Avaliação da influência de um agente modificador de superfície de partículas na estruturação de compósitos bioativos
Ano de defesa: | 2016 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | |
Tipo de documento: | Tese |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal de Sergipe
|
Programa de Pós-Graduação: |
Pós-Graduação em Ciência e Engenharia de Materiais
|
Departamento: |
Não Informado pela instituição
|
País: |
Brasil
|
Palavras-chave em Português: | |
Palavras-chave em Inglês: | |
Área do conhecimento CNPq: | |
Link de acesso: | https://ri.ufs.br/handle/riufs/3472 |
Resumo: | Treating lesions in living tissues has become a health issue due to the late natural healing process, limited acceptance and compatibility with grafts. The development of biomaterials emerges as a new strategy. Thus, this study aimed to obtain bioactive porous composite, of different compositions and the evaluation of the influence of the composition on the physical, chemical, structural, morphological and biological properties for possible application in tissue engineering. The project started with the preparation and characterization of hydroxyapatite nanoparticles (HAP), via a wet precipitation route, and the modification of their surface by stearic acid (SA) (reflux). The presence of SA in the surface of HAP promoted significant changes in their general characteristics, especially in their morphology, size and thermal stability (TG/DTG). For the formation of composites, chitosan with different degrees of purity were chosen. To the homogeneous dispersion of ceramic in the polymer dispersion has required the incorporation of a viscosity agent, hydroxyethyl cellulose (HEC), which prevented the settling of HAP particles. Thus, six groups were evaluated and characterized by techniques that allowed to infer basic information about the degree of swelling, porosity, surface morphology, thermal stability, crystallinity and chemical environment (chemical groups). The cellular viability evaluated under the composites allows suggesting the biocompability of these. The study of the structural organization during lyophilization, using the small angle X-ray scattering, and evaluation of internal morphological structure of the composites under the influence of the composition was performed using X-ray Tomography. These analyzes showed that the presence of SA in the surface composition of nanoparticles inserted in composites influenced the agglomeration and deposition of HAP nanometric in the polymer structure, determining the structural characteristics of these composites. |
id |
UFS-2_d74462337bfd2d2185427cd033b21777 |
---|---|
oai_identifier_str |
oai:ufs.br:riufs/3472 |
network_acronym_str |
UFS-2 |
network_name_str |
Repositório Institucional da UFS |
repository_id_str |
|
spelling |
Gonsalves, Joyce Kelly Marinheiro da CunhaValério, Mário Ernesto GiroldoNunes, Rogéria de Souzahttp://lattes.cnpq.br/15066146066953222017-09-26T11:53:11Z2017-09-26T11:53:11Z2016-12-19GONSALVES, Joyce Kelly Marinheiro da Cunha. Avaliação da influência de um agente modificador de superfície de partículas na estruturação de compósitos bioativos. 2016. 158 f. Tese (Pós-Graduação em Ciência e Engenharia de Materiais) - Universidade Federal de Sergipe, São Cristóvão, SE, 2016.https://ri.ufs.br/handle/riufs/3472Treating lesions in living tissues has become a health issue due to the late natural healing process, limited acceptance and compatibility with grafts. The development of biomaterials emerges as a new strategy. Thus, this study aimed to obtain bioactive porous composite, of different compositions and the evaluation of the influence of the composition on the physical, chemical, structural, morphological and biological properties for possible application in tissue engineering. The project started with the preparation and characterization of hydroxyapatite nanoparticles (HAP), via a wet precipitation route, and the modification of their surface by stearic acid (SA) (reflux). The presence of SA in the surface of HAP promoted significant changes in their general characteristics, especially in their morphology, size and thermal stability (TG/DTG). For the formation of composites, chitosan with different degrees of purity were chosen. To the homogeneous dispersion of ceramic in the polymer dispersion has required the incorporation of a viscosity agent, hydroxyethyl cellulose (HEC), which prevented the settling of HAP particles. Thus, six groups were evaluated and characterized by techniques that allowed to infer basic information about the degree of swelling, porosity, surface morphology, thermal stability, crystallinity and chemical environment (chemical groups). The cellular viability evaluated under the composites allows suggesting the biocompability of these. The study of the structural organization during lyophilization, using the small angle X-ray scattering, and evaluation of internal morphological structure of the composites under the influence of the composition was performed using X-ray Tomography. These analyzes showed that the presence of SA in the surface composition of nanoparticles inserted in composites influenced the