Estudo da luminescência persistente em cerâmicas de Sr(1-y-z)BxAl(2-x)O4:Euy,Dyz sinterizadas a laser
Ano de defesa: | 2015 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal de Sergipe
|
Programa de Pós-Graduação: |
Pós-Graduação em Física
|
Departamento: |
Não Informado pela instituição
|
País: |
BR
|
Palavras-chave em Português: | |
Área do conhecimento CNPq: | |
Link de acesso: | https://ri.ufs.br/handle/riufs/5327 |
Resumo: | Materials that have light emission for a long period of time even after ceasing the excitation attract curiosity of scientists for a long time. This phenomenon is named persistent luminescence and it has obtained scientific and technological visibility due to its great potential of applications. Among the materials that present this phenomena, it can be cited the strontium aluminate (SrAl2O4) that, when doped or co-doped with rare earth ions, presents naked eye visible persistent luminescence. On the other hand, the boron addition in the SrAl2O4 lattice has been studied due to contribution onto optical and structural properties. Additionally, in order to optimize the physical and chemical properties of the ceramic materials, several synthesis and sintering methods have been used. Among these methods, the laser sintering technique, which a CO2 laser as used as the main heat source, has been presented as an important method for the sintering of ceramic materials. In this work, it was studied the boron influence about the physical properties, particularly on the optical and structural properties, in laser sintered Sr1-y-zBxAl2-xO4:Euy,Dyz (SABED) ceramics. The SABED powders synthesis was developed by the Pechini´s method and analysed by the differential thermal analysis, thermogravimetry and X-Ray diffraction techniques. The SABED ceramics showed good microstructural homogeneity and transparency of up to 50% when sintered at a density power of (3.1 + 0.3) W/mm2 for 30 s. In all the samples were observed a good naked eye visible luminescence intensity for up to 10 minutes, with a characteristic Eu2+ band emission (centered at 512 nm). It is important to note that throughout process was performed at open atmosphere. Finally, the boron addition contributed significantly to improve the microstructure, transparency and naked eye luminescence intensity. |
id |
UFS-2_2d3a74ae0f116770a0afa98cfb7f10a6 |
---|---|
oai_identifier_str |
oai:ufs.br:riufs/5327 |
network_acronym_str |
UFS-2 |
network_name_str |
Repositório Institucional da UFS |
repository_id_str |
|
spelling |
Alves, Ylla Grasielle dos Santoshttp://lattes.cnpq.br/4548331237405072Silva, Ronaldo Santos dahttp://lattes.cnpq.br/21965548650466472017-09-26T18:27:26Z2017-09-26T18:27:26Z2015-02-26ALVES, Ylla Grasielle dos Santos. Estudo da luminescência persistente em cerâmicas de Sr(1-y-z)BxAl(2-x)O4:Euy,Dyz sinterizadas a laser. 2015. 93 f. Dissertação (Mestrado em Física) - Universidade Federal de Sergipe, São Cristóvão, 2015.https://ri.ufs.br/handle/riufs/5327Materials that have light emission for a long period of time even after ceasing the excitation attract curiosity of scientists for a long time. This phenomenon is named persistent luminescence and it has obtained scientific and technological visibility due to its great potential of applications. Among the materials that present this phenomena, it can be cited the strontium aluminate (SrAl2O4) that, when doped or co-doped with rare earth ions, presents naked eye visible persistent luminescence. On the other hand, the boron addition in the SrAl2O4 lattice has been studied due to contribution onto optical and structural properties. Additionally, in order to optimize the physical and chemical properties of the ceramic materials, several synthesis and sintering methods have been used. Among these methods, the laser sintering technique, which a CO2 laser as used as the main heat source, has been presented as an important method for the sintering of ceramic materials. In this work, it was studied the boron influence about the physical properties, particularly on the optical and structural properties, in laser sintered Sr1-y-zBxAl2-xO4:Euy,Dyz (SABED) ceramics. The SABED powders synthesis was developed by the Pechini´s method and analysed by the differential thermal analysis, thermogravimetry and X-Ray diffraction techniques. The SABED ceramics showed good microstructural homogeneity and transparency of up to 50% when sintered at a density power of (3.1 + 0.3) W/mm2 for 30 s. In all the samples were observed a good naked eye visible luminescence intensity for up to 10 minutes, with a characteristic Eu2+ band emission (centered at 512 