Implementação de uma estrutura de controle indireto da concentração de etanol em uma coluna de destilação híbrida
Ano de defesa: | 2013 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | , , |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal de Santa Maria
|
Programa de Pós-Graduação: |
Programa de Pós-Graduação em Engenharia de Processos
|
Departamento: |
Engenharia de Processos
|
País: |
BR
|
Palavras-chave em Português: | |
Palavras-chave em Inglês: | |
Área do conhecimento CNPq: | |
Link de acesso: | http://repositorio.ufsm.br/handle/1/7958 |
Resumo: | The unit operation of distillation demands the largest amount of energy in the ethanol separation. It is of utmost interest to minimize the energy expended in the process, playing the control an important role on this task. Here a Proportional-Integral- Derivative (PID) controller is proposed to ensure the fuel ethanol composition at desired value, i. e., above 92,5°INPM as the same time as save energy through the minimal use of reboiler power. It is well known that the composition analyzers are expensive and have a high response time. Due to such limitation, we have developed an inference model in which the product composition is inferred from the product temperature and thermodynamics relations, enabling the monitoring and the indirect control a posteriori of this variable. In addition, the inference of composition allows defining the reference value of product temperature which ensures the fuel ethanol production at desired composition. The chosen control structure takes into account the reference value of product temperature as set-point of a SISO (Single Input Single Output) controller, i. e., the product ethanol composition is indirectly controlled by the direct control of product temperature. The control design depends on a good dynamic model between the manipulated variable (reboiler power) and the controlled variable (product temperature). Such relationship was obtained by process data identification with discrete parametric models, being Output Error and ARMAX the models with the best performance. Several tuning methods were compared for the controller design. Among these methods, the Internal Model Control (IMC) has presented the best relationship between robustness and performance to be used in the distillation process of this study. Finally, the proposed controller was validated in the process and the results have shown its good performance to obtain the product composition at desired value. Thus, we can conclude that the proposed controller, through the simple PID control strategy, performed as expected within the limitations of available instrumentation and the process particularities. |
id |
UFSM_c994e4a807ee2505a48f9fb0bfbd335c |
---|---|
oai_identifier_str |
oai:repositorio.ufsm.br:1/7958 |
network_acronym_str |
UFSM |
network_name_str |
Biblioteca Digital de Teses e Dissertações do UFSM |
repository_id_str |
|
spelling |
2013-08-052013-08-052013-01-31GEHLEN, Cindi de Oliveira. IMPLEMENTATION OF A INDIRECT CONTROL STRUTURE OF THE ETHANOL COMPOSITION CONTROL IN A HYBRID DISTILLATION COLUMN. 2013. 109 f. Dissertação (Mestrado em Engenharia) - Universidade Federal de Santa Maria, Santa Maria, 2013.http://repositorio.ufsm.br/handle/1/7958The unit operation of distillation demands the largest amount of energy in the ethanol separation. It is of utmost interest to minimize the energy expended in the process, playing the control an important role on this task. Here a Proportional-Integral- Derivative (PID) controller is proposed to ensure the fuel ethanol composition at desired value, i. e., above 92,5°INPM as the same time as save energy through the minimal use of reboiler power. It is well known that the composition analyzers are expensive and have a high response time. Due to such limitation, we have developed an inference model in which the product composition is inferred from the product temperature and thermodynamics relations, enabling the monitoring and the indirect control a posteriori of this variable. In addition, the inference of composition allows defining the reference