Estudos e propriedades mecânicas de um novo tipo de bloco cerâmico híbrido para edificações em alvenarias estruturais
Ano de defesa: | 2012 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal do Rio Grande do Norte
|
Programa de Pós-Graduação: |
Programa de Pós-Graduação em Ciência e Engenharia de Materiais
|
Departamento: |
Processamento de Materiais a partir do Pó; Polímeros e Compósitos; Processamento de Materiais a part
|
País: |
BR
|
Palavras-chave em Português: | |
Palavras-chave em Inglês: | |
Área do conhecimento CNPq: | |
Link de acesso: | https://repositorio.ufrn.br/jspui/handle/123456789/12733 |
Resumo: | This dissertation presents a hybrid ceramic block the use of which reside in the buildings executed with walls. Initially, we conducted a survey on the requirements and / or norms prevailing in Brazil about structural ceramic blocks, making use of the experiences in other countries. This work seeks new materials and / or products in order to maintain or increase the compressive strength of the ceramic blocks, without neglecting the other properties. Then was collected materials (clay and crushed powder) and an approach on the characterization, through fluorescence, Mineralogy, vitrification curve and characterization of these materials used in the manufacture of the blocks by Ray Diffraction "X" and SEM. Subsequently it was made, numbered and measured dimensions of about 150 bodies of the test piece (hybrid ceramic blocks in small sizes) with varying percentages of 0%, 5%, 10% and 15% substitution of crushed clay powder. After sintering of the bodies of the test piece at temperatures of 900oC, 1000oC 1100oC and with a heating rate of 5oC/minuto and level of 1 hour, the samples were submitted to the tests (compressive strength and water absorption) and calculated their retractions, which were subsequently carried out the analysis of the results according to the criteria and parameters required by Brazilian legislation and standards in force |
id |
UFRN_6db5ec9429285ae7f110ec2ae066fc15 |
---|---|
oai_identifier_str |
oai:https://repositorio.ufrn.br:123456789/12733 |
network_acronym_str |
UFRN |
network_name_str |
Repositório Institucional da UFRN |
repository_id_str |
|
spelling |
Câmara, Cássio Freirehttp://lattes.cnpq.br/8775224544710819http://lattes.cnpq.br/9858094266525225Chaves, Leonardo Flamarion MarquesSilva, Elialdo Chibério dahttp://lattes.cnpq.br/5426129339908081Silva, Gilson Garcia dahttp://lattes.cnpq.br/8681275097040450Gomes, Uilame Umbelino2014-12-17T14:07:00Z2012-06-082014-12-17T14:07:00Z2012-02-09CÂMARA, Cássio Freire. Estudos e propriedades mecânicas de um novo tipo de bloco cerâmico híbrido para edificações em alvenarias estruturais. 2012. 88 f. Dissertação (Mestrado em Processamento de Materiais a partir do Pó; Polímeros e Compósitos; Processamento de Materiais a part) - Universidade Federal do Rio Grande do Norte, Natal, 2012.https://repositorio.ufrn.br/jspui/handle/123456789/12733This dissertation presents a hybrid ceramic block the use of which reside in the buildings executed with walls. Initially, we conducted a survey on the requirements and / or norms prevailing in Brazil about structural ceramic blocks, making use of the experiences in other countries. This work seeks new materials and / or products in order to maintain or increase the compressive strength of the ceramic blocks, without neglecting the other properties. Then was collected materials (clay and crushed powder) and an approach on the characterization, through fluorescence, Mineralogy, vitrification curve and characterization of these materials used in the manufacture of the blocks by Ray Diffraction "X" and SEM. Subsequently it was made, numbered and measured dimensions of about 150 bodies of the test piece (hybrid ceramic blocks in small sizes) with varying percentages of 0%, 5%, 10% and 15% substitution of crushed clay powder. After sintering of the bodies of the test piece at temperatures of 900oC, 1000oC 1100oC and with a heating rate of 5oC/minuto and level of 1 hour, the samples were submitted to the tests (compressive strength and water absorption) and calculated their retractions, which were subsequently carried out the analysis of the results according to the criteria and parameters required by Brazilian legislation and standards in forceEsta dissertação apresenta um bloco cerâmico híbrido cuja utilização reside nas edificações executadas com alvenarias estruturais. Inicialmente, foi realizada uma pesquisa sobre as exigências e/ou normatizações vigentes