Modelos de previsão de propriedades para revestimento cerâmico usando planejamento fatorial
Ano de defesa: | 2014 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | |
Tipo de documento: | Tese |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Não Informado pela instituição
|
Programa de Pós-Graduação: |
Pós-Graduação em Ciência e Engenharia de Materiais
|
Departamento: |
Não Informado pela instituição
|
País: |
Não Informado pela instituição
|
Palavras-chave em Português: | |
Palavras-chave em Inglês: | |
Área do conhecimento CNPq: | |
Link de acesso: | https://ri.ufs.br/handle/riufs/3483 |
Resumo: | The search for improved physical and mechanical properties of ceramic tiles is an increasingly urgent need, facing increasing competition from the globalization of the economy. The design of experiments has been used more and more to model, simulate and obtain characteristics of interest in several areas of science. This work aimed at the development of mathematical models for predicting the properties of water absorption, linear shrinkage and flexural strength of the ceramic tiles using the factorial design of experiments. Samples of three clay deposits were collected, whose physical, chemical and mineralogical characterizations, showed that these are clay characteristics used in the industry of ceramic tiles. Then, based on the major variables of ceramic processing that directly influence the final quality of the ceramic tiles( formulation, particle size, pressing and firing conditions), mathematical models were developed for the prediction of properties of water absorption, linear shrinkage and of the flexural strength modulus. Mathematical models obtained for the prediction of absorption and shrinkage were considered satisfactory for they were able to describe the experimental data in the evaluated range and to the desired level of trust. However, the same has not happened to the model for the flexural strength that must be associated to peculiar characteristic of mechanical behavior of ceramic materials. This work has shown that the importance of characterization of experimental errors in a design of experiments and presents a proposal of procedures for the usage of factorial planning of experiments, specially in the modeling of mechanical behavior of ceramic materials. |
id |
UFS-2_3e1a6a85a9db2b7848448f228a1779e3 |
---|---|
oai_identifier_str |
oai:ufs.br:riufs/3483 |
network_acronym_str |
UFS-2 |
network_name_str |
Repositório Institucional da UFS |
repository_id_str |
|
spelling |
Goes, José Resendehttp://lattes.cnpq.br/3104369029830651Barreto, Ledjane Silvahttp://lattes.cnpq.br/53455495913159262017-09-26T12:01:49Z2017-09-26T12:01:49Z2014-08-25https://ri.ufs.br/handle/riufs/3483The search for improved physical and mechanical properties of ceramic tiles is an increasingly urgent need, facing increasing competition from the globalization of the economy. The design of experiments has been used more and more to model, simulate and obtain characteristics of interest in several areas of science. This work aimed at the development of mathematical models for predicting the properties of water absorption, linear shrinkage and flexural strength of the ceramic tiles using the factorial design of experiments. Samples of three clay deposits were collected, whose physical, chemical and mineralogical characterizations, showed that these are clay characteristics used in the industry of ceramic tiles. Then, based on the major variables of ceramic processing that directly influence the final quality of the ceramic tiles( formulation, particle size, pressing and firing conditions), mathematical models were developed for the prediction of properties of water absorption, linear shrinkage and of the flexural strength modulus. Mathematical models obtained for the prediction of absorption and shrinkage were considered satisfactory for they were able to describe the experimental data in the evaluated range and to the desired level of trust. However, the same has not happened to the model for the flexural strength that must be associated to peculiar characteristic of mechanical behavior of ceramic materials. This work has shown that the importance of characterization of experimental