Caracterização de filmes finos de nanopartículas de prata depositados por sputtering sobre resina epóxi
Ano de defesa: | 2012 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | |
Tipo de documento: | Tese |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Não Informado pela instituição
|
Programa de Pós-Graduação: |
Pós-Graduação em Física
|
Departamento: |
Não Informado pela instituição
|
País: |
Não Informado pela instituição
|
Palavras-chave em Português: | |
Palavras-chave em Inglês: | |
Área do conhecimento CNPq: | |
Link de acesso: | https://ri.ufs.br/handle/riufs/5375 |
Resumo: | In this work silver atoms were deposited by ion sputtering on the surface of two types of diglycidyl ether of bisphenol A (DGEBA) epoxy resin. The films of DGEBA and its precursors were characterized by Raman and infrared spectroscopy to identify the main functional groups and their relationship with the deposited silver atoms. Thermogravimetric (TG) and differential themogravimetric (DTG) analysis, and Raman spectroscopy was performed to study the thermal effects in the resin. Silver thin films of 5, 10, 15 and 20 nm were deposited on the epoxy resin at room temperature. Both the initial film of DGEBA and the subsequent silver thin film were analyzed by Atomic Force Microscopy (AFM) in non-contact mode. Silver thin films were also analyzed by x-ray diffraction (XRD) at room temperature. The AFM results showed the formation of silver crystallites on the surface of DGEBA at very low coverage whereas XRD indicated that most of them had their main axis aligned to the normal of the surface. Increase in the coverage led to an increase in the grain size as indicated by AFM. XRD results however indicated that the crystallite size remained almost constant while the appearance of peaks corresponding to other crystalline orientati ons suggests the coalescence of the original crystallites and an increase in size of the more dense planes, namely [111]. |
id |
UFS-2_c022abcd96e2097a8d312c1cc98bc573 |
---|---|
oai_identifier_str |
oai:ufs.br:riufs/5375 |
network_acronym_str |
UFS-2 |
network_name_str |
Repositório Institucional da UFS |
repository_id_str |
|
spelling |
Andrade, José Elisandro dehttp://lattes.cnpq.br/3264248290660253Macêdo, Marcelo Andradehttp://lattes.cnpq.br/09961720120473162017-09-26T18:27:47Z2017-09-26T18:27:47Z2012-08-08https://ri.ufs.br/handle/riufs/5375In this work silver atoms were deposited by ion sputtering on the surface of two types of diglycidyl ether of bisphenol A (DGEBA) epoxy resin. The films of DGEBA and its precursors were characterized by Raman and infrared spectroscopy to identify the main functional groups and their relationship with the deposited silver atoms. Thermogravimetric (TG) and differential themogravimetric (DTG) analysis, and Raman spectroscopy was performed to study the thermal effects in the resin. Silver thin films of 5, 10, 15 and 20 nm were deposited on the epoxy resin at room temperature. Both the initial film of DGEBA and the subsequent silver thin film were analyzed by Atomic Force Microscopy (AFM) in non-contact mode. Silver thin films were also analyzed by x-ray diffraction (XRD) at room temperature. The AFM results showed the formation of silver crystallites on the surface of DGEBA at very low coverage whereas XRD indicated that most of them had their main axis aligned to the normal of the surface. Increase in the coverage led to an increase in the grain size as indicated by AFM. XRD results however indicated that the crystallite size remained almost constant while the appearance of peaks corresponding to other crystalline orientati ons suggests the coalescence of the original crystallites and an increase in size of the more dense planes, namely [111].Neste