agglomeration and deposition of HAP nanometric in the polymer structure, determining the structural characteristics of these composites.Tratar lesões em tecidos vivos tornou-se uma problemática em saúde devido ao tardio processo de cicatrização natural, a uma limitada aceitação e compatibilidade com enxertos. O desenvolvimento de biomateriais surge como nova estratégia. Deste modo, este trabalho teve como objetivo principal a obtenção de compósitos bioativos porosos e avaliar a influência da composição nas características físicas, químicas, estruturais, morfológicas e biológicas para uma possível aplicação em tecido ósseo. A proposta iniciou-se com a obtenção e caracterização de nanopartículas de hidroxiapatita (HAP) (precipitação por via úmida) e com a modificação de sua superfície pelo ácido esteárico (AE) (refluxo). A presença do AE sob a superfície da HAP promoveu alterações significativas em suas características gerais, principalmente em suas morfologias, tamanhos e estabilidade térmica (TG/DTG). Para os compósitos, quitosanas com diferentes graus de pureza foram escolhidas. Com o intuito de homogeneizar a cerâmica sob a dispersão polimérica, fez necessária a incorporação de um agente de viscosidade, o hidroxietilcelulose (HEC). Sendo assim, seis grupos de compósitos foram avaliados e caracterizados por técnicas que permitiram inferir informações básicas a respeito do grau de intumescimento, da porosidade, da morfologia de superfície, da estabilidade térmica, da cristalinidade e do ambiente químico. A viabilidade celular avaliada sob os compósitos permitiu sugerir a biocompatibilidade destes. O estudo da organização estrutural durante a liofilização, utilizando-se o espalhamento de raios X a baixos ângulos, e a avaliação da estrutura morfológica interna dos compósitos sob influência da composição foi realizada através da tomografia de raios X. Tais análises permitiram inferir que a presença do AE na composição de superfície das nanopartículas inseridas nos compósitos influenciou na aglomeração e deposição das nanocargas de HAP sob a estrutura polimérica, determinando as características estruturais destes compósitos.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPESapplication/pdfporUniversidade Federal de SergipePós-Graduação em Ciência e Engenharia de MateriaisUFSBrasilEngenharia de materiaisMateriais biomédicosHidroxiapatitaNanocompósitosArcabouçosModificador de superfícieCompósitos bioativosScaffoldsSurface modifierHydroxyapatiteBioactive compositesENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICAAvaliação da influência de um agente modificador de superfície de partículas na estruturação de compósitos bioativosinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFSinstname:Universidade Federal de Sergipe (UFS)instacron:UFSTEXTJOYCE_KELLY_MARINHEIRO_C_GONSALVES.pdf.txtJOYCE_KELLY_MARINHEIRO_C_GONSALVES.pdf.txtExtracted texttext/plain247273https://ri.ufs.br/jspui/bitstream/riufs/3472/2/JOYCE_KELLY_MARINHEIRO_C_GONSALVES.pdf.txt2ca36d71a69941266d10458be8f0ba6cMD52THUMBNAILJOYCE_KELLY_MARINHEIRO_C_GONSALVES.pdf.jpgJOYCE_KELLY_MARINHEIRO_C_GONSALVES.pdf.jpgGenerated Thumbnailimage/jpeg1370https://ri.ufs.br/jspui/bitstream/riufs/3472/3/JOYCE_KELLY_MARINHEIRO_C_GONSALVES.pdf.jpge19363fa40a69f56de9aca31fe79c7ebMD53ORIGINALJOYCE_KELLY_MARINHEIRO_C_GONSALVES.pdfapplication/pdf4259986https://ri.ufs.br/jspui/bitstream/riufs/3472/1/JOYCE_KELLY_MARINHEIRO_C_GONSALVES.pdfbbc5355c209fd54050912421f38c992dMD51riufs/34722017-11-27 21:24:07.183oai:ufs.br:riufs/3472Repositório InstitucionalPUBhttps://ri.ufs.br/oai/requestrepositorio@academico.ufs.bropendoar:2017-11-28T00:24:07Repositório Institucional da UFS - Universidade Federal de Sergipe (UFS)false |
dc.title.por.fl_str_mv |
Avaliação da influência de um agente modificador de superfície de partículas na estruturação de compósitos bioativos |
title |
Avaliação da influência de um agente modificador de superfície de partículas na estruturação de compósitos bioativos |
spellingShingle |
Avaliação da influência de um agente modificador de superfície de partículas na estruturação de compósitos bioativos Gonsalves, Joyce Kelly Marinheiro da Cunha Engenharia de materiais Materiais biomédicos Hidroxiapatita Nanocompósitos Arcabouços Modificador de superfície Compósitos bioativos Scaffolds Surface modifier Hydroxyapatite Bioactive composites ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
title_short |
Avaliação da influência de um agente modificador de superfície de partículas na estruturação de compósitos bioativos |
title_full |
Avaliação da influência de um agente modificador de superfície de partículas na estruturação de compósitos bioativos |
title_fullStr |
Avaliação da influência de um agente modificador de superfície de partículas na estruturação de compósitos bioativos |
title_full_unstemmed |
Avaliação da influência de um agente modificador de superfície de partículas na estruturação de compósitos bioativos |
title_sort |
Avaliação da influência de um agente modificador de superfície de partículas na estruturação de compósitos bioativos |
author |
Gonsalves, Joyce Kelly Marinheiro da Cunha |
author_facet |
