Otimização da estrutura e das propriedades luminescentes de materiais híbridos Eu3+:siloxano– polimetacrilato a serem aplicados em fotônica
Ano de defesa: | 2019 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | |
Tipo de documento: | Tese |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Não Informado pela instituição
|
Programa de Pós-Graduação: |
Pós-Graduação em Química
|
Departamento: |
Não Informado pela instituição
|
País: |
Não Informado pela instituição
|
Palavras-chave em Português: | |
Palavras-chave em Inglês: | |
Área do conhecimento CNPq: | |
Link de acesso: | http://ri.ufs.br/jspui/handle/riufs/11967 |
Resumo: | In this thesis, the influences of experimental parameters on the structure and the luminescent properties of Eu3+:siloxane-polymethacrylate hybrid materials were analyzed. These materials were synthesized by combination of sol-gel process with radical polymerization and doped with hexahydrated europium(III) chloride. The organic phase composition, the dopant amount in the hybrid, the polymeric content and the inorganic phase proportion were tuned and, as result, a significant enhancement of the luminescence of the hybrid was achieved. In the first step of the work, the sample with poly(methyl methacrylate) in the organic phase was more suitable for Eu3+ emission, owing to: the lower interaction of the dopant ions with luminescence quenching groups, the larger radiative emission rate and the higher quantum efficiency. The analysis of Eu3+ coordination in the hybrids demonstrated the preferential occupation of sites in which there are interactions with carbonyls of polymeric chains, however, europium(III) clusters are formed when the host coordination ability is overcomed. These clusters are deleterious to luminescent processes because they favor the ion–ion energy transfer by non-radiative mechanisms, which resulted in decreases of lifetimes, radiative emission rates and quantum efficiencies of Eu3+ emission. In turn, the increase in the polymer/silica proportion promoted the more efficient dispersion of Eu3+ ions in the hosts and modified the chemical environment by the presence of more carbonyl groups at Eu3+ coordination sphere in hybrids with higher polymeric contents. These changes modified the profiles of emission decay curves, raised the radiative emission rate and increased the quantum efficiency of the hybrids with higher polymer content. In the last step of this work, the results indicated that the moderate proportion of inorganic structures in the composition of the samples is not deleterious to the emission processes, which occurs only when this parameter is very high. In short, the structure and the emission properties of Eu3+:siloxane-polymethacrylate hybrids were optimized by tuning the experimental parameters, achieving a huge quantum efficiency increase from 9,7 % in PHEMA hybrid to 35,2 % in TEOS0. |
id |
UFS-2_c50c4890c7097508a516c760c19d3a22 |
---|---|
oai_identifier_str |
oai:ufs.br:riufs/11967 |
network_acronym_str |
UFS-2 |
network_name_str |
Repositório Institucional da UFS |
repository_id_str |
|
spelling |
Jesus, Filipe Augusto deSarmento, Victor Hugo VitorinoCaiut, José Maurício Almeida2019-10-01T12:20:32Z2019-10-01T12:20:32Z2019-08-30JESUS, Filipe Augusto de. Otimização da estrutura e das propriedades luminescentes de materiais híbridos Eu3+:siloxano– polimetacrilato a serem aplicados em fotônica. 2019. 185 f. Tese (Doutorado em Química) - Universidade Federal de Sergipe, São Cristóvão, SE, 2019.http://ri.ufs.br/jspui/handle/riufs/11967In this thesis, the influences of experimental parameters on the structure and the luminescent properties of Eu3+:siloxane-polymethacrylate hybrid materials were analyzed. These materials were synthesized by combination of sol-gel process with radical polymerization and doped with hexahydrated europium(III) chloride. The organic phase composition, the dopant amount in the hybrid, the polymeric content and the inorganic phase proportion were tuned and, as result, a significant enhancement of the luminescence of the hybrid was achieved. In the first step of the work, the sample with poly(methyl methacrylate) in the organic phase was more suitable for Eu3+ emission, owing to: the lower interaction of the