Preparação do compósito ferrita de níquel/nanotubos de carbono por micro-ondas para uso na reação de foto-fenton
Ano de defesa: | 2015 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | , |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal de Santa Maria
|
Programa de Pós-Graduação: |
Programa de Pós-Graduação em Engenharia de Processos
|
Departamento: |
Engenharia de Processos
|
País: |
BR
|
Palavras-chave em Português: | |
Palavras-chave em Inglês: | |
Área do conhecimento CNPq: | |
Link de acesso: | http://repositorio.ufsm.br/handle/1/7999 |
Resumo: | In this study, the synthesis of the nickel ferrite composite/carbon nanotubes was accomplished through two different routes: conventional solvothermal method and solvothermal method assisted by microwave. The influence of the synthesis route into material's physical properties was investigated. Furthermore, the nickel ferrite, without carbon nanotubes presence, was synthesized by the solvothermal method assisted by microwave. The obtained materials were characterized by X-Ray Diffraction (XRD), Fourier Transform Infrared spectroscopy (FTIR), surface area and adsorption-desorption measurements by the Brunauer-Emmett-Teller method (BET), Differential Thermal Analysis (TGA) and Raman spectroscopy The materials produced were used as photo-Fenton catalysts for heterogeneous reactions, aiming the degradation of an organic dye (Acid Red 27) under the irradiation of visible light. The assays were performed in order to analyze the different process variables, citing pH, dye concentration, the mass of the catalyst and the hydrogen peroxide aliquot. The reactions rates constants were determined only for the material obtained through the route assisted by microwave, since the two composites present similar physical properties, and therefore we chose this composite , once the synthesis is performed in less time (30 minutes versus 20 hours the conventional method). The photo-Fenton reaction assays indicate that this composite has effective performance into degradation of organic pollutants in solution, with total color removal in 60 minutes of reaction for Acid Red dye concentration of 50 mg.L-1. |
id |
UFSM_91332ba953c80c693567d585352da4dd |
---|---|
oai_identifier_str |
oai:repositorio.ufsm.br:1/7999 |
network_acronym_str |
UFSM |
network_name_str |
Biblioteca Digital de Teses e Dissertações do UFSM |
repository_id_str |
|
spelling |
2016-04-012016-04-012015-08-21RIGO, Caroline. PREPARAÇÃO DO COMPÓSITO FERRITA DE NÍQUEL/NANOTUBOS DE CARBONO POR MICRO-ONDAS PARA USO NA REAÇÃO DE FOTO-FENTON. 2015. 57 f. Dissertação (Mestrado em Engenharia) - Universidade Federal de Santa Maria, Santa Maria, 2015.http://repositorio.ufsm.br/handle/1/7999In this study, the synthesis of the nickel ferrite composite/carbon nanotubes was accomplished through two different routes: conventional solvothermal method and solvothermal method assisted by microwave. The influence of the synthesis route into material's physical properties was investigated. Furthermore, the nickel ferrite, without carbon nanotubes presence, was synthesized by the solvothermal method assisted by microwave. The obtained materials were characterized by X-Ray Diffraction (XRD), Fourier Transform Infrared spectroscopy (FTIR), surface area and adsorption-desorption measurements by the Brunauer-Emmett-Teller method (BET), Differential Thermal Analysis (TGA) and Raman spectroscopy The materials produced were used as photo-Fenton catalysts for heterogeneous reactions, aiming the degradation of an organic dye (Acid Red 27) under the irradiation of visible light. The assays were performed in order to analyze the different process variables, citing pH, dye concentration, the mass of the catalyst and the hydrogen peroxide aliquot. The reactions rates constants were determined only for the material obtained through the route assisted by microwave, since the two composites present similar physical properties, and therefore we chose this composite , once the synthesis is performed in less time (30 minutes versus 20 hours the conventional method). The photo-Fenton reaction assays indicate that this composite has effective performance into degradation of organic pollutants in solution, with total color removal in 60 minutes of reaction for Acid Red dye concentration of 50 mg.L-1.Neste trabalho foi realizada a síntese do compósito de ferrita de níquel/ nanotubos de carbono por duas rotas distintas: método solvotérmico convencional e método solvotérmico assistido por micro-ondas. A influência da rota de síntese sobre as propriedades físicas do material foi investigada. Além disso, ferrita de