nm). It is important to note that throughout process was performed at open atmosphere. Finally, the boron addition contributed significantly to improve the microstructure, transparency and naked eye luminescence intensity.Materiais que apresentam emissão de luz por um longo período de tempo, mesmo após cessada a excitação, atraem a curiosidade de cientistas há muito tempo. Este fenômeno, ao qual dar-se o nome de luminescência persistente, tem ganhado bastante visibilidade científica e tecnológica devido ao seu grande potencial de aplicação. Dentre os materiais que apresentam esse fenômeno, o aluminato de estrôncio (SrAl2O4) que, quando dopado e codopado com íons terras raras, apresenta luminescência persistente visível a olho nu. Por outro lado, a adição de boro no SrAl2O4 vem sendo bastante estudada devido as suas significativas contribuições nas propriedades ópticas e estruturais. Adicionalmente, com o objetivo de otimizar as propriedades físicas e químicas de materiais cerâmicos, diversos métodos de síntese e sinterização vem sendo aplicados. Dentre esses métodos a técnica de sinterização a laser, que baseia-se na utilização de um laser de CO2 como principal fonte de calor, tem sido apresentada como um importante método para sinterização de materiais cerâmicos. Neste trabalho foi investigada a influência do boro nas propriedades físicas, principalmente óptica e estrutural, de cerâmicas de Sr1-y-zBxAl2-xO4: Euy, Dyz (SABED) sinterizadas a laser. A síntese dos pós de SABED foi feita pelo método de Pechini e analisadas pelas técnicas de Análise térmica diferencial, Termogravimetria e Difração por Raios X. As cerâmicas de SABED apresentaram boa homogeneidade microestrutural e transparência de até 50% quando sinterizadas a uma densidade de potência de (3,1 + 0,3) W/mm2 com tempo de patamar de 30 segundos. Em todas as amostras foi observada uma boa intensidade luminescente, visível a olho nu por até 10min, com banda de emissão característica do Eu2+ (centrada em 512nm). É importante ressaltar que todo o processo foi realizado em atmosfera aberta. Finalmente, a adição de boro melhorou significativamente a microestrutura, transparência e a intensidade luminescente a olho nu.Coordenação de Aperfeiçoamento de Pessoal de Nível Superiorapplication/pdfporUniversidade Federal de SergipePós-Graduação em FísicaUFSBRFísicaLuminescênciaCerâmicaCompostos de estrôncioAluminatosSinterizaçãoCNPQ::CIENCIAS EXATAS E DA TERRA::FISICAEstudo da luminescência persistente em cerâmicas de Sr(1-y-z)BxAl(2-x)O4:Euy,Dyz sinterizadas a laserinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFSinstname:Universidade Federal de Sergipe (UFS)instacron:UFSORIGINALYLLA_GRASIELLE_SANTOS_ALVES.pdfapplication/pdf5630993https://ri.ufs.br/jspui/bitstream/riufs/5327/1/YLLA_GRASIELLE_SANTOS_ALVES.pdfec5726990945986d8e995b670b60ead4MD51TEXTYLLA_GRASIELLE_SANTOS_ALVES.pdf.txtYLLA_GRASIELLE_SANTOS_ALVES.pdf.txtExtracted texttext/plain144826https://ri.ufs.br/jspui/bitstream/riufs/5327/2/YLLA_GRASIELLE_SANTOS_ALVES.pdf.txtc815b9c9d86f3caa65e03c4ddc02cc96MD52THUMBNAILYLLA_GRASIELLE_SANTOS_ALVES.pdf.jpgYLLA_GRASIELLE_SANTOS_ALVES.pdf.jpgGenerated Thumbnailimage/jpeg1372https://ri.ufs.br/jspui/bitstream/riufs/5327/3/YLLA_GRASIELLE_SANTOS_ALVES.pdf.jpgeae55811673638dd0bfaa0376a7545b4MD53riufs/53272018-06-13 19:43:04.853oai:ufs.br:riufs/5327Repositório InstitucionalPUBhttps://ri.ufs.br/oai/requestrepositorio@academico.ufs.bropendoar:2018-06-13T22:43:04Repositório Institucional da UFS - Universidade Federal de Sergipe (UFS)false |
dc.title.por.fl_str_mv |
Estudo da luminescência persistente em cerâmicas de Sr(1-y-z)BxAl(2-x)O4:Euy,Dyz sinterizadas a laser |
title |
Estudo da luminescência persistente em cerâmicas de Sr(1-y-z)BxAl(2-x)O4:Euy,Dyz sinterizadas a laser |
spellingShingle |
Estudo da luminescência persistente em cerâmicas de Sr(1-y-z)BxAl(2-x)O4:Euy,Dyz sinterizadas a laser Alves, Ylla Grasielle dos Santos Física Luminescência Cerâmica Compostos de estrôncio Aluminatos Sinterização CNPQ::CIENCIAS EXATAS E DA TERRA::FISICA |
title_short |
Estudo da luminescência persistente em cerâmicas de Sr(1-y-z)BxAl(2-x)O4:Euy,Dyz sinterizadas a laser |
title_full |
Estudo da luminescência persistente em cerâmicas de Sr(1-y-z)BxAl(2-x)O4:Euy,Dyz sinterizadas a laser |
title_fullStr |
Estudo da luminescência persistente em cerâmicas de Sr(1-y-z)BxAl(2-x)O4:Euy,Dyz sinterizadas a laser |
title_full_unstemmed |
Estudo da luminescência persistente em cerâmicas de Sr(1-y-z)BxAl(2-x)O4:Euy,Dyz sinterizadas a laser |
title_sort |
Estudo da luminescência persistente em cerâmicas de Sr(1-y-z)BxAl(2-x)O4:Euy,Dyz sinterizadas a laser |
