen desorption at programmed temperature TPD-H2 and Thermogravimetric Analysis. The preparation of the catalysts by precipitation and citrate routes proved to be efficient to obtain the perovskite type oxides .The supported catalysts showed surface area values larger than the unsupported ones, as there was the formation of other oxidase phases due to stand- perovskite or metal support interactions , as observed by the decreasing of reduction degree , through RTP analysis .The unsupported catalysts calcined at 700 , 800 and 900 ° C presented the best activity for oxidative reforming reaction than the supported ones. These, in turn, showed better catalytic activity towards the oxidative reforming reaction in relation to steam reforming of ethanol. By the X-ray Diffraction analysis in situ performed during the RTP-H2 and reaction tests, it was observed that the 20LaCoO3/Al2O3 catalyst prepared by method 2 - deposition -precipitation - showed lower size of crystallite of cobalt during the steam reforming reactions and oxidation in situ, therefore suggesting a better metal dispersion . The unsupported LaCoO3 catalyst prepared by precipitation method and calcined at 700ºC showed less coke formation towards the oxidative reaction of reforming of ethanol . Among the supported compounds the 20LaCoO3/ZrO2 showed the lowest coke formation in the same reaction. The analysis of scanning electron microscopy performed after the oxidative reaction, Raman spectroscopy the and Thermogravimetric Analysis, suggests that the unsupported LaCoO3 catalyst prepared by precipitation and calcined at 700ºC and the supported 20LaCoO3/ZrO2 catalyst showed lower carbon formation.
id SCAR_f51ac27f38a3844f6ee89401eb3e8a8b
oai_identifier_str oai:repositorio.ufscar.br:ufscar/3940
network_acronym_str SCAR
network_name_str Repositório Institucional da UFSCAR
repository_id_str
spelling Garcia, Silmara RodriguesAssaf, José Mansurhttp://lattes.cnpq.br/9563312407691130http://lattes.cnpq.br/85101904310718662016-06-02T19:55:37Z2014-02-072016-06-02T19:55:37Z2013-10-17GARCIA, Silmara Rodrigues. Produção de hidrogênio por reforma a vapor e oxidativa do etanol utilizando óxidos do tipo perovskita. 2013. 137 f. Tese (Doutorado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2013.https://repositorio.ufscar.br/handle/ufscar/3940This paper assesses the catalytic activities of LaCoO3 perovskite towards the steam reforming oxidative reaction of ethanol . Due to the low surface area which is commonly found on perovskite-type oxides , these were supported onAl2O3 , ZrO2 and ZrO2-Al2O3. The unsupported catalysts were prepared by precipitation and citrate methods whilst the supported catalysts were prepared by deposition -precipitation . The techniques employed to characterize the solids were: X -ray diffraction by the powder method (DRX) , X-Ray Fluorescence (FRX) Programmed Temperature Reduction with H2 (RTP-H2) Nitrogen Adsorption by B.E.T. method, X-ray Diffraction in situ, Raman spectroscopy, transmission electronic microscopy, scanning electronic microscopy, hydrogen desorption at programmed temperature TPD-H2 and Thermogravimetric Analysis. The preparation of the catalysts by precipitation and citrate routes proved to be efficient to obtain the perovskite type oxides .The supported catalysts showed surface area values larger than the unsupported ones, as there was the formation of other oxidase phases due to stand- perovskite or metal support interactions , as observed by the decreasing of reduction degree , through RTP analysis .The unsupported catalysts calcined at 700 , 800 and 900 ° C presented the best activity for oxidative reforming reaction than the supported ones. These, in turn, showed better catalytic activity towards the oxidative reforming reaction