níquel sem presença de nanotubos de carbono foi sintetizada pelo método solvotérmico assistido por micro-ondas. Os materiais obtidos foram caracterizados por difração de raios-X (DRX), espectroscopia no infravermelho com transformada de Fourier (FTIR), área superficial e medições de adsorção-dessorção pelo método Brunauer-Emmet-Teller (BET), análise térmica diferencial (TGA/DTG) e espectroscopia RAMAN. Os materiais produzidos foram utilizados como catalisadores em reações de foto-Fenton heterogêneo, visando à degradação de um corante orgânico (Vermelho Ácido 27) sob a irradiação de luz visível. Os ensaios foram realizados de modo a se analisar diferentes variáveis do processo, citando-se pH, concentração de corante, massa de catalisador e alíquota de peróxido de hidrogênio. As constantes de velocidade das reações foram determinadas apenas para o material obtido pela rota assistida por micro-ondas, visto que os dois compósitos apresentam propriedades físicas idênticas e, portanto optou-se por este compósito, uma vez que a síntese é realizada em menos tempo (30 minutos contra 20 horas do método convencional). Os ensaios de reação de foto-Fenton apontam que esse compósito tem desempenho efetivo para a degradação de poluente orgânico em solução, com remoção total de cor em 60 min de reação para o corante Vermelho Ácido 27, em concentração de 50 mg.L-1.Fundação de Amparo a Pesquisa no Estado do Rio Grande do Sulapplication/pdfporUniversidade Federal de Santa MariaPrograma de Pós-Graduação em Engenharia de ProcessosUFSMBREngenharia de ProcessosFerrita de níquelNanotubosCompósitoSínteseMicro-ondasFoto-FentonNickel ferriteNanotubesCompositeSynthesisMicrowavePhoto-FentonCNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAOPreparação do compósito ferrita de níquel/nanotubos de carbono por micro-ondas para uso na reação de foto-fentoninfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisFoletto, Edson Luizhttp://lattes.cnpq.br/6550340290019699Collazzo, Gabriela CarvalhoCarreño, Neftalí Lenin Villarrealhttp://lattes.cnpq.br/4035574249612354http://lattes.cnpq.br/1797274948409232Rigo, Caroline3008000000054005003003003007aa8fe58-3c70-4a11-ab62-f8c72e2118cbfbdb5ceb-3804-4d8d-843e-35b255d9437d92a7858c-4402-4415-9eec-97d7078225a5abceec95-646a-4084-82a5-bf60be04dfd4info:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações do UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSMORIGINALRIGO, CAROLINE.pdfapplication/pdf1060692http://repositorio.ufsm.br/bitstream/1/7999/1/RIGO%2c%20CAROLINE.pdfef17407d1e3822ed776088159eb6ddb1MD51TEXTRIGO, CAROLINE.pdf.txtRIGO, CAROLINE.pdf.txtExtracted texttext/plain76285http://repositorio.ufsm.br/bitstream/1/7999/2/RIGO%2c%20CAROLINE.pdf.txt496c2499f0c4fed41500dc8a05e9e5b1MD52THUMBNAILRIGO, CAROLINE.pdf.jpgRIGO, CAROLINE.pdf.jpgIM Thumbnailimage/jpeg5221http://repositorio.ufsm.br/bitstream/1/7999/3/RIGO%2c%20CAROLINE.pdf.jpga66fd5f3aeb8861fff01e52221bd93fbMD531/79992022-03-24 12:52:35.931oai:repositorio.ufsm.br:1/7999Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2022-03-24T15:52:35Biblioteca Digital de Teses e Dissertações do UFSM - Universidade Federal de Santa Maria (UFSM)false |
dc.title.por.fl_str_mv |
Preparação do compósito ferrita de níquel/nanotubos de carbono por micro-ondas para uso na reação de foto-fenton |
title |
Preparação do compósito ferrita de níquel/nanotubos de carbono por micro-ondas para uso na reação de foto-fenton |
spellingShingle |
Preparação do compósito ferrita de níquel/nanotubos de carbono por micro-ondas para uso na reação de foto-fenton Rigo, Caroline Ferrita de níquel Nanotubos Compósito Síntese Micro-ondas Foto-Fenton Nickel ferrite Nanotubes Composite Synthesis Microwave Photo-Fenton CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO |
title_short |
Preparação do compósito ferrita de níquel/nanotubos de carbono por micro-ondas para uso na reação de foto-fenton |
title_full |
Preparação do compósito ferrita de níquel/nanotubos de carbono por micro-ondas para uso na reação de foto-fenton |
title_fullStr |
Preparação do compósito ferrita de níquel/nanotubos de carbono por micro-ondas para uso na reação de foto-fenton |
title_full_unstemmed |
Preparação do compósito ferrita de níquel/nanotubos de carbono por micro-ondas para uso na reação de foto-fenton |
title_sort |
Preparação do compósito ferrita de níquel/nanotubos de carbono por micro-ondas para uso na reação de foto-fenton |
author |
Rigo, Caroline |
author_facet |
Rigo, Caroline |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Foletto, Edson Luiz |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/6550340290019699 |
dc.contributor.referee1.fl_str_mv |
