Desempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturado
Ano de defesa: | 2010 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal do Rio Grande do Norte
|
Programa de Pós-Graduação: |
Programa de Pós-Graduação em Engenharia Mecânica
|
Departamento: |
Tecnologia de Materiais; Projetos Mecânicos; Termociências
|
País: |
BR
|
Palavras-chave em Português: | |
Palavras-chave em Inglês: | |
Área do conhecimento CNPq: | |
Link de acesso: | https://repositorio.ufrn.br/jspui/handle/123456789/15630 |
Resumo: | With the objective to promote sustainable development, the fibres found in nature in abundance, which are biodegradable, of low cost in comparison to synthetic fibres are being used in the manufacture of composites. The mechanical behavior of the curauá and pineapple leaf fibre (PALF) composites in different proportions, 25% x 75% (P1), 50% x 50% (P2) e 75% x 25% (P3) were respectively studied, being initially treated with a 2% aqueous solution of sodium hydroxide. Mechanical analyses indicated that with respect to studies of traction, for the combination of P1 and P3, better results of 22.17 MPa and 16.98 MPa, were obtained respectively, which are higher than that of the combination P2. The results of the same pattern were obtained for analysis of bending resistance where P1 is 1.21% and P3 represents 0.96%. In the case of resistance to bending, best results were obtained for the combination P1 at 49.07 MPa. However, when Young's modulus values were calculated, the values were different to the pattern of the results of other tests, where the combination P2 with the value of 4.06 GPa is greater than the other combinations. This shows that the PALF had a greater influence in relation to curauá fibre. The analysis of the results generally shows that in combinations of two vegetable fibers of cellulosic origin, the fiber which shows higher percentage (75%) is the best option than to the composition of 50%/50%. In the meantime, according to the results obtained in this study, in the case where the application should withstand bending loads, the better composition would be 50%/50% |
id |
UFRN_ec82ed3561674922102a397a6ebc0928 |
---|---|
oai_identifier_str |
oai:https://repositorio.ufrn.br:123456789/15630 |
network_acronym_str |
UFRN |
network_name_str |
Repositório Institucional da UFRN |
repository_id_str |
|
spelling |
Martins Neto, José Antôniohttp://lattes.cnpq.br/3016862084500942http://lattes.cnpq.br/8553209522282182Souza, Luiz Guilherme Meira dehttp://lattes.cnpq.br/0801747108308706Lima, José de Anchietahttp://lattes.cnpq.br/0742445504420593Souza, Roberto Silva dehttp://lattes.cnpq.br/4012782800846844Ladchumananandasivam, Rasiah2014-12-17T14:58:04Z2011-05-042014-12-17T14:58:04Z2010-12-30MARTINS NETO, José Antônio. Desempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturado. 2010. 89 f. Dissertação (Mestrado em Tecnologia de Materiais; Projetos Mecânicos; Termociências) - Universidade Federal do Rio Grande do Norte, Natal, 2010.https://repositorio.ufrn.br/jspui/handle/123456789/15630With the objective to promote sustainable development, the fibres found in nature in abundance, which are biodegradable, of low cost in comparison to synthetic fibres are being used in the manufacture of composites. The mechanical behavior of the curauá and pineapple leaf fibre (PALF) composites in different proportions, 25% x 75% (P1), 50% x 50% (P2) e 75% x 25% (P3) were respectively studied, being initially treated with a 2% aqueous solution of sodium hydroxide. Mechanical analyses indicated that with respect to studies of traction, for the combination of P1 and P3, better results of 22.17 MPa and 16.98 MPa, were obtained respectively, which are higher than that of the combination P2. The results of the same pattern were obtained for analysis of bending resistance where P1 is 1.21% and P3 represents 0.96%. In the case of resistance to bending, best results were obtained for the combination P1 at 49.07 MPa. However, when Young's modulus values were calculated, the values were different to the pattern of the results of other tests, where the combination P2 with the value of 4.06 GPa is greater than the other combinations. This shows that the PALF had a greater influence in relation to curauá fibre. The analysis of the results generally shows that in combinations of two vegetable fibers of cellulosic origin, the fiber which shows higher percentage (75%) is the best option than to the composition of 50%/50%. In the meantime, according to the results obtained in this study, in the case where the application should withstand bending loads, the better composition would be 50%/50%Com o objetivo de promover o desenvolvimento sustentável, as fibras encontradas em abundância na natureza, que são biodegradáveis e de