errors in a design of experiments and presents a proposal of procedures for the usage of factorial planning of experiments, specially in the modeling of mechanical behavior of ceramic materials.A busca da melhoria de propriedades físicas e mecânicas da cerâmica de revestimento é uma necessidade cada vez mais premente devido, principalmente à globalização da economia. O planejamento de experimentos tem sido cada vez mais utilizado para modelar, simular e obter características de interesses em diversas áreas da ciência. Este trabalho teve como objetivo o desenvolvimento de modelos matemáticos para predição das propriedades de absorção de água, retração linear e resistência à flexão da cerâmica de revestimento usando o planejamento fatorial de experimentos. Foram coletadas amostras de 03 depósitos argilosos, cuja caracterização física, química e mineralógica mostrou que as mesmas são características de argilas utilizadas na indústria da cerâmica de revestimento. Em seguida, com base nas principais variáveis do processamento cerâmico que influenciam diretamente a qualidade final do revestimento cerâmico (formulação, granulometria, prensagem e condições de queima), foram desenvolvidos modelos matemáticos para predição das propriedades de absorção de água, retração linear e do módulo de resistência à flexão. Os modelos matemáticos obtidos para predição da absorção e retração foram considerados satisfatórios, pois foram capazes de descrever os dados experimentais na faixa avaliada e para o nível de confiança desejado. Entretanto o mesmo não ocorreu com o modelo para resistência à flexão, que deve estar associado às características peculiares do comportamento mecânico dos materiais cerâmicos. Este trabalho demonstrou também a importância da caracterização dos erros experimentais em um planejamento de experimentos, e apresenta uma proposta de procedimentos para a utilização do planejamento fatorial de experimentos, especialmente na modelagem do comportamento mecânico de materiais cerâmicos.application/pdfporMateriaisRevestimentosMaterial cerâmicoPropriedades mecânicasPlanejamento experimentalModelos matemáticosArgilaCeramic materialsCoatingsExperimental designMaterialsMathematical modelsCNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICAModelos de previsão de propriedades para revestimento cerâmico usando planejamento fatorialinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisPós-Graduação em Ciência e Engenharia de Materiaisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFSinstname:Universidade Federal de Sergipe (UFS)instacron:UFSTEXTJOSE_REZENDE_GOES.pdf.txtJOSE_REZENDE_GOES.pdf.txtExtracted texttext/plain229090https://ri.ufs.br/jspui/bitstream/riufs/3483/2/JOSE_REZENDE_GOES.pdf.txtdbc74dbc67d84f99f23bc5846c20cbd5MD52THUMBNAILJOSE_REZENDE_GOES.pdf.jpgJOSE_REZENDE_GOES.pdf.jpgGenerated Thumbnailimage/jpeg1296https://ri.ufs.br/jspui/bitstream/riufs/3483/3/JOSE_REZENDE_GOES.pdf.jpgdaf1e8e2c4438f5f1372c08beb2f31a2MD53ORIGINALJOSE_REZENDE_GOES.pdfapplication/pdf3219783https://ri.ufs.br/jspui/bitstream/riufs/3483/1/JOSE_REZENDE_GOES.pdf42a6295fdb1466e6e94d63c95c5facd3MD51riufs/34832019-07-30 18:57:39.295oai:ufs.br:riufs/3483Repositório InstitucionalPUBhttps://ri.ufs.br/oai/requestrepositorio@academico.ufs.bropendoar:2019-07-30T21:57:39Repositório Institucional da UFS - Universidade Federal de Sergipe (UFS)false |
dc.title.por.fl_str_mv |
Modelos de previsão de propriedades para revestimento cerâmico usando planejamento fatorial |
title |
Modelos de previsão de propriedades para revestimento cerâmico usando planejamento fatorial |
spellingShingle |
Modelos de previsão de propriedades para revestimento cerâmico usando planejamento fatorial Goes, José Resende Materiais Revestimentos Material cerâmico Propriedades mecânicas Planejamento experimental Modelos matemáticos Argila Ceramic materials Coatings Experimental design Materials Mathematical models CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
title_short |
Modelos de previsão de propriedades para revestimento cerâmico usando planejamento fatorial |
title_full |
Modelos de previsão de propriedades para revestimento cerâmico usando planejamento fatorial |
title_fullStr |