value of product temperature which ensures the fuel ethanol production at desired composition. The chosen control structure takes into account the reference value of product temperature as set-point of a SISO (Single Input Single Output) controller, i. e., the product ethanol composition is indirectly controlled by the direct control of product temperature. The control design depends on a good dynamic model between the manipulated variable (reboiler power) and the controlled variable (product temperature). Such relationship was obtained by process data identification with discrete parametric models, being Output Error and ARMAX the models with the best performance. Several tuning methods were compared for the controller design. Among these methods, the Internal Model Control (IMC) has presented the best relationship between robustness and performance to be used in the distillation process of this study. Finally, the proposed controller was validated in the process and the results have shown its good performance to obtain the product composition at desired value. Thus, we can conclude that the proposed controller, through the simple PID control strategy, performed as expected within the limitations of available instrumentation and the process particularities.A operação unitária de destilação exige uma grande quantidade de energia na separação de etanol. É de extremo interesse minimizar a energia gasta no processo e, nesta tarefa, o controle desempenha um papel importante. Neste trabalho, um controlador Proporcional-Integral-Derivativo (PID) é proposto para assegurar a concentração de etanol combustível no valor desejado, isto é, próximo de 92º INPM, assim como economizar energia através do mínimo consumo energético no refervedor. É bem conhecido que os analisadores de concentração apresentam um alto custo e tem um tempo de resposta elevado. Devido a estas limitações foi desenvolvido um modelo de inferência no qual a concentração do produto é inferida através da combinação entre a temperatura do produto e relações termodinâmicas, proporcionando o monitoramento e, posteriormente, o controle indireto desta variável. Além disso, a inferência da concentração permite definir o valor de referência da temperatura do produto que assegure a produção de etanol na concentração desejada. A estrutura de controle escolhida leva em consideração o valor de referência da temperatura do produto, como ponto de ajuste do controlador SISO (Single Input Single Output) e, deste modo, a concentração de etanol no produto é controlada indiretamente pelo controle direto da temperatura do produto. O projeto do controlador depende de um bom modelo dinâmico entre a variável manipulada (potência do refervedor) e a variável controlada (temperatura do produto). Esta relação foi obtida por meio da identificação de dados do processo com modelos paramétricos discretos, sendo que o Output Error e o ARMAX os modelos que apresentaram o melhor desempenho. Vários métodos de sintonia foram comparados para o projeto do controlador. Entre estes métodos, o Internal Model Control (IMC) apresentou a melhor relação entre a robustez e o desempenho para ser utilizado no processo de destilação em estudo. A seguir, o controlador proposto foi validado no processo e os resultados mostraram o seu bom desempenho na obtenção da composição do produto no valor desejado. Pode-se concluir que o controlador PID proposto apresentou o desempenho esperado, dentro das limitações da instrumentação disponível e das particularidades do processo.Coordenação de Aperfeiçoamento de Pessoal de Nível Superiorapplication/pdfporUniversidade Federal de Santa MariaPrograma de Pós-Graduação em Engenharia de ProcessosUFSMBREngenharia de ProcessosControlador PIDInferênciaIdentificaçãoDestilaçãoPID controllerInferenceIdentificationDistillationCNPQ::CIENCIAS EXATAS E DA TERRA::QUIMICAImplementação de uma estrutura de controle indireto da concentração de etanol em uma coluna de destilação híbridaImplementation of a indirect control struture of the ethanol composition control in a hybrid distillation columninfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisHoffmann, Ronaldohttp://lattes.cnpq.br/4625067103734943Soares, Rafael de PelegriniFranchi, Claiton MoroSalau, Nina Paula Gonçalveshttp://lattes.cnpq.br/9382577278636445Gehlen, Cindi de Oliveira100600000000400300300500500500b85fa86d-dc82-49f8-a2fa-f893ac72eceff8866a6a-4811-415d-bccd-f73679f17d670f0b54d1-f32c-4fac-b68b-6cb5f1f3dae43cd76448-fb79-4eef-964a-72648182483c6bd6f048-e91a-455c-a216-bc6cc0ceb1dainfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações do UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSMORIGINALGEHLEN, CINDI DE OLIVEIRA.pdfapplication/pdf4263884http://repositorio.ufsm.br/bitstream/1/7958/1/GEHLEN%2c%20CINDI%20DE%20OLIVEIRA.pdf70dd0fe94c05a53a4c02a975d1ae5c2cMD51TEXTGEHLEN, CINDI DE OLIVEIRA.pdf.txtGEHLEN, CINDI DE OLIVEIRA.pdf.txtExtracted texttext/plain190655http://repositorio.ufsm.br/bitstream/1/7958/2/GEHLEN%2c%20CINDI%20DE%20OLIVEIRA.pdf.txt8a0afc77e913ff3f42c0ce57ca268d87MD52THUMBNAILGEHLEN, CINDI DE OLIVEIRA.pdf.jpgGEHLEN, CINDI DE OLIVEIRA.pdf.jpgIM Thumbnailimage/jpeg5090http://repositorio.ufsm.br/bitstream/1/7958/3/GEHLEN%2c%20CINDI%20DE%20OLIVEIRA.pdf.jpg3fc374ef3f64461db4e92e0664d94c2bMD531/79582021-10-22 09:45:54.045oai:repositorio.ufsm.br:1/7958Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2021-10-22T12:45:54Biblioteca Digital de Teses e Dissertações do UFSM - Universidade Federal de Santa Maria (UFSM)false |
dc.title.por.fl_str_mv |
Implementação de uma estrutura de controle indireto da concentração de etanol em uma coluna de destilação híbrida |
dc.title.alternative.eng.fl_str_mv |
Implementation of a indirect control struture of the ethanol composition control in a hybrid distillation column |
title |
Implementação de uma estrutura de controle indireto da concentração de etanol em uma coluna de destilação híbrida |
spellingShingle |
Implementação de uma estrutura de controle indireto da concentração de etanol em uma coluna de destilação híbrida Gehlen, Cindi de Oliveira Controlador PID Inferência Identificação Destilação PID controller Inference Identification Distillation CNPQ::CIENCIAS EXATAS E DA TERRA::QUIMICA |
title_short |
Implementação de uma estrutura de controle indireto da concentração de etanol em uma coluna de destilação híbrida |
title_full |
Implementação de uma estrutura de controle indireto da concentração de etanol em uma coluna de destilação híbrida |
title_fullStr |
Implementação de uma estrutura de controle indireto da concentração de etanol em uma coluna de destilação híbrida |
title_full_unstemmed |
Implementação de uma estrutura de controle indireto da concentração de etanol em uma coluna de destilação híbrida |
title_sort |
Implementação de uma estrutura de controle indireto da concentração de etanol em uma coluna de destilação híbrida |
author |
Gehlen, Cindi de Oliveira |
author_facet |
Gehlen, Cindi de Oliveira |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Hoffmann, Ronaldo |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/4625067103734943 |
dc.contributor.referee1.fl_str_mv |
Soares, Rafael de Pelegrini |
dc.contributor.referee2.fl_str_mv |
Franchi, Claiton Moro |
dc.contributor.referee3.fl_str_mv |
Salau, Nina Paula Gonçalves |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/9382577278636445 |
dc.contributor.author.fl_str_mv |
Gehlen, Cindi de Oliveira |
contributor_str_mv |
Hoffmann, Ronaldo Soares, Rafael de Pelegrini Franchi, Claiton Moro Salau, Nina Paula Gonçalves |
dc.subject.por.fl_str_mv |
Controlador PID Inferência Identificação Destilação |
topic |
Controlador PID Inferência Identificação Destilação PID controller Inference Identification Distillation CNPQ::CIENCIAS EXATAS E DA TERRA::QUIMICA |
dc.subject.eng.fl_str_mv |
PID controller Inference Identification Distillation |
dc.subject.cnpq.fl_str_mv |
CNPQ::CIENCIAS EXATAS E DA TERRA::QUIMICA |
description |