baixo custo quando comparado com as fibras sintéticas, vem sendo utilizadas na aplicação de produção de compósitos. Neste trabalho foi analisado o comportamento mecânico à partir do ensaio de tração e flexão, em um compósito híbrido tendo como matriz uma resina sintética ortoftálica reforçada com fibras de curauá e fibras da folha de abacaxizeiro (PALF), nas proporções de 25% x 75% (P1), 50% x 50% (P2) e 75% x 25% (P3), respectivamente, com as fibras de curauá e as fibras da folha do abacaxizeiro sendo tratadas quimicamente por uma solução aquosa de hidróxido de sódio (NaOH) com 8% de concentração. As análises mecânicas indicaram que com relação aos estudos de tração, para a combinação P1 e P3, foram obtidas melhores resultados de 22,17 MPa e 16,98 MPa, respectivamente, que é maior que da outra combinação de P2. Os resultados do mesmo padrão foram obtidos para análise de flexão onde P1 é 1,21% e P3 de 0,96% que são maiores do que o resultado obtido da combinação P2. No caso de resistência à flexão, melhores resultados foram obtidos para a combinação P1 de 49,07 MPa. Mas, quando foi calculado o módulo de Young, os valores foram diferentes do padrão dos resultados dos outros testes realizados, com a combinação P2 com o valor de 4,06 GPa que é maior que das outras combinações. Isto mostra que as fibras PALF tiveram uma influência maior com relação à fibra de curauá. A análise dos resultados em geral demonstra que nas combinações de duas fibras vegetais celulósicas, uma ou a outra fibra com porcentagem maior (75%) é a melhor opção do que na composição de 50%/50%, entretanto no caso onde a aplicação será para suportar cargas de flexão, a melhor composição seria 50%/50%application/pdfporUniversidade Federal do Rio Grande do NortePrograma de Pós-Graduação em Engenharia MecânicaUFRNBRTecnologia de Materiais; Projetos Mecânicos; TermociênciasFibra naturalFibra vegetalCurauáFibra de folha de abacaxi (PALF)Propriedades mecânicasCompósitos híbridosNatural fibrevegetable fibreCurauáPineapple leaf fibre (PALF)Mechanical propertiesHybrid compositesCNPQ::ENGENHARIAS::ENGENHARIA MECANICADesempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturadoinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFRNinstname:Universidade Federal do Rio Grande do Norte (UFRN)instacron:UFRNORIGINALJoseAMN_DISSERT.pdfapplication/pdf2578831https://repositorio.ufrn.br/bitstream/123456789/15630/1/JoseAMN_DISSERT.pdf78ca7925672b7876fad1b54e774b3827MD51TEXTJoseAMN_DISSERT.pdf.txtJoseAMN_DISSERT.pdf.txtExtracted texttext/plain128760https://repositorio.ufrn.br/bitstream/123456789/15630/6/JoseAMN_DISSERT.pdf.txt643af6430f06e4de8a5e6d0ccd3511e2MD56THUMBNAILJoseAMN_DISSERT.pdf.jpgJoseAMN_DISSERT.pdf.jpgIM Thumbnailimage/jpeg1942https://repositorio.ufrn.br/bitstream/123456789/15630/7/JoseAMN_DISSERT.pdf.jpge6d05a360a9d16eb5e0afa9fdc190696MD57123456789/156302017-11-01 21:07:58.72oai:https://repositorio.ufrn.br:123456789/15630Repositório de PublicaçõesPUBhttp://repositorio.ufrn.br/oai/opendoar:2017-11-02T00:07:58Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN)false |
dc.title.por.fl_str_mv |
Desempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturado |
title |
Desempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturado |
spellingShingle |
Desempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturado Martins Neto, José Antônio Fibra natural Fibra vegetal Curauá Fibra de folha de abacaxi (PALF) Propriedades mecânicas Compósitos híbridos Natural fibre vegetable fibre Curauá Pineapple leaf fibre (PALF) Mechanical properties Hybrid composites CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
title_short |
Desempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturado |
title_full |
Desempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturado |
title_fullStr |
Desempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturado |
title_full_unstemmed |
Desempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturado |
title_sort |
Desempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturado |
author |
Martins Neto, José Antônio |
author_facet |
Martins Neto, José Antônio |
author_role |
author |
dc.contributor.authorID.por.fl_str_mv |
|
dc.contributor.authorLattes.por.fl_str_mv |
http://lattes.cnpq.br/3016862084500942 |
dc.contributor.advisorID.por.fl_str_mv |
|
dc.contributor.advisorLattes.por.fl_str_mv |
http://lattes.cnpq.br/8553209522282182 |
dc.contributor.referees1.pt_BR.fl_str_mv |
Souza, Luiz Guilherme Meira de |
dc.contributor.referees1ID.por.fl_str_mv |
|
dc.contributor.referees1Lattes.por.fl_str_mv |
http://lattes.cnpq.br/0801747108308706 |
dc.contributor.referees2.pt_BR.fl_str_mv |
Lima, José de Anchieta |
dc.contributor.referees2ID.por.fl_str_mv |
|
dc.contributor.referees2Lattes.por.fl_str_mv |