Modelos de previsão de propriedades para revestimento cerâmico usando planejamento fatorial |
title_full_unstemmed |
Modelos de previsão de propriedades para revestimento cerâmico usando planejamento fatorial |
title_sort |
Modelos de previsão de propriedades para revestimento cerâmico usando planejamento fatorial |
author |
Goes, José Resende |
author_facet |
Goes, José Resende |
author_role |
author |
dc.contributor.author.fl_str_mv |
Goes, José Resende |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/3104369029830651 |
dc.contributor.advisor1.fl_str_mv |
Barreto, Ledjane Silva |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/5345549591315926 |
contributor_str_mv |
Barreto, Ledjane Silva |
dc.subject.por.fl_str_mv |
Materiais Revestimentos Material cerâmico Propriedades mecânicas Planejamento experimental Modelos matemáticos Argila |
topic |
Materiais Revestimentos Material cerâmico Propriedades mecânicas Planejamento experimental Modelos matemáticos Argila Ceramic materials Coatings Experimental design Materials Mathematical models CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
dc.subject.eng.fl_str_mv |
Ceramic materials Coatings Experimental design Materials Mathematical models |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
description |
The search for improved physical and mechanical properties of ceramic tiles is an increasingly urgent need, facing increasing competition from the globalization of the economy. The design of experiments has been used more and more to model, simulate and obtain characteristics of interest in several areas of science. This work aimed at the development of mathematical models for predicting the properties of water absorption, linear shrinkage and flexural strength of the ceramic tiles using the factorial design of experiments. Samples of three clay deposits were collected, whose physical, chemical and mineralogical characterizations, showed that these are clay characteristics used in the industry of ceramic tiles. Then, based on the major variables of ceramic processing that directly influence the final quality of the ceramic tiles( formulation, particle size, pressing and firing conditions), mathematical models were developed for the prediction of properties of water absorption, linear shrinkage and of the flexural strength modulus. Mathematical models obtained for the prediction of absorption and shrinkage were considered satisfactory for they were able to describe the experimental data in the evaluated range and to the desired level of trust. However, the same has not happened to the model for the flexural strength that must be associated to peculiar characteristic of mechanical behavior of ceramic materials. This work has shown that the importance of characterization of experimental errors in a design of experiments and presents a proposal of procedures for the usage of factorial planning of experiments, specially in the modeling of mechanical behavior of ceramic materials. |
publishDate |
2014 |
dc.date.issued.fl_str_mv |
2014-08-25 |
dc.date.accessioned.fl_str_mv |
2017-09-26T12:01:49Z |
dc.date.available.fl_str_mv |
2017-09-26T12:01:49Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://ri.ufs.br/handle/riufs/3483 |
url |
https://ri.ufs.br/handle/riufs/3483 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.program.fl_str_mv |
Pós-Graduação em Ciência e Engenharia de Materiais |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFS instname:Universidade Federal de Sergipe (UFS) instacron:UFS |
instname_str |
Universidade Federal de Sergipe (UFS) |
instacron_str |
UFS |
institution |
UFS |
reponame_str |
Repositório Institucional da UFS |
collection |
Repositório Institucional da UFS |
bitstream.url.fl_str_mv |
https://ri.ufs.br/jspui/bitstream/riufs/3483/2/JOSE_REZENDE_GOES.pdf.txt https://ri.ufs.br/jspui/bitstream/riufs/3483/3/JOSE_REZENDE_GOES.pdf.jpg https://ri.ufs.br/jspui/bitstream/riufs/3483/1/JOSE_REZENDE_GOES.pdf |
bitstream.checksum.fl_str_mv |
dbc74dbc67d84f99f23bc5846c20cbd5 daf1e8e2c4438f5f1372c08beb2f31a2 42a6295fdb1466e6e94d63c95c5facd3 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFS - Universidade Federal de Sergipe (UFS) |
repository.mail.fl_str_mv |
repositorio@academico.ufs.br |
_version_ |
1793351100797026304 |