OBTENÇÃO DE COMPOSIÇÕES CERÂMICAS Mn-Ni-Co VIA SÍNTESE POR LIOFILIZAÇÃO E SUA CARACTERIZAÇÃO ELÉTRICA COMO SENSOR DE TEMPERATURA.

Detalhes bibliográficos
Ano de defesa: 2011
Autor(a) principal: Silva, Edson José Lima da lattes
Orientador(a): Pianaro, Sidnei Antonio lattes
Banca de defesa: Pukasiewicz, Anderson Geraldo Marenda lattes, Zara, Alfredo José lattes
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: UNIVERSIDADE ESTADUAL DE PONTA GROSSA
Programa de Pós-Graduação: Programa de Pós-Graduação em Engenharia e Ciências de Materiais
Departamento: Desenvolvimento e Caracterização de Materiais
País: BR
Palavras-chave em Português:
Palavras-chave em Inglês:
Área do conhecimento CNPq:
Link de acesso: http://tede2.uepg.br/jspui/handle/prefix/1413
Resumo: This work describes the preparation of nanoparticles of spinel structure, made from oxides of Manganese, Nickel and Cobalt, via lyophilization process, which was compared to the process of obtaining conventional mixture of oxides, in order to analyze different forms of preparation and its influence on electrical properties (characteristic resistance, temperature coefficient, stability of the thermistor), through the measures obtained by applying a voltage of 5 volts on pads and subjecting them to a temperature range of 20 C to 300 C, measured with a thermocouple type K The microstructures were analyzed by scanning electron microscopy (SEM), the average particle size ranged from 60 to 93 nm. X-ray spectroscopy to determine the phases present in the samples and analysis of infrared to identify in the process, organic waste and the organic phase transitions were completely volatilized during the controlled heating pad on high-temperature furnace (with resistance molybdenum silicide) (Lindenberg). Through the obtained results it was noted a certain advantage at all temperatures of the samples had the composition Ni Mn and Co on the Mn Ni which had only giving larger values between 4335 and 4571 for samples made from the process liofilization.
id UEPG_b072049d368ad48defbd489cb2bd5adb
oai_identifier_str oai:tede2.uepg.br:prefix/1413
network_acronym_str UEPG
network_name_str Biblioteca Digital de Teses e Dissertações da UEPG
repository_id_str
spelling Pianaro, Sidnei AntonioCPF:63221721900http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4782149Z6Pukasiewicz, Anderson Geraldo MarendaCPF:02075930945http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4767149D1Zara, Alfredo JoséCPF:96384328887http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787200T6CPF:03821033940http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4735461D9Silva, Edson José Lima da2017-07-21T20:42:36Z2012-12-202017-07-21T20:42:36Z2011-12-22SILVA, Edson José Lima da. OBTENÇÃO DE COMPOSIÇÕES CERÂMICAS Mn-Ni-Co VIA SÍNTESE POR LIOFILIZAÇÃO E SUA CARACTERIZAÇÃO ELÉTRICA COMO SENSOR DE TEMPERATURA.. 2011. 85 f. Dissertação (Mestrado em Desenvolvimento e Caracterização de Materiais) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2011.http://tede2.uepg.br/jspui/handle/prefix/1413This work describes the preparation of nanoparticles of spinel structure, made from oxides of Manganese, Nickel and Cobalt, via lyophilization process, which was compared to the process of obtaining conventional mixture of oxides, in order to analyze different forms of preparation and its influence on electrical properties (characteristic resistance, temperature coefficient, stability of the thermistor), through the measures obtained by applying a voltage of 5 volts on pads and subjecting them to a temperature range of 20 C to 300 C, measured with a thermocouple type K The microstructures were analyzed by scanning electron microscopy (SEM), the average particle size ranged from 