in relation to steam reforming of ethanol. By the X-ray Diffraction analysis in situ performed during the RTP-H2 and reaction tests, it was observed that the 20LaCoO3/Al2O3 catalyst prepared by method 2 - deposition -precipitation - showed lower size of crystallite of cobalt during the steam reforming reactions and oxidation in situ, therefore suggesting a better metal dispersion . The unsupported LaCoO3 catalyst prepared by precipitation method and calcined at 700ºC showed less coke formation towards the oxidative reaction of reforming of ethanol . Among the supported compounds the 20LaCoO3/ZrO2 showed the lowest coke formation in the same reaction. The analysis of scanning electron microscopy performed after the oxidative reaction, Raman spectroscopy the and Thermogravimetric Analysis, suggests that the unsupported LaCoO3 catalyst prepared by precipitation and calcined at 700ºC and the supported 20LaCoO3/ZrO2 catalyst showed lower carbon formation.Neste trabalho foram avaliadas as atividades dos catalisadores do tipo perovskita LaCoO3, frente à reação de reforma a vapor e oxidativa do etanol. Devido à baixa área superficial, característica esta dos óxidos do tipo perovskita, esses catalizadores foram suportados em Al2O3, ZrO2 e ZrO2-Al2O3. Os catalisadores não suportados foram preparados pelos métodos citrato e precipitação, já os suportados receberam o preparo necessário pelo método deposição-precipitação. Para a caracterização dos sólidos, as técnicas utilizadas foram as seguintes: Difração de Raios-X pelo método do pó (DRX), Fluorescência de Raios X (FRX), Redução à Temperatura Programada com H2 (RTP-H2), Adsorção de Nitrogênio pelo método B.E.T., Difração de Raios X in situ, Espectroscopia Raman, Microscopia eletrônica de transmissão, Microscopia eletrônica de varredura e Dessorção de hidrogênio a temperatura programada TPD-H2 e Análises Termogravimétricas. A preparação dos catalisadores pelas rotas de precipitação e citrato apresentou resultados eficientes para a obtenção dos óxidos do tipo perovskita. Os catalisadores suportados apresentaram valores de área superficial maiores do que os não suportados, uma vez que nesses últimos houve a formação de outras fases óxidas, devido às interações suporte-perovskita ou suporte-metal, verificadas pela diminuição no grau de redução, via análises de RTP. Os catalisadores não suportados, calcinados a 700, 800 e 900°C, apresentaram melhor atividade para a reação de reforma oxidativa, se comparados aos suportados. Estes últimos, por sua vez, apresentaram melhor atividade catalítica diante da reação de reforma oxidativa em relação à reforma a vapor do etanol. Por meio das análises obtidas pela Difração de Raios X in situ, realizadas durante a RTP-H2 e durante ensaios reacionais, observou-se que o catalisador 20LaCoO3/Al2O3, preparado pelo método 2 - deposição-precipitação apresentou tamanho menor de cristalito de cobalto durante as reações de reforma a vapor e oxidativa in situ, sugerindo uma melhor dispersão metálica. O catalisador não suportado LaCoO3, preparado pelo método de precipitação e calcinado a 700ºC, apresentou menor formação de coque diante da reação de reforma oxidativa do etanol. Entre os suportados, o composto 20LaCoO3/ZrO2 foi o que apresentou menor formação de coque nessa mesma reação. Os resultados das análises de microscopia eletrônica de varredura, realizadas após a reação oxidativa de espectroscopia Raman e Análises Termogravimétrica, sugerem que o catalisador não suportado LaCoO3 preparado por precipitação e calcinado a 700ºC, assim como o catalisador suportado 20LaCoO3/ZrO2 apresentaram menor formação de carbono.Universidade Federal de Sao Carlosapplication/pdfporUniversidade Federal de São CarlosPrograma de Pós-Graduação em Engenharia Química - PPGEQUFSCarBRCatálise heterogêneaEtanolHidrogênioReforma à vaporPerovskitaReformEthanolHydrogenPerovskiteENGENHARIAS::ENGENHARIA QUIMICAProdução de hidrogênio por reforma a vapor e oxidativa do etanol utilizando óxidos do tipo perovskitainfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFSCARinstname:Universidade Federal de São Carlos (UFSCAR)instacron:UFSCARORIGINAL5636.pdfapplication/pdf3745496https://{{ getenv "DSPACE_HOST" "repositorio.ufscar.br" }}/bitstream/ufscar/3940/1/5636.pdff5a3c6431b588da21fab339e8c763373MD51TEXT5636.pdf.txt5636.pdf.txtExtracted texttext/plain0https://{{ getenv "DSPACE_HOST" "repositorio.ufscar.br" }}/bitstream/ufscar/3940/2/5636.pdf.txtd41d8cd98f00b204e9800998ecf8427eMD52THUMBNAIL5636.pdf.jpg5636.pdf.jpgIM Thumbnailimage/jpeg6782https://{{ getenv "DSPACE_HOST" "repositorio.ufscar.br" }}/bitstream/ufscar/3940/3/5636.pdf.jpgabb78ea6999be941a987af63774da201MD53ufscar/39402019-09-11 04:12:39.312oai:repositorio.ufscar.br:ufscar/3940Repositório InstitucionalPUBhttps://repositorio.ufscar.br/oai/requestopendoar:43222023-05-25T12:47:58.934355Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR)false
dc.title.por.fl_str_mv Produção de hidrogênio por reforma a vapor e oxidativa do etanol utilizando óxidos do tipo perovskita
title Produção de hidrogênio por reforma a vapor e oxidativa do etanol utilizando óxidos do tipo perovskita
spellingShingle Produção de hidrogênio por reforma a vapor e oxidativa do etanol utilizando óxidos do tipo perovskita
Garcia, Silmara Rodrigues
Catálise heterogênea
Etanol
Hidrogênio
Reforma à vapor
Perovskita
Reform
Ethanol
Hydrogen
Perovskite
ENGENHARIAS::ENGENHARIA QUIMICA
title_short Produção de hidrogênio por reforma a vapor e oxidativa do etanol utilizando óxidos do tipo perovskita
title_full Produção de hidrogênio por reforma a vapor e oxidativa do etanol utilizando óxidos do tipo perovskita
title_fullStr Produção de hidrogênio por reforma a vapor e oxidativa do etanol utilizando óxidos do tipo perovskita
title_full_unstemmed Produção de hidrogênio por reforma a vapor e oxidativa do etanol utilizando óxidos do tipo perovskita
title_sort Produção de hidrogênio por reforma a vapor e oxidativa do etanol utilizando óxidos do tipo perovskita
author Garcia, Silmara Rodrigues
author_facet Garcia, Silmara Rodrigues
author_role author
dc.contributor.authorlattes.por.fl_str_mv http://lattes.cnpq.br/8510190431071866
dc.contributor.author.fl_str_mv Garcia, Silmara Rodrigues
dc.contributor.advisor1.fl_str_mv Assaf, José Mansur
dc.contributor.advisor1Lattes.fl_str_mv http://lattes.cnpq.br/9563312407691130
contributor_str_mv Assaf, José Mansur
dc.subject.por.fl_str_mv Catálise heterogênea
Etanol
Hidrogênio
Reforma à vapor
Perovskita
topic Catálise heterogênea
Etanol
Hidrogênio
Reforma à vapor
Perovskita
Reform
Ethanol
Hydrogen
Perovskite
ENGENHARIAS::ENGENHARIA QUIMICA
dc.subject.eng.fl_str_mv Reform
Ethanol
Hydrogen
Perovskite
dc.subject.cnpq.fl_str_mv ENGENHARIAS::ENGENHARIA QUIMICA
description This paper assesses the catalytic activities of LaCoO3 perovskite towards the steam reforming oxidative reaction of ethanol . Due to the low surface area which is commonly found on perovskite-type oxides , these were supported onAl2O3 , ZrO2 and ZrO2-Al2O3. The unsupported catalysts were prepared by precipitation and citrate methods whilst the supported catalysts were prepared by deposition -precipitation . The techniques employed to characterize the solids were: X -ray diffraction by the powder method (DRX) , X-Ray Fluorescence (FRX) Programmed Temperature Reduction with H2 (RTP-H2) Nitrogen Adsorption by B.E.T. method, X-ray Diffraction in situ, Raman spectroscopy, transmission electronic microscopy, scanning electronic microscopy, hydrogen desorption at programmed