no Brasil a cerca de blocos cerâmicos estruturais, fazendo uso das experiências nos outros países. Este trabalho busca novos materiais e/ou produtos com a finalidade de manter ou elevar a resistência à compressão dos blocos cerâmicos, sem desprezar as demais propriedades. Em seguida, foi realizada coleta dos materiais (argila e pó de brita) e uma abordagem acerca da caracterização, através da Fluorescência, Mineralogia, Curva de Gresificação e Caracterização destes materiais utilizados na confecção dos blocos, através da Difração de Raio X e MEV. Posteriormente, foram confeccionados, numerados e medidos as dimensões de aproximadamente 150 corpos-de-prova (blocos cerâmicos híbridos em tamanhos reduzidos) com percentuais que variam de 0%, 5%, 10% e 15% de substituição de pó de brita a argila. Após a sinterização dos corpos-de-prova a temperaturas de 900oC, 1000oC e 1100oC com taxa de aquecimento de 5oC/minuto e patamar de 1 hora, as amostras foram encaminhadas para a realização dos ensaios (resistência a compressão e absorção de água) e calculado as respectivas retrações, que posteriormente foram realizados as analises dos resultados de acordo com os critérios e parâmetros exigidos pelas Normas e Legislação brasileira vigenteapplication/pdfporUniversidade Federal do Rio Grande do NortePrograma de Pós-Graduação em Ciência e Engenharia de MateriaisUFRNBRProcessamento de Materiais a partir do Pó; Polímeros e Compósitos; Processamento de Materiais a partResíduos de construção civilReciclagemArgilaMasonry structuresBuilding wasteRecyclingCNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICAEstudos e propriedades mecânicas de um novo tipo de bloco cerâmico híbrido para edificações em alvenarias estruturaisinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFRNinstname:Universidade Federal do Rio Grande do Norte (UFRN)instacron:UFRNORIGINALCassioFC_DISSERT.pdfapplication/pdf3473717https://repositorio.ufrn.br/bitstream/123456789/12733/1/CassioFC_DISSERT.pdf62553a61815c3d6ecf0b6b9390381d0cMD51TEXTCassioFC_DISSERT.pdf.txtCassioFC_DISSERT.pdf.txtExtracted texttext/plain119263https://repositorio.ufrn.br/bitstream/123456789/12733/6/CassioFC_DISSERT.pdf.txt3adf62421c6bf8a5caf6a571ce56f343MD56THUMBNAILCassioFC_DISSERT.pdf.jpgCassioFC_DISSERT.pdf.jpgIM Thumbnailimage/jpeg5307https://repositorio.ufrn.br/bitstream/123456789/12733/7/CassioFC_DISSERT.pdf.jpgfe4cc3af255f72d793cfd474286488d7MD57123456789/127332017-11-01 07:28:14.127oai:https://repositorio.ufrn.br:123456789/12733Repositório de PublicaçõesPUBhttp://repositorio.ufrn.br/oai/opendoar:2017-11-01T10:28:14Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN)false |
dc.title.por.fl_str_mv |
Estudos e propriedades mecânicas de um novo tipo de bloco cerâmico híbrido para edificações em alvenarias estruturais |
title |
Estudos e propriedades mecânicas de um novo tipo de bloco cerâmico híbrido para edificações em alvenarias estruturais |
spellingShingle |
Estudos e propriedades mecânicas de um novo tipo de bloco cerâmico híbrido para edificações em alvenarias estruturais Câmara, Cássio Freire Resíduos de construção civil Reciclagem Argila Masonry structures Building waste Recycling CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
title_short |
Estudos e propriedades mecânicas de um novo tipo de bloco cerâmico híbrido para edificações em alvenarias estruturais |
title_full |
Estudos e propriedades mecânicas de um novo tipo de bloco cerâmico híbrido para edificações em alvenarias estruturais |
title_fullStr |
Estudos e propriedades mecânicas de um novo tipo de bloco cerâmico híbrido para edificações em alvenarias estruturais |
title_full_unstemmed |
Estudos e propriedades mecânicas de um novo tipo de bloco cerâmico híbrido para edificações em alvenarias estruturais |
title_sort |
Estudos e propriedades mecânicas de um novo tipo de bloco cerâmico híbrido para edificações em alvenarias estruturais |
author |
Câmara, Cássio Freire |
author_facet |
Câmara, Cássio Freire |
author_role |
author |
dc.contributor.authorID.por.fl_str_mv |
|
dc.contributor.authorLattes.por.fl_str_mv |
http://lattes.cnpq.br/8775224544710819 |
dc.contributor.advisorID.por.fl_str_mv |
|
dc.contributor.advisorLattes.por.fl_str_mv |
http://lattes.cnpq.br/9858094266525225 |
dc.contributor.referees1.pt_BR.fl_str_mv |
Chaves, Leonardo Flamarion Marques |
dc.contributor.referees1ID.por.fl_str_mv |
|
dc.contributor.referees2.pt_BR.fl_str_mv |
Silva, Elialdo Chibério da |
dc.contributor.referees2ID.por.fl_str_mv |
|
dc.contributor.referees2Lattes.por.fl_str_mv |