dopant ions with luminescence quenching groups, the larger radiative emission rate and the higher quantum efficiency. The analysis of Eu3+ coordination in the hybrids demonstrated the preferential occupation of sites in which there are interactions with carbonyls of polymeric chains, however, europium(III) clusters are formed when the host coordination ability is overcomed. These clusters are deleterious to luminescent processes because they favor the ion–ion energy transfer by non-radiative mechanisms, which resulted in decreases of lifetimes, radiative emission rates and quantum efficiencies of Eu3+ emission. In turn, the increase in the polymer/silica proportion promoted the more efficient dispersion of Eu3+ ions in the hosts and modified the chemical environment by the presence of more carbonyl groups at Eu3+ coordination sphere in hybrids with higher polymeric contents. These changes modified the profiles of emission decay curves, raised the radiative emission rate and increased the quantum efficiency of the hybrids with higher polymer content. In the last step of this work, the results indicated that the moderate proportion of inorganic structures in the composition of the samples is not deleterious to the emission processes, which occurs only when this parameter is very high. In short, the structure and the emission properties of Eu3+:siloxane-polymethacrylate hybrids were optimized by tuning the experimental parameters, achieving a huge quantum efficiency increase from 9,7 % in PHEMA hybrid to 35,2 % in TEOS0.Nesta tese, analisou-se as influências de parâmetros experimentais sobre a estrutura e as propriedades luminescentes de materiais híbridos Eu3+:siloxano–polimetacrilato, os quais foram sintetizados pela combinação do processo sol-gel com a polimerização radicalar e dopados com cloreto de európio(III) hexaidratado. A composição da fase orgânica, a quantidade de dopante no híbrido, o conteúdo polimérico e a proporção da fase inorgânica foram ajustados e, como resultado, obteve-se uma evolução significativa da luminescência dos híbridos. Na primeira etapa do trabalho, a amostra com poli(metacrilato de metila) na fase orgânica demonstrou ser mais adequada à emissão dos íons Eu3+, tendo em vista a menor interação do dopante com grupos supressores de luminescência, a maior taxa de emissão radiativa e a eficiência quântica mais elevada. A análise da coordenação do Eu3+ nos híbridos demonstrou a ocupação preferencial de sítios em que há interações com carbonilas das cadeias poliméricas, entretanto, há formação de clusters de európio(III) quando a capacidade de coordenação da matriz híbrida é superada. Esses clusters são deletérios aos processos luminescentes porque favorecem a transferência de energia íon–íon por mecanismos não-radiativos, o que resultou em reduções nos tempos de vida, na taxa de emissão radiativa e na eficiência quântica da emissão do Eu3+. Por sua vez, o aumento na proporção polímero/sílica promoveu a dispersão mais eficiente dos íons dopante nas matrizes e modificou o ambiente químico pelo maior número de grupos carbonílicos na esfera de coordenação do Eu3+ nos híbridos com maiores conteúdos poliméricos. Essas alterações modificaram os perfis das curvas de decaimento de emissão, aumentaram a taxa de emissão radiativa e elevaram a eficiência quântica dos híbridos com maiores quantidades de polímero. Na última etapa deste trabalho, os resultados indicaram que o crescimento moderado da proporção de estruturas inorgânicas na composição das amostras não é deletério aos processos de emissão, o que ocorre apenas quando o parâmetro em questão é muito elevado. Em suma, a estrutura e as propriedades de emissão de híbridos Eu3+:siloxano-polimetacrilato foram otimizadas a partir do ajuste de parâmetros experimentais, tendo alcançado um aumento na eficiência quântica de 9,7 % no híbrido PHEMA para 35,2 % no TEOS0.