60 to 93 nm. X-ray spectroscopy to determine the phases present in the samples and analysis of infrared to identify in the process, organic waste and the organic phase transitions were completely volatilized during the controlled heating pad on high-temperature furnace (with resistance molybdenum silicide) (Lindenberg). Through the obtained results it was noted a certain advantage at all temperatures of the samples had the composition Ni Mn and Co on the Mn Ni which had only giving larger values between 4335 and 4571 for samples made from the process liofilization.Este trabalho descreve a preparação de nanoparticulas de estrutura espinélio, feitas a partir de óxidos de Manganês, Níquel e Cobalto, via processo de liofilização, o qual foi comparado ao processo de obtenção convencional, mistura de óxidos, afim de se analisar diferentes formas de preparação e sua influência nas propriedades elétricas (resistência característica, coeficiente de temperatura, estabilidade do termistor), através das medidas obtidas aplicando-se uma tensão de 5 volts nas pastilhas e submetendo-as a uma variação de temperatura de 20C a 300C, aferidos com um termopar tipo K. As Microestruturas foram analisadas por microscopia eletrônica de varredura (MEV), o tamanho médio das partículas ficaram entre 60 a 93 nm. Espectroscopia de raios X para determinação das fases presentes nas amostras e análise de infravermelho para se identificar em que fase do processo os resíduos orgânicos e as transições de fases orgânicas foram totalmente volatilizados ao longo do aquecimento controlado das pastilhas em forno de alta temperatura (com resistência de siliceto de molibdênio) (Lindenberg). Através dos resultados obtidos notou-se uma certa vantagem em todas as temperaturas das amostras que tinham na composição Mn Ni e Co sobre as que tinham apenas Mn Ni dando valores de maiores, entre 4335 e 4571 para as amostras feitas a partir do processo de liofilização.Made available in DSpace on 2017-07-21T20:42:36Z (GMT). No. of bitstreams: 1 EDSON JOSE LIMA DA SILVA.pdf: 3364047 bytes, checksum: 8d0d1391435837a4f603477a06c59876 (MD5) Previous issue date: 2011-12-22application/pdfporUNIVERSIDADE ESTADUAL DE PONTA GROSSAPrograma de Pós-Graduação em Engenharia e Ciências de MateriaisUEPGBRDesenvolvimento e Caracterização de Materiaissensores de temperaturafreeze dryingLiofilização, óxidos de Mangânes Niquel e Cobaltotemperature sensorsfreeze dryingliofilizationmanganese oxides Nickel and CobaltCNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICAOBTENÇÃO DE COMPOSIÇÕES CERÂMICAS Mn-Ni-Co VIA SÍNTESE POR LIOFILIZAÇÃO E SUA CARACTERIZAÇÃO ELÉTRICA COMO SENSOR DE TEMPERATURA.info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UEPGinstname:Universidade Estadual de Ponta Grossa (UEPG)instacron:UEPGORIGINALEDSON JOSE LIMA DA SILVA.pdfapplication/pdf3364047http://tede2.uepg.br/jspui/bitstream/prefix/1413/1/EDSON%20JOSE%20LIMA%20DA%20SILVA.pdf8d0d1391435837a4f603477a06c59876MD51prefix/14132017-07-21 17:42:36.891oai:tede2.uepg.br:prefix/1413Biblioteca Digital de Teses e Dissertaçõeshttps://tede2.uepg.br/jspui/PUBhttp://tede2.uepg.br/oai/requestbicen@uepg.br||mv_fidelis@yahoo.com.bropendoar:2017-07-21T20:42:36Biblioteca Digital de Teses e Dissertações da UEPG - Universidade Estadual de Ponta Grossa (UEPG)false
dc.title.por.fl_str_mv OBTENÇÃO DE COMPOSIÇÕES CERÂMICAS Mn-Ni-Co VIA SÍNTESE POR LIOFILIZAÇÃO E SUA CARACTERIZAÇÃO ELÉTRICA COMO SENSOR DE TEMPERATURA.
title OBTENÇÃO DE COMPOSIÇÕES CERÂMICAS Mn-Ni-Co VIA SÍNTESE POR LIOFILIZAÇÃO E SUA CARACTERIZAÇÃO ELÉTRICA COMO SENSOR DE TEMPERATURA.
spellingShingle OBTENÇÃO DE COMPOSIÇÕES CERÂMICAS Mn-Ni-Co VIA SÍNTESE POR LIOFILIZAÇÃO E SUA CARACTERIZAÇÃO ELÉTRICA COMO SENSOR DE TEMPERATURA.