http://lattes.cnpq.br/5426129339908081 |
dc.contributor.referees3.pt_BR.fl_str_mv |
Silva, Gilson Garcia da |
dc.contributor.referees3ID.por.fl_str_mv |
|
dc.contributor.referees3Lattes.por.fl_str_mv |
http://lattes.cnpq.br/8681275097040450 |
dc.contributor.author.fl_str_mv |
Câmara, Cássio Freire |
dc.contributor.advisor1.fl_str_mv |
Gomes, Uilame Umbelino |
contributor_str_mv |
Gomes, Uilame Umbelino |
dc.subject.por.fl_str_mv |
Resíduos de construção civil Reciclagem Argila |
topic |
Resíduos de construção civil Reciclagem Argila Masonry structures Building waste Recycling CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
dc.subject.eng.fl_str_mv |
Masonry structures Building waste Recycling |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
description |
This dissertation presents a hybrid ceramic block the use of which reside in the buildings executed with walls. Initially, we conducted a survey on the requirements and / or norms prevailing in Brazil about structural ceramic blocks, making use of the experiences in other countries. This work seeks new materials and / or products in order to maintain or increase the compressive strength of the ceramic blocks, without neglecting the other properties. Then was collected materials (clay and crushed powder) and an approach on the characterization, through fluorescence, Mineralogy, vitrification curve and characterization of these materials used in the manufacture of the blocks by Ray Diffraction "X" and SEM. Subsequently it was made, numbered and measured dimensions of about 150 bodies of the test piece (hybrid ceramic blocks in small sizes) with varying percentages of 0%, 5%, 10% and 15% substitution of crushed clay powder. After sintering of the bodies of the test piece at temperatures of 900oC, 1000oC 1100oC and with a heating rate of 5oC/minuto and level of 1 hour, the samples were submitted to the tests (compressive strength and water absorption) and calculated their retractions, which were subsequently carried out the analysis of the results according to the criteria and parameters required by Brazilian legislation and standards in force |
publishDate |
2012 |
dc.date.available.fl_str_mv |
2012-06-08 2014-12-17T14:07:00Z |
dc.date.issued.fl_str_mv |
2012-02-09 |
dc.date.accessioned.fl_str_mv |
2014-12-17T14:07:00Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
CÂMARA, Cássio Freire. Estudos e propriedades mecânicas de um novo tipo de bloco cerâmico híbrido para edificações em alvenarias estruturais. 2012. 88 f. Dissertação (Mestrado em Processamento de Materiais a partir do Pó; Polímeros e Compósitos; Processamento de Materiais a part) - Universidade Federal do Rio Grande do Norte, Natal, 2012. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufrn.br/jspui/handle/123456789/12733 |
identifier_str_mv |
CÂMARA, Cássio Freire. Estudos e propriedades mecânicas de um novo tipo de bloco cerâmico híbrido para edificações em alvenarias estruturais. 2012. 88 f. Dissertação (Mestrado em Processamento de Materiais a partir do Pó; Polímeros e Compósitos; Processamento de Materiais a part) - Universidade Federal do Rio Grande do Norte, Natal, 2012. |
url |
https://repositorio.ufrn.br/jspui/handle/123456789/12733 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal do Rio Grande do Norte |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Ciência e Engenharia de Materiais |
dc.publisher.initials.fl_str_mv |
UFRN |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Processamento de Materiais a partir do Pó; Polímeros e Compósitos; Processamento de Materiais a part |
publisher.none.fl_str_mv |
Universidade Federal do Rio Grande do Norte |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFRN instname:Universidade Federal do Rio Grande do Norte (UFRN) instacron:UFRN |
instname_str |
Universidade Federal do Rio Grande do Norte (UFRN) |
instacron_str |
UFRN |
institution |
UFRN |
reponame_str |
Repositório Institucional da UFRN |
collection |
Repositório Institucional da UFRN |
bitstream.url.fl_str_mv |
https://repositorio.ufrn.br/bitstream/123456789/12733/1/CassioFC_DISSERT.pdf https://repositorio.ufrn.br/bitstream/123456789/12733/6/CassioFC_DISSERT.pdf.txt https://repositorio.ufrn.br/bitstream/123456789/12733/7/CassioFC_DISSERT.pdf.jpg |
bitstream.checksum.fl_str_mv |
62553a61815c3d6ecf0b6b9390381d0c 3adf62421c6bf8a5caf6a571ce56f343 fe4cc3af255f72d793cfd474286488d7 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN) |
repository.mail.fl_str_mv |
|
_version_ |
1797777816802033664 |