trabalho átomos de prata foram depositados por ion sputtering na superfície de dois tipos de resina epóxi diglicidil éter de bisfenol A (DGEBA). Os filmes de DGEBA e seus precursores foram caracterizados por espectroscopia Raman e infravermelha para identificas os principais grupos funcionais e suas relações com os átomos de prata depositados. Análises termogravimétrica (TG), termogravimétrica diferencial (DTG), e espectroscopia Raman foram realizadas para estudar os efeitos térmicos na resina. Filmes finos de prata de 5, 10, 15 e 20 nm foram depositados na resina epóxi a temperatura ambiente. Ambos filmes iniciais de DGEBA e o subsequente filme fino de prata foram analisados por Microscopia de Força Atômica (AFM) no modo de não contato. Os filmes finos de prata também foram analisados por difratometria de raios X (DRX) a temperatura ambiente. Os resultados de AFM mostram a formação de cristalitos de prata sobre a superfície da DGEBA para pequenas espessuras de recobrimento, enquanto DRX indica que a maioria dos cristalitos tem seu eixo principal alinhado normal à superfície. Um aumento na espessura de recobrimento leva a um aumento no tamanho do grão como indicado por AFM. Resultados de DRX porém, mostram que o tamanho de cristalito permaneceu quase constante, enquanto o aparecimento de picos correspondentes a outras orientações cristalinas sugere a coalescência dos cristalitos originais e um aumento no tamanho dos planos mais densos, principalmente [111].application/pdfporNanopartículas - PrataSemicondutoresEspectrometria por raios XResinas epoxiEpoxy resinsSemiconductorsSpectrometry, X-ray emissionCNPQ::CIENCIAS EXATAS E DA TERRA::FISICACaracterização de filmes finos de nanopartículas de prata depositados por sputtering sobre resina epóxiinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisPós-Graduação em Físicainfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFSinstname:Universidade Federal de Sergipe (UFS)instacron:UFSORIGINALJOSE_ELISANDRO_ANDRADE.pdfapplication/pdf4445000https://ri.ufs.br/jspui/bitstream/riufs/5375/1/JOSE_ELISANDRO_ANDRADE.pdfa51f7d8f664001f4a1afd8c9d13071a2MD51TEXTJOSE_ELISANDRO_ANDRADE.pdf.txtJOSE_ELISANDRO_ANDRADE.pdf.txtExtracted texttext/plain144580https://ri.ufs.br/jspui/bitstream/riufs/5375/2/JOSE_ELISANDRO_ANDRADE.pdf.txt91639e349170d6bb610b1b5a7d07f1ebMD52THUMBNAILJOSE_ELISANDRO_ANDRADE.pdf.jpgJOSE_ELISANDRO_ANDRADE.pdf.jpgGenerated Thumbnailimage/jpeg1366https://ri.ufs.br/jspui/bitstream/riufs/5375/3/JOSE_ELISANDRO_ANDRADE.pdf.jpgf3c2bcdf7b25c95242bf0ff77f497385MD53riufs/53752019-07-30 19:19:12.203oai:ufs.br:riufs/5375Repositório InstitucionalPUBhttps://ri.ufs.br/oai/requestrepositorio@academico.ufs.bropendoar:2019-07-30T22:19:12Repositório Institucional da UFS - Universidade Federal de Sergipe (UFS)false |
dc.title.por.fl_str_mv |
Caracterização de filmes finos de nanopartículas de prata depositados por sputtering sobre resina epóxi |
title |
Caracterização de filmes finos de nanopartículas de prata depositados por sputtering sobre resina epóxi |
spellingShingle |
Caracterização de filmes finos de nanopartículas de prata depositados por sputtering sobre resina epóxi Andrade, José Elisandro de Nanopartículas - Prata Semicondutores Espectrometria por raios X Resinas epoxi Epoxy resins Semiconductors Spectrometry, X-ray emission CNPQ::CIENCIAS EXATAS E DA TERRA::FISICA |
title_short |
Caracterização de filmes finos de nanopartículas de prata depositados por sputtering sobre resina epóxi |
title_full |
Caracterização de filmes finos de nanopartículas de prata depositados por sputtering sobre resina epóxi |
title_fullStr |
Caracterização de filmes finos de nanopartículas de prata depositados por sputtering sobre resina epóxi |
title_full_unstemmed |