temperature TPD-H2 and Thermogravimetric Analysis. The preparation of the catalysts by precipitation and citrate routes proved to be efficient to obtain the perovskite type oxides .The supported catalysts showed surface area values larger than the unsupported ones, as there was the formation of other oxidase phases due to stand- perovskite or metal support interactions , as observed by the decreasing of reduction degree , through RTP analysis .The unsupported catalysts calcined at 700 , 800 and 900 ° C presented the best activity for oxidative reforming reaction than the supported ones. These, in turn, showed better catalytic activity towards the oxidative reforming reaction in relation to steam reforming of ethanol. By the X-ray Diffraction analysis in situ performed during the RTP-H2 and reaction tests, it was observed that the 20LaCoO3/Al2O3 catalyst prepared by method 2 - deposition -precipitation - showed lower size of crystallite of cobalt during the steam reforming reactions and oxidation in situ, therefore suggesting a better metal dispersion . The unsupported LaCoO3 catalyst prepared by precipitation method and calcined at 700ºC showed less coke formation towards the oxidative reaction of reforming of ethanol . Among the supported compounds the 20LaCoO3/ZrO2 showed the lowest coke formation in the same reaction. The analysis of scanning electron microscopy performed after the oxidative reaction, Raman spectroscopy the and Thermogravimetric Analysis, suggests that the unsupported LaCoO3 catalyst prepared by precipitation and calcined at 700ºC and the supported 20LaCoO3/ZrO2 catalyst showed lower carbon formation.
publishDate 2013
dc.date.issued.fl_str_mv 2013-10-17
dc.date.available.fl_str_mv 2014-02-07
2016-06-02T19:55:37Z
dc.date.accessioned.fl_str_mv 2016-06-02T19:55:37Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/doctoralThesis
format doctoralThesis
status_str publishedVersion
dc.identifier.citation.fl_str_mv GARCIA, Silmara Rodrigues. Produção de hidrogênio por reforma a vapor e oxidativa do etanol utilizando óxidos do tipo perovskita. 2013. 137 f. Tese (Doutorado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2013.
dc.identifier.uri.fl_str_mv https://repositorio.ufscar.br/handle/ufscar/3940
identifier_str_mv GARCIA, Silmara Rodrigues. Produção de hidrogênio por reforma a vapor e oxidativa do etanol utilizando óxidos do tipo perovskita. 2013. 137 f. Tese (Doutorado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2013.
url https://repositorio.ufscar.br/handle/ufscar/3940
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de São Carlos
dc.publisher.program.fl_str_mv Programa de Pós-Graduação em Engenharia Química - PPGEQ
dc.publisher.initials.fl_str_mv UFSCar
dc.publisher.country.fl_str_mv BR
publisher.none.fl_str_mv Universidade Federal de São Carlos
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFSCAR
instname:Universidade Federal de São Carlos (UFSCAR)
instacron:UFSCAR
instname_str Universidade Federal de São Carlos (UFSCAR)
instacron_str UFSCAR
institution UFSCAR
reponame_str Repositório Institucional da UFSCAR
collection Repositório Institucional da UFSCAR
bitstream.url.fl_str_mv https://{{ getenv "DSPACE_HOST" "repositorio.ufscar.br" }}/bitstream/ufscar/3940/1/5636.pdf
https://{{ getenv "DSPACE_HOST" "repositorio.ufscar.br" }}/bitstream/ufscar/3940/2/5636.pdf.txt
https://{{ getenv "DSPACE_HOST" "repositorio.ufscar.br" }}/bitstream/ufscar/3940/3/5636.pdf.jpg
bitstream.checksum.fl_str_mv f5a3c6431b588da21fab339e8c763373
d41d8cd98f00b204e9800998ecf8427e
abb78ea6999be941a987af63774da201
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
MD5
repository.name.fl_str_mv Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR)
repository.mail.fl_str_mv
_version_ 1767351080460484608