Silva, Edson José Lima da
sensores de temperatura
freeze drying
Liofilização, óxidos de Mangânes Niquel e Cobalto
temperature sensors
freeze drying
liofilization
manganese oxides Nickel and Cobalt
CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA
title_short OBTENÇÃO DE COMPOSIÇÕES CERÂMICAS Mn-Ni-Co VIA SÍNTESE POR LIOFILIZAÇÃO E SUA CARACTERIZAÇÃO ELÉTRICA COMO SENSOR DE TEMPERATURA.
title_full OBTENÇÃO DE COMPOSIÇÕES CERÂMICAS Mn-Ni-Co VIA SÍNTESE POR LIOFILIZAÇÃO E SUA CARACTERIZAÇÃO ELÉTRICA COMO SENSOR DE TEMPERATURA.
title_fullStr OBTENÇÃO DE COMPOSIÇÕES CERÂMICAS Mn-Ni-Co VIA SÍNTESE POR LIOFILIZAÇÃO E SUA CARACTERIZAÇÃO ELÉTRICA COMO SENSOR DE TEMPERATURA.
title_full_unstemmed OBTENÇÃO DE COMPOSIÇÕES CERÂMICAS Mn-Ni-Co VIA SÍNTESE POR LIOFILIZAÇÃO E SUA CARACTERIZAÇÃO ELÉTRICA COMO SENSOR DE TEMPERATURA.
title_sort OBTENÇÃO DE COMPOSIÇÕES CERÂMICAS Mn-Ni-Co VIA SÍNTESE POR LIOFILIZAÇÃO E SUA CARACTERIZAÇÃO ELÉTRICA COMO SENSOR DE TEMPERATURA.
author Silva, Edson José Lima da
author_facet Silva, Edson José Lima da
author_role author
dc.contributor.advisor1.fl_str_mv Pianaro, Sidnei Antonio
dc.contributor.advisor1ID.fl_str_mv CPF:63221721900
dc.contributor.advisor1Lattes.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4782149Z6
dc.contributor.referee1.fl_str_mv Pukasiewicz, Anderson Geraldo Marenda
dc.contributor.referee1ID.fl_str_mv CPF:02075930945
dc.contributor.referee1Lattes.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4767149D1
dc.contributor.referee2.fl_str_mv Zara, Alfredo José
dc.contributor.referee2ID.fl_str_mv CPF:96384328887
dc.contributor.referee2Lattes.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787200T6
dc.contributor.authorID.fl_str_mv CPF:03821033940
dc.contributor.authorLattes.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4735461D9
dc.contributor.author.fl_str_mv Silva, Edson José Lima da
contributor_str_mv Pianaro, Sidnei Antonio
Pukasiewicz, Anderson Geraldo Marenda
Zara, Alfredo José
dc.subject.por.fl_str_mv sensores de temperatura
freeze drying
Liofilização, óxidos de Mangânes Niquel e Cobalto
topic sensores de temperatura
freeze drying
Liofilização, óxidos de Mangânes Niquel e Cobalto
temperature sensors
freeze drying
liofilization
manganese oxides Nickel and Cobalt
CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA
dc.subject.eng.fl_str_mv temperature sensors
freeze drying
liofilization
manganese oxides Nickel and Cobalt
dc.subject.cnpq.fl_str_mv CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA
description This work describes the preparation of nanoparticles of spinel structure, made from oxides of Manganese, Nickel and Cobalt, via lyophilization process, which was compared to the process of obtaining conventional mixture of oxides, in order to analyze different forms of preparation and its influence on electrical properties (characteristic resistance, temperature coefficient, stability of the thermistor), through the measures obtained by applying a voltage of 5 volts on pads and subjecting them to a temperature range of 20 C to 300 C, measured with a thermocouple type K The microstructures were analyzed by scanning electron microscopy (SEM), the average particle size ranged from 60 to 93 nm. X-ray spectroscopy to determine the phases present in the samples and analysis of infrared to identify in the process, organic waste and the organic phase transitions were completely volatilized during the controlled heating pad on high-temperature furnace (with resistance molybdenum silicide) (Lindenberg). Through the obtained results it was noted a certain advantage at all temperatures of the samples had the composition Ni Mn and Co on the Mn Ni which had only giving larger values between 4335 and 4571 for samples made from the process liofilization.