Gonsalves, Joyce Kelly Marinheiro da Cunha |
author_role |
author |
dc.contributor.author.fl_str_mv |
Gonsalves, Joyce Kelly Marinheiro da Cunha |
dc.contributor.advisor1.fl_str_mv |
Valério, Mário Ernesto Giroldo |
dc.contributor.advisor-co1.fl_str_mv |
Nunes, Rogéria de Souza |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/1506614606695322 |
contributor_str_mv |
Valério, Mário Ernesto Giroldo Nunes, Rogéria de Souza |
dc.subject.por.fl_str_mv |
Engenharia de materiais Materiais biomédicos Hidroxiapatita Nanocompósitos Arcabouços Modificador de superfície Compósitos bioativos |
topic |
Engenharia de materiais Materiais biomédicos Hidroxiapatita Nanocompósitos Arcabouços Modificador de superfície Compósitos bioativos Scaffolds Surface modifier Hydroxyapatite Bioactive composites ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
dc.subject.eng.fl_str_mv |
Scaffolds Surface modifier Hydroxyapatite Bioactive composites |
dc.subject.cnpq.fl_str_mv |
ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
description |
Treating lesions in living tissues has become a health issue due to the late natural healing process, limited acceptance and compatibility with grafts. The development of biomaterials emerges as a new strategy. Thus, this study aimed to obtain bioactive porous composite, of different compositions and the evaluation of the influence of the composition on the physical, chemical, structural, morphological and biological properties for possible application in tissue engineering. The project started with the preparation and characterization of hydroxyapatite nanoparticles (HAP), via a wet precipitation route, and the modification of their surface by stearic acid (SA) (reflux). The presence of SA in the surface of HAP promoted significant changes in their general characteristics, especially in their morphology, size and thermal stability (TG/DTG). For the formation of composites, chitosan with different degrees of purity were chosen. To the homogeneous dispersion of ceramic in the polymer dispersion has required the incorporation of a viscosity agent, hydroxyethyl cellulose (HEC), which prevented the settling of HAP particles. Thus, six groups were evaluated and characterized by techniques that allowed to infer basic information about the degree of swelling, porosity, surface morphology, thermal stability, crystallinity and chemical environment (chemical groups). The cellular viability evaluated under the composites allows suggesting the biocompability of these. The study of the structural organization during lyophilization, using the small angle X-ray scattering, and evaluation of internal morphological structure of the composites under the influence of the composition was performed using X-ray Tomography. These analyzes showed that the presence of SA in the surface composition of nanoparticles inserted in composites influenced the agglomeration and deposition of HAP nanometric in the polymer structure, determining the structural characteristics of these composites. |
publishDate |
2016 |
dc.date.issued.fl_str_mv |
2016-12-19 |
dc.date.accessioned.fl_str_mv |
2017-09-26T11:53:11Z |
dc.date.available.fl_str_mv |
2017-09-26T11:53:11Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
GONSALVES, Joyce Kelly Marinheiro da Cunha. Avaliação da influência de um agente modificador de superfície de partículas na estruturação de compósitos bioativos. 2016. 158 f. Tese (Pós-Graduação em Ciência e Engenharia de Materiais) - Universidade Federal de Sergipe, São Cristóvão, SE, 2016. |
dc.identifier.uri.fl_str_mv |
https://ri.ufs.br/handle/riufs/3472 |
identifier_str_mv |
GONSALVES, Joyce Kelly Marinheiro da Cunha. Avaliação da influência de um agente modificador de superfície de partículas na estruturação de compósitos bioativos. 2016. 158 f. Tese (Pós-Graduação em Ciência e Engenharia de Materiais) - Universidade Federal de Sergipe, São Cristóvão, SE, 2016. |
url |
https://ri.ufs.br/handle/riufs/3472 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Sergipe |
dc.publisher.program.fl_str_mv |
Pós-Graduação em Ciência e Engenharia de Materiais |
dc.publisher.initials.fl_str_mv |
UFS |
dc.publisher.country.fl_str_mv |
Brasil |
publisher.none.fl_str_mv |
Universidade Federal de Sergipe |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFS instname:Universidade Federal de Sergipe (UFS) instacron:UFS |
instname_str |
Universidade Federal de Sergipe (UFS) |
instacron_str |
UFS |
institution |
UFS |
reponame_str |
Repositório Institucional da UFS |
collection |
Repositório Institucional da UFS |
bitstream.url.fl_str_mv |
https://ri.ufs.br/jspui/bitstream/riufs/3472/2/JOYCE_KELLY_MARINHEIRO_C_GONSALVES.pdf.txt https://ri.ufs.br/jspui/bitstream/riufs/3472/3/JOYCE_KELLY_MARINHEIRO_C_GONSALVES.pdf.jpg https://ri.ufs.br/jspui/bitstream/riufs/3472/1/JOYCE_KELLY_MARINHEIRO_C_GONSALVES.pdf |
bitstream.checksum.fl_str_mv |
2ca36d71a69941266d10458be8f0ba6c e19363fa40a69f56de9aca31fe79c7eb bbc5355c209fd54050912421f38c992d |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFS - Universidade Federal de Sergipe (UFS) |
repository.mail.fl_str_mv |
repositorio@academico.ufs.br |
_version_ |
1793351073799340032 |