The unit operation of distillation demands the largest amount of energy in the ethanol separation. It is of utmost interest to minimize the energy expended in the process, playing the control an important role on this task. Here a Proportional-Integral- Derivative (PID) controller is proposed to ensure the fuel ethanol composition at desired value, i. e., above 92,5°INPM as the same time as save energy through the minimal use of reboiler power. It is well known that the composition analyzers are expensive and have a high response time. Due to such limitation, we have developed an inference model in which the product composition is inferred from the product temperature and thermodynamics relations, enabling the monitoring and the indirect control a posteriori of this variable. In addition, the inference of composition allows defining the reference value of product temperature which ensures the fuel ethanol production at desired composition. The chosen control structure takes into account the reference value of product temperature as set-point of a SISO (Single Input Single Output) controller, i. e., the product ethanol composition is indirectly controlled by the direct control of product temperature. The control design depends on a good dynamic model between the manipulated variable (reboiler power) and the controlled variable (product temperature). Such relationship was obtained by process data identification with discrete parametric models, being Output Error and ARMAX the models with the best performance. Several tuning methods were compared for the controller design. Among these methods, the Internal Model Control (IMC) has presented the best relationship between robustness and performance to be used in the distillation process of this study. Finally, the proposed controller was validated in the process and the results have shown its good performance to obtain the product composition at desired value. Thus, we can conclude that the proposed controller, through the simple PID control strategy, performed as expected within the limitations of available instrumentation and the process particularities. |
publishDate |
2013 |
dc.date.accessioned.fl_str_mv |
2013-08-05 |
dc.date.available.fl_str_mv |
2013-08-05 |
dc.date.issued.fl_str_mv |
2013-01-31 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
GEHLEN, Cindi de Oliveira. IMPLEMENTATION OF A INDIRECT CONTROL STRUTURE OF THE ETHANOL COMPOSITION CONTROL IN A HYBRID DISTILLATION COLUMN. 2013. 109 f. Dissertação (Mestrado em Engenharia) - Universidade Federal de Santa Maria, Santa Maria, 2013. |
dc.identifier.uri.fl_str_mv |
http://repositorio.ufsm.br/handle/1/7958 |
identifier_str_mv |
GEHLEN, Cindi de Oliveira. IMPLEMENTATION OF A INDIRECT CONTROL STRUTURE OF THE ETHANOL COMPOSITION CONTROL IN A HYBRID DISTILLATION COLUMN. 2013. 109 f. Dissertação (Mestrado em Engenharia) - Universidade Federal de Santa Maria, Santa Maria, 2013. |
url |
http://repositorio.ufsm.br/handle/1/7958 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.cnpq.fl_str_mv |
100600000000 |
dc.relation.confidence.fl_str_mv |
400 300 300 500 500 500 |
dc.relation.authority.fl_str_mv |
b85fa86d-dc82-49f8-a2fa-f893ac72ecef f8866a6a-4811-415d-bccd-f73679f17d67 0f0b54d1-f32c-4fac-b68b-6cb5f1f3dae4 3cd76448-fb79-4eef-964a-72648182483c 6bd6f048-e91a-455c-a216-bc6cc0ceb1da |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia de Processos |
dc.publisher.initials.fl_str_mv |
UFSM |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Engenharia de Processos |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações do UFSM instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Biblioteca Digital de Teses e Dissertações do UFSM |
collection |
Biblioteca Digital de Teses e Dissertações do UFSM |
bitstream.url.fl_str_mv |
http://repositorio.ufsm.br/bitstream/1/7958/1/GEHLEN%2c%20CINDI%20DE%20OLIVEIRA.pdf http://repositorio.ufsm.br/bitstream/1/7958/2/GEHLEN%2c%20CINDI%20DE%20OLIVEIRA.pdf.txt http://repositorio.ufsm.br/bitstream/1/7958/3/GEHLEN%2c%20CINDI%20DE%20OLIVEIRA.pdf.jpg |
bitstream.checksum.fl_str_mv |
70dd0fe94c05a53a4c02a975d1ae5c2c 8a0afc77e913ff3f42c0ce57ca268d87 3fc374ef3f64461db4e92e0664d94c2b |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações do UFSM - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
atendimento.sib@ufsm.br||tedebc@gmail.com |
_version_ |
1793240116359069696 |