author |
Alves, Ylla Grasielle dos Santos |
author_facet |
Alves, Ylla Grasielle dos Santos |
author_role |
author |
dc.contributor.author.fl_str_mv |
Alves, Ylla Grasielle dos Santos |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/4548331237405072 |
dc.contributor.advisor1.fl_str_mv |
Silva, Ronaldo Santos da |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/2196554865046647 |
contributor_str_mv |
Silva, Ronaldo Santos da |
dc.subject.por.fl_str_mv |
Física Luminescência Cerâmica Compostos de estrôncio Aluminatos Sinterização |
topic |
Física Luminescência Cerâmica Compostos de estrôncio Aluminatos Sinterização CNPQ::CIENCIAS EXATAS E DA TERRA::FISICA |
dc.subject.cnpq.fl_str_mv |
CNPQ::CIENCIAS EXATAS E DA TERRA::FISICA |
description |
Materials that have light emission for a long period of time even after ceasing the excitation attract curiosity of scientists for a long time. This phenomenon is named persistent luminescence and it has obtained scientific and technological visibility due to its great potential of applications. Among the materials that present this phenomena, it can be cited the strontium aluminate (SrAl2O4) that, when doped or co-doped with rare earth ions, presents naked eye visible persistent luminescence. On the other hand, the boron addition in the SrAl2O4 lattice has been studied due to contribution onto optical and structural properties. Additionally, in order to optimize the physical and chemical properties of the ceramic materials, several synthesis and sintering methods have been used. Among these methods, the laser sintering technique, which a CO2 laser as used as the main heat source, has been presented as an important method for the sintering of ceramic materials. In this work, it was studied the boron influence about the physical properties, particularly on the optical and structural properties, in laser sintered Sr1-y-zBxAl2-xO4:Euy,Dyz (SABED) ceramics. The SABED powders synthesis was developed by the Pechini´s method and analysed by the differential thermal analysis, thermogravimetry and X-Ray diffraction techniques. The SABED ceramics showed good microstructural homogeneity and transparency of up to 50% when sintered at a density power of (3.1 + 0.3) W/mm2 for 30 s. In all the samples were observed a good naked eye visible luminescence intensity for up to 10 minutes, with a characteristic Eu2+ band emission (centered at 512 nm). It is important to note that throughout process was performed at open atmosphere. Finally, the boron addition contributed significantly to improve the microstructure, transparency and naked eye luminescence intensity. |
publishDate |
2015 |
dc.date.issued.fl_str_mv |
2015-02-26 |
dc.date.accessioned.fl_str_mv |
2017-09-26T18:27:26Z |
dc.date.available.fl_str_mv |
2017-09-26T18:27:26Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
ALVES, Ylla Grasielle dos Santos. Estudo da luminescência persistente em cerâmicas de Sr(1-y-z)BxAl(2-x)O4:Euy,Dyz sinterizadas a laser. 2015. 93 f. Dissertação (Mestrado em Física) - Universidade Federal de Sergipe, São Cristóvão, 2015. |
dc.identifier.uri.fl_str_mv |
https://ri.ufs.br/handle/riufs/5327 |
identifier_str_mv |
ALVES, Ylla Grasielle dos Santos. Estudo da luminescência persistente em cerâmicas de Sr(1-y-z)BxAl(2-x)O4:Euy,Dyz sinterizadas a laser. 2015. 93 f. Dissertação (Mestrado em Física) - Universidade Federal de Sergipe, São Cristóvão, 2015. |
url |
https://ri.ufs.br/handle/riufs/5327 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Sergipe |
dc.publisher.program.fl_str_mv |
Pós-Graduação em Física |
dc.publisher.initials.fl_str_mv |
UFS |
dc.publisher.country.fl_str_mv |
BR |
publisher.none.fl_str_mv |
Universidade Federal de Sergipe |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFS instname:Universidade Federal de Sergipe (UFS) instacron:UFS |
instname_str |
Universidade Federal de Sergipe (UFS) |
instacron_str |
UFS |
institution |
UFS |
reponame_str |
Repositório Institucional da UFS |
collection |
Repositório Institucional da UFS |
bitstream.url.fl_str_mv |
https://ri.ufs.br/jspui/bitstream/riufs/5327/1/YLLA_GRASIELLE_SANTOS_ALVES.pdf https://ri.ufs.br/jspui/bitstream/riufs/5327/2/YLLA_GRASIELLE_SANTOS_ALVES.pdf.txt https://ri.ufs.br/jspui/bitstream/riufs/5327/3/YLLA_GRASIELLE_SANTOS_ALVES.pdf.jpg |
bitstream.checksum.fl_str_mv |
ec5726990945986d8e995b670b60ead4 c815b9c9d86f3caa65e03c4ddc02cc96 eae55811673638dd0bfaa0376a7545b4 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFS - Universidade Federal de Sergipe (UFS) |
repository.mail.fl_str_mv |
repositorio@academico.ufs.br |
_version_ |
1793351105335263232 |