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPESSão Cristóvão, SEporQuímicaMateriais híbridosPolímerosSiloxanosLuminescênciaÍonsSiloxano–polimetacrilatoEu3+Otimização de parâmetros experimentaisHybrid materialsSiloxane–polymethacrylateLuminescenceOptimization of experimental parametersCIENCIAS EXATAS E DA TERRA::QUIMICAOtimização da estrutura e das propriedades luminescentes de materiais híbridos Eu3+:siloxano– polimetacrilato a serem aplicados em fotônicaEnhancement of the structure and luminescent properties of Eu3+:siloxane–polymethacrylate hybrid materials to be applied in photonicsinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisPós-Graduação em QuímicaUFSreponame:Repositório Institucional da UFSinstname:Universidade Federal de Sergipe (UFS)instacron:UFSinfo:eu-repo/semantics/openAccessORIGINALFILIPE_AUGUSTO_JESUS.pdfFILIPE_AUGUSTO_JESUS.pdfapplication/pdf30007235https://ri.ufs.br/jspui/bitstream/riufs/11967/2/FILIPE_AUGUSTO_JESUS.pdf00a8e07f42992383dd39727928cf3702MD52LICENSElicense.txtlicense.txttext/plain; charset=utf-81475https://ri.ufs.br/jspui/bitstream/riufs/11967/1/license.txt098cbbf65c2c15e1fb2e49c5d306a44cMD51TEXTFILIPE_AUGUSTO_JESUS.pdf.txtFILIPE_AUGUSTO_JESUS.pdf.txtExtracted texttext/plain367877https://ri.ufs.br/jspui/bitstream/riufs/11967/3/FILIPE_AUGUSTO_JESUS.pdf.txt6054ef47d6dc9ad01c78b8a6017af6e2MD53THUMBNAILFILIPE_AUGUSTO_JESUS.pdf.jpgFILIPE_AUGUSTO_JESUS.pdf.jpgGenerated Thumbnailimage/jpeg1634https://ri.ufs.br/jspui/bitstream/riufs/11967/4/FILIPE_AUGUSTO_JESUS.pdf.jpged1b66ce44e7059d19d07948e2616181MD54riufs/119672019-10-01 09:21:31.681oai:ufs.br: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Repositório InstitucionalPUBhttps://ri.ufs.br/oai/requestrepositorio@academico.ufs.bropendoar:2019-10-01T12:21:31Repositório Institucional da UFS - Universidade Federal de Sergipe (UFS)false |
dc.title.pt_BR.fl_str_mv |
Otimização da estrutura e das propriedades luminescentes de materiais híbridos Eu3+:siloxano– polimetacrilato a serem aplicados em fotônica |
dc.title.alternative.eng.fl_str_mv |
Enhancement of the structure and luminescent properties of Eu3+:siloxane–polymethacrylate hybrid materials to be applied in photonics |
title |
Otimização da estrutura e das propriedades luminescentes de materiais híbridos Eu3+:siloxano– polimetacrilato a serem aplicados em fotônica |
spellingShingle |
Otimização da estrutura e das propriedades luminescentes de materiais híbridos Eu3+:siloxano– polimetacrilato a serem aplicados em fotônica Jesus, Filipe Augusto de Química Materiais híbridos Polímeros Siloxanos Luminescência Íons Siloxano–polimetacrilato Eu3+ Otimização de parâmetros experimentais Hybrid materials Siloxane–polymethacrylate Luminescence Optimization of experimental parameters CIENCIAS EXATAS E DA TERRA::QUIMICA |
title_short |
Otimização da estrutura e das propriedades luminescentes de materiais híbridos Eu3+:siloxano– polimetacrilato a serem aplicados em fotônica |
title_full |
Otimização da estrutura e das propriedades luminescentes de materiais híbridos Eu3+:siloxano– polimetacrilato a serem aplicados em fotônica |
title_fullStr |
Otimização da estrutura e das propriedades luminescentes de materiais híbridos Eu3+:siloxano– polimetacrilato a serem aplicados em fotônica |
title_full_unstemmed |
Otimização da estrutura e das propriedades luminescentes de materiais híbridos Eu3+:siloxano– polimetacrilato a serem aplicados em fotônica |
title_sort |
Otimização da estrutura e das propriedades luminescentes de materiais híbridos Eu3+:siloxano– polimetacrilato a serem aplicados em fotônica |
author |
Jesus, Filipe Augusto de |
author_facet |
Jesus, Filipe Augusto de |
author_role |
author |
dc.contributor.author.fl_str_mv |
Jesus, Filipe Augusto de |
dc.contributor.advisor1.fl_str_mv |
Sarmento, Victor Hugo Vitorino |
dc.contributor.advisor-co1.fl_str_mv |
Caiut, José Maurício Almeida |
contributor_str_mv |
Sarmento, Victor Hugo Vitorino Caiut, José Maurício Almeida |
dc.subject.por.fl_str_mv |
Química Materiais híbridos Polímeros Siloxanos Luminescência Íons Siloxano–polimetacrilato Eu3+ Otimização de parâmetros experimentais |
topic |
Química Materiais híbridos Polímeros Siloxanos Luminescência Íons Siloxano–polimetacrilato Eu3+ Otimização de parâmetros experimentais Hybrid materials Siloxane–polymethacrylate Luminescence Optimization of experimental parameters CIENCIAS EXATAS E DA TERRA::QUIMICA |
dc.subject.eng.fl_str_mv |
Hybrid materials Siloxane–polymethacrylate Luminescence Optimization of experimental parameters |
dc.subject.cnpq.fl_str_mv |
CIENCIAS EXATAS E DA TERRA::QUIMICA |
description |