publishDate 2011
dc.date.issued.fl_str_mv 2011-12-22
dc.date.available.fl_str_mv 2012-12-20
2017-07-21T20:42:36Z
dc.date.accessioned.fl_str_mv 2017-07-21T20:42:36Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.citation.fl_str_mv SILVA, Edson José Lima da. OBTENÇÃO DE COMPOSIÇÕES CERÂMICAS Mn-Ni-Co VIA SÍNTESE POR LIOFILIZAÇÃO E SUA CARACTERIZAÇÃO ELÉTRICA COMO SENSOR DE TEMPERATURA.. 2011. 85 f. Dissertação (Mestrado em Desenvolvimento e Caracterização de Materiais) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2011.
dc.identifier.uri.fl_str_mv http://tede2.uepg.br/jspui/handle/prefix/1413
identifier_str_mv SILVA, Edson José Lima da. OBTENÇÃO DE COMPOSIÇÕES CERÂMICAS Mn-Ni-Co VIA SÍNTESE POR LIOFILIZAÇÃO E SUA CARACTERIZAÇÃO ELÉTRICA COMO SENSOR DE TEMPERATURA.. 2011. 85 f. Dissertação (Mestrado em Desenvolvimento e Caracterização de Materiais) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2011.
url http://tede2.uepg.br/jspui/handle/prefix/1413
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv UNIVERSIDADE ESTADUAL DE PONTA GROSSA
dc.publisher.program.fl_str_mv Programa de Pós-Graduação em Engenharia e Ciências de Materiais
dc.publisher.initials.fl_str_mv UEPG
dc.publisher.country.fl_str_mv BR
dc.publisher.department.fl_str_mv Desenvolvimento e Caracterização de Materiais
publisher.none.fl_str_mv UNIVERSIDADE ESTADUAL DE PONTA GROSSA
dc.source.none.fl_str_mv reponame:Biblioteca Digital de Teses e Dissertações da UEPG
instname:Universidade Estadual de Ponta Grossa (UEPG)
instacron:UEPG
instname_str Universidade Estadual de Ponta Grossa (UEPG)
instacron_str UEPG
institution UEPG
reponame_str Biblioteca Digital de Teses e Dissertações da UEPG
collection Biblioteca Digital de Teses e Dissertações da UEPG
bitstream.url.fl_str_mv http://tede2.uepg.br/jspui/bitstream/prefix/1413/1/EDSON%20JOSE%20LIMA%20DA%20SILVA.pdf
bitstream.checksum.fl_str_mv 8d0d1391435837a4f603477a06c59876
bitstream.checksumAlgorithm.fl_str_mv MD5
repository.name.fl_str_mv Biblioteca Digital de Teses e Dissertações da UEPG - Universidade Estadual de Ponta Grossa (UEPG)
repository.mail.fl_str_mv bicen@uepg.br||mv_fidelis@yahoo.com.br
_version_ 1797039578975043584