Collazzo, Gabriela Carvalho |
dc.contributor.referee2.fl_str_mv |
Carreño, Neftalí Lenin Villarreal |
dc.contributor.referee2Lattes.fl_str_mv |
http://lattes.cnpq.br/4035574249612354 |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/1797274948409232 |
dc.contributor.author.fl_str_mv |
Rigo, Caroline |
contributor_str_mv |
Foletto, Edson Luiz Collazzo, Gabriela Carvalho Carreño, Neftalí Lenin Villarreal |
dc.subject.por.fl_str_mv |
Ferrita de níquel Nanotubos Compósito Síntese Micro-ondas Foto-Fenton |
topic |
Ferrita de níquel Nanotubos Compósito Síntese Micro-ondas Foto-Fenton Nickel ferrite Nanotubes Composite Synthesis Microwave Photo-Fenton CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO |
dc.subject.eng.fl_str_mv |
Nickel ferrite Nanotubes Composite Synthesis Microwave Photo-Fenton |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO |
description |
In this study, the synthesis of the nickel ferrite composite/carbon nanotubes was accomplished through two different routes: conventional solvothermal method and solvothermal method assisted by microwave. The influence of the synthesis route into material's physical properties was investigated. Furthermore, the nickel ferrite, without carbon nanotubes presence, was synthesized by the solvothermal method assisted by microwave. The obtained materials were characterized by X-Ray Diffraction (XRD), Fourier Transform Infrared spectroscopy (FTIR), surface area and adsorption-desorption measurements by the Brunauer-Emmett-Teller method (BET), Differential Thermal Analysis (TGA) and Raman spectroscopy The materials produced were used as photo-Fenton catalysts for heterogeneous reactions, aiming the degradation of an organic dye (Acid Red 27) under the irradiation of visible light. The assays were performed in order to analyze the different process variables, citing pH, dye concentration, the mass of the catalyst and the hydrogen peroxide aliquot. The reactions rates constants were determined only for the material obtained through the route assisted by microwave, since the two composites present similar physical properties, and therefore we chose this composite , once the synthesis is performed in less time (30 minutes versus 20 hours the conventional method). The photo-Fenton reaction assays indicate that this composite has effective performance into degradation of organic pollutants in solution, with total color removal in 60 minutes of reaction for Acid Red dye concentration of 50 mg.L-1. |
publishDate |
2015 |
dc.date.issued.fl_str_mv |
2015-08-21 |
dc.date.accessioned.fl_str_mv |
2016-04-01 |
dc.date.available.fl_str_mv |
2016-04-01 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
RIGO, Caroline. PREPARAÇÃO DO COMPÓSITO FERRITA DE NÍQUEL/NANOTUBOS DE CARBONO POR MICRO-ONDAS PARA USO NA REAÇÃO DE FOTO-FENTON. 2015. 57 f. Dissertação (Mestrado em Engenharia) - Universidade Federal de Santa Maria, Santa Maria, 2015. |
dc.identifier.uri.fl_str_mv |
http://repositorio.ufsm.br/handle/1/7999 |
identifier_str_mv |
RIGO, Caroline. PREPARAÇÃO DO COMPÓSITO FERRITA DE NÍQUEL/NANOTUBOS DE CARBONO POR MICRO-ONDAS PARA USO NA REAÇÃO DE FOTO-FENTON. 2015. 57 f. Dissertação (Mestrado em Engenharia) - Universidade Federal de Santa Maria, Santa Maria, 2015. |
url |
http://repositorio.ufsm.br/handle/1/7999 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.cnpq.fl_str_mv |
300800000005 |
dc.relation.confidence.fl_str_mv |
400 500 300 300 300 |
dc.relation.authority.fl_str_mv |
7aa8fe58-3c70-4a11-ab62-f8c72e2118cb fbdb5ceb-3804-4d8d-843e-35b255d9437d 92a7858c-4402-4415-9eec-97d7078225a5 abceec95-646a-4084-82a5-bf60be04dfd4 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia de Processos |
dc.publisher.initials.fl_str_mv |
UFSM |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Engenharia de Processos |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações do UFSM instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Biblioteca Digital de Teses e Dissertações do UFSM |
collection |
Biblioteca Digital de Teses e Dissertações do UFSM |
bitstream.url.fl_str_mv |
http://repositorio.ufsm.br/bitstream/1/7999/1/RIGO%2c%20CAROLINE.pdf http://repositorio.ufsm.br/bitstream/1/7999/2/RIGO%2c%20CAROLINE.pdf.txt http://repositorio.ufsm.br/bitstream/1/7999/3/RIGO%2c%20CAROLINE.pdf.jpg |
bitstream.checksum.fl_str_mv |
ef17407d1e3822ed776088159eb6ddb1 496c2499f0c4fed41500dc8a05e9e5b1 a66fd5f3aeb8861fff01e52221bd93fb |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações do UFSM - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
atendimento.sib@ufsm.br||tedebc@gmail.com |
_version_ |
1793240130831515648 |