In this thesis, the influences of experimental parameters on the structure and the luminescent properties of Eu3+:siloxane-polymethacrylate hybrid materials were analyzed. These materials were synthesized by combination of sol-gel process with radical polymerization and doped with hexahydrated europium(III) chloride. The organic phase composition, the dopant amount in the hybrid, the polymeric content and the inorganic phase proportion were tuned and, as result, a significant enhancement of the luminescence of the hybrid was achieved. In the first step of the work, the sample with poly(methyl methacrylate) in the organic phase was more suitable for Eu3+ emission, owing to: the lower interaction of the dopant ions with luminescence quenching groups, the larger radiative emission rate and the higher quantum efficiency. The analysis of Eu3+ coordination in the hybrids demonstrated the preferential occupation of sites in which there are interactions with carbonyls of polymeric chains, however, europium(III) clusters are formed when the host coordination ability is overcomed. These clusters are deleterious to luminescent processes because they favor the ion–ion energy transfer by non-radiative mechanisms, which resulted in decreases of lifetimes, radiative emission rates and quantum efficiencies of Eu3+ emission. In turn, the increase in the polymer/silica proportion promoted the more efficient dispersion of Eu3+ ions in the hosts and modified the chemical environment by the presence of more carbonyl groups at Eu3+ coordination sphere in hybrids with higher polymeric contents. These changes modified the profiles of emission decay curves, raised the radiative emission rate and increased the quantum efficiency of the hybrids with higher polymer content. In the last step of this work, the results indicated that the moderate proportion of inorganic structures in the composition of the samples is not deleterious to the emission processes, which occurs only when this parameter is very high. In short, the structure and the emission properties of Eu3+:siloxane-polymethacrylate hybrids were optimized by tuning the experimental parameters, achieving a huge quantum efficiency increase from 9,7 % in PHEMA hybrid to 35,2 % in TEOS0. |
publishDate |
2019 |
dc.date.accessioned.fl_str_mv |
2019-10-01T12:20:32Z |
dc.date.available.fl_str_mv |
2019-10-01T12:20:32Z |
dc.date.issued.fl_str_mv |
2019-08-30 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
JESUS, Filipe Augusto de. Otimização da estrutura e das propriedades luminescentes de materiais híbridos Eu3+:siloxano– polimetacrilato a serem aplicados em fotônica. 2019. 185 f. Tese (Doutorado em Química) - Universidade Federal de Sergipe, São Cristóvão, SE, 2019. |
dc.identifier.uri.fl_str_mv |
http://ri.ufs.br/jspui/handle/riufs/11967 |
identifier_str_mv |
JESUS, Filipe Augusto de. Otimização da estrutura e das propriedades luminescentes de materiais híbridos Eu3+:siloxano– polimetacrilato a serem aplicados em fotônica. 2019. 185 f. Tese (Doutorado em Química) - Universidade Federal de Sergipe, São Cristóvão, SE, 2019. |
url |
http://ri.ufs.br/jspui/handle/riufs/11967 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.publisher.program.fl_str_mv |
Pós-Graduação em Química |
dc.publisher.initials.fl_str_mv |
UFS |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFS instname:Universidade Federal de Sergipe (UFS) instacron:UFS |
instname_str |
Universidade Federal de Sergipe (UFS) |
instacron_str |
UFS |
institution |
UFS |
reponame_str |
Repositório Institucional da UFS |
collection |
Repositório Institucional da UFS |
bitstream.url.fl_str_mv |
https://ri.ufs.br/jspui/bitstream/riufs/11967/2/FILIPE_AUGUSTO_JESUS.pdf https://ri.ufs.br/jspui/bitstream/riufs/11967/1/license.txt https://ri.ufs.br/jspui/bitstream/riufs/11967/3/FILIPE_AUGUSTO_JESUS.pdf.txt https://ri.ufs.br/jspui/bitstream/riufs/11967/4/FILIPE_AUGUSTO_JESUS.pdf.jpg |
bitstream.checksum.fl_str_mv |
00a8e07f42992383dd39727928cf3702 098cbbf65c2c15e1fb2e49c5d306a44c 6054ef47d6dc9ad01c78b8a6017af6e2 ed1b66ce44e7059d19d07948e2616181 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFS - Universidade Federal de Sergipe (UFS) |
repository.mail.fl_str_mv |
repositorio@academico.ufs.br |
_version_ |
1793351080288976896 |