Caracterização de filmes finos de nanopartículas de prata depositados por sputtering sobre resina epóxi |
title_sort |
Caracterização de filmes finos de nanopartículas de prata depositados por sputtering sobre resina epóxi |
author |
Andrade, José Elisandro de |
author_facet |
Andrade, José Elisandro de |
author_role |
author |
dc.contributor.author.fl_str_mv |
Andrade, José Elisandro de |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/3264248290660253 |
dc.contributor.advisor1.fl_str_mv |
Macêdo, Marcelo Andrade |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/0996172012047316 |
contributor_str_mv |
Macêdo, Marcelo Andrade |
dc.subject.por.fl_str_mv |
Nanopartículas - Prata Semicondutores Espectrometria por raios X Resinas epoxi |
topic |
Nanopartículas - Prata Semicondutores Espectrometria por raios X Resinas epoxi Epoxy resins Semiconductors Spectrometry, X-ray emission CNPQ::CIENCIAS EXATAS E DA TERRA::FISICA |
dc.subject.eng.fl_str_mv |
Epoxy resins Semiconductors Spectrometry, X-ray emission |
dc.subject.cnpq.fl_str_mv |
CNPQ::CIENCIAS EXATAS E DA TERRA::FISICA |
description |
In this work silver atoms were deposited by ion sputtering on the surface of two types of diglycidyl ether of bisphenol A (DGEBA) epoxy resin. The films of DGEBA and its precursors were characterized by Raman and infrared spectroscopy to identify the main functional groups and their relationship with the deposited silver atoms. Thermogravimetric (TG) and differential themogravimetric (DTG) analysis, and Raman spectroscopy was performed to study the thermal effects in the resin. Silver thin films of 5, 10, 15 and 20 nm were deposited on the epoxy resin at room temperature. Both the initial film of DGEBA and the subsequent silver thin film were analyzed by Atomic Force Microscopy (AFM) in non-contact mode. Silver thin films were also analyzed by x-ray diffraction (XRD) at room temperature. The AFM results showed the formation of silver crystallites on the surface of DGEBA at very low coverage whereas XRD indicated that most of them had their main axis aligned to the normal of the surface. Increase in the coverage led to an increase in the grain size as indicated by AFM. XRD results however indicated that the crystallite size remained almost constant while the appearance of peaks corresponding to other crystalline orientati ons suggests the coalescence of the original crystallites and an increase in size of the more dense planes, namely [111]. |
publishDate |
2012 |
dc.date.issued.fl_str_mv |
2012-08-08 |
dc.date.accessioned.fl_str_mv |
2017-09-26T18:27:47Z |
dc.date.available.fl_str_mv |
2017-09-26T18:27:47Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://ri.ufs.br/handle/riufs/5375 |
url |
https://ri.ufs.br/handle/riufs/5375 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.program.fl_str_mv |
Pós-Graduação em Física |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFS instname:Universidade Federal de Sergipe (UFS) instacron:UFS |
instname_str |
Universidade Federal de Sergipe (UFS) |
instacron_str |
UFS |
institution |
UFS |
reponame_str |
Repositório Institucional da UFS |
collection |
Repositório Institucional da UFS |
bitstream.url.fl_str_mv |
https://ri.ufs.br/jspui/bitstream/riufs/5375/1/JOSE_ELISANDRO_ANDRADE.pdf https://ri.ufs.br/jspui/bitstream/riufs/5375/2/JOSE_ELISANDRO_ANDRADE.pdf.txt https://ri.ufs.br/jspui/bitstream/riufs/5375/3/JOSE_ELISANDRO_ANDRADE.pdf.jpg |
bitstream.checksum.fl_str_mv |
a51f7d8f664001f4a1afd8c9d13071a2 91639e349170d6bb610b1b5a7d07f1eb f3c2bcdf7b25c95242bf0ff77f497385 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFS - Universidade Federal de Sergipe (UFS) |
repository.mail.fl_str_mv |
repositorio@academico.ufs.br |
_version_ |
1793351131719532544 |