http://lattes.cnpq.br/0742445504420593 |
dc.contributor.referees3.pt_BR.fl_str_mv |
Souza, Roberto Silva de |
dc.contributor.referees3ID.por.fl_str_mv |
|
dc.contributor.referees3Lattes.por.fl_str_mv |
http://lattes.cnpq.br/4012782800846844 |
dc.contributor.author.fl_str_mv |
Martins Neto, José Antônio |
dc.contributor.advisor1.fl_str_mv |
Ladchumananandasivam, Rasiah |
contributor_str_mv |
Ladchumananandasivam, Rasiah |
dc.subject.por.fl_str_mv |
Fibra natural Fibra vegetal Curauá Fibra de folha de abacaxi (PALF) Propriedades mecânicas Compósitos híbridos |
topic |
Fibra natural Fibra vegetal Curauá Fibra de folha de abacaxi (PALF) Propriedades mecânicas Compósitos híbridos Natural fibre vegetable fibre Curauá Pineapple leaf fibre (PALF) Mechanical properties Hybrid composites CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
dc.subject.eng.fl_str_mv |
Natural fibre vegetable fibre Curauá Pineapple leaf fibre (PALF) Mechanical properties Hybrid composites |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
description |
With the objective to promote sustainable development, the fibres found in nature in abundance, which are biodegradable, of low cost in comparison to synthetic fibres are being used in the manufacture of composites. The mechanical behavior of the curauá and pineapple leaf fibre (PALF) composites in different proportions, 25% x 75% (P1), 50% x 50% (P2) e 75% x 25% (P3) were respectively studied, being initially treated with a 2% aqueous solution of sodium hydroxide. Mechanical analyses indicated that with respect to studies of traction, for the combination of P1 and P3, better results of 22.17 MPa and 16.98 MPa, were obtained respectively, which are higher than that of the combination P2. The results of the same pattern were obtained for analysis of bending resistance where P1 is 1.21% and P3 represents 0.96%. In the case of resistance to bending, best results were obtained for the combination P1 at 49.07 MPa. However, when Young's modulus values were calculated, the values were different to the pattern of the results of other tests, where the combination P2 with the value of 4.06 GPa is greater than the other combinations. This shows that the PALF had a greater influence in relation to curauá fibre. The analysis of the results generally shows that in combinations of two vegetable fibers of cellulosic origin, the fiber which shows higher percentage (75%) is the best option than to the composition of 50%/50%. In the meantime, according to the results obtained in this study, in the case where the application should withstand bending loads, the better composition would be 50%/50% |
publishDate |
2010 |
dc.date.issued.fl_str_mv |
2010-12-30 |
dc.date.available.fl_str_mv |
2011-05-04 2014-12-17T14:58:04Z |
dc.date.accessioned.fl_str_mv |
2014-12-17T14:58:04Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
MARTINS NETO, José Antônio. Desempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturado. 2010. 89 f. Dissertação (Mestrado em Tecnologia de Materiais; Projetos Mecânicos; Termociências) - Universidade Federal do Rio Grande do Norte, Natal, 2010. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufrn.br/jspui/handle/123456789/15630 |
identifier_str_mv |
MARTINS NETO, José Antônio. Desempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturado. 2010. 89 f. Dissertação (Mestrado em Tecnologia de Materiais; Projetos Mecânicos; Termociências) - Universidade Federal do Rio Grande do Norte, Natal, 2010. |
url |
https://repositorio.ufrn.br/jspui/handle/123456789/15630 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal do Rio Grande do Norte |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Mecânica |
dc.publisher.initials.fl_str_mv |
UFRN |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Tecnologia de Materiais; Projetos Mecânicos; Termociências |
publisher.none.fl_str_mv |
Universidade Federal do Rio Grande do Norte |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFRN instname:Universidade Federal do Rio Grande do Norte (UFRN) instacron:UFRN |
instname_str |
Universidade Federal do Rio Grande do Norte (UFRN) |
instacron_str |
UFRN |
institution |
UFRN |
reponame_str |
Repositório Institucional da UFRN |
collection |
Repositório Institucional da UFRN |
bitstream.url.fl_str_mv |
https://repositorio.ufrn.br/bitstream/123456789/15630/1/JoseAMN_DISSERT.pdf https://repositorio.ufrn.br/bitstream/123456789/15630/6/JoseAMN_DISSERT.pdf.txt https://repositorio.ufrn.br/bitstream/123456789/15630/7/JoseAMN_DISSERT.pdf.jpg |
bitstream.checksum.fl_str_mv |
78ca7925672b7876fad1b54e774b3827 643af6430f06e4de8a5e6d0ccd3511e2 e6d05a360a9d16eb5e0afa9fdc190696 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN) |
repository.mail.fl_str_mv |
|
_version_ |
1797777689248006144 |