Estudo de carga lateral e de ponta em estacas moldadas in loco via metodologia alternativa de prova de carga
Ano de defesa: | 2012 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal de Viçosa
|
Programa de Pós-Graduação: |
Mestrado em Engenharia Civil
|
Departamento: |
Geotecnia; Saneamento ambiental
|
País: |
BR
|
Palavras-chave em Português: | |
Palavras-chave em Inglês: | |
Área do conhecimento CNPq: | |
Link de acesso: | http://locus.ufv.br/handle/123456789/3814 |
Resumo: | This paper deals with the study of the permissible load or load-resistant design through testing Static Load Test on deep foundation, this test differs from the other through a system of reaction (hydraulic jack), implanted inside the element structural convenient depth, ie run as part of the cutting element of reaction, precluding the need for an external system. The hydraulic jack is called Expansiva cell hydrodynamics and their use is intended to obtain geotechnical parameters by means of load versus displacement curves, which show the evolution of the equilibrium of the system under the applied load. The recorded parameters enabled the comparative analysis of the data obtained by analyzing the curves of load tests with the parameters of the estimated carrying capacity of the soil mass, obtained by means of semi-empirical methods of foundation engineering. It was concluded that even with the adjustments of the semi-empirical methods, the permissible load is calculated by such methods over dimensioned compared with that obtained by analysis of load versus displacement curves also verified that the methodology presented proof load is easy to perform and has good efficiency for development of the test static load test. |
id |
UFV_2a8bc5372b34f39336ab7db5680ddce7 |
---|---|
oai_identifier_str |
oai:locus.ufv.br:123456789/3814 |
network_acronym_str |
UFV |
network_name_str |
LOCUS Repositório Institucional da UFV |
repository_id_str |
|
spelling |
Ontiveros, José Alberto Soria GalvarroSantiago, Luis Otávio Rigueirahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4742445D8Minette, Enivaldohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4781010H4Duarte, Leandro Neveshttp://lattes.cnpq.br/90070818059238752015-03-26T13:28:25Z2014-04-142015-03-26T13:28:25Z2012-12-20http://locus.ufv.br/handle/123456789/3814This paper deals with the study of the permissible load or load-resistant design through testing Static Load Test on deep foundation, this test differs from the other through a system of reaction (hydraulic jack), implanted inside the element structural convenient depth, ie run as part of the cutting element of reaction, precluding the need for an external system. The hydraulic jack is called Expansiva cell hydrodynamics and their use is intended to obtain geotechnical parameters by means of load versus displacement curves, which show the evolution of the equilibrium of the system under the applied load. The recorded parameters enabled the comparative analysis of the data obtained by analyzing the curves of load tests with the parameters of the estimated carrying capacity of the soil mass, obtained by means of semi-empirical methods of foundation engineering. It was concluded that even with the adjustments of the semi-empirical methods, the permissible load is calculated by such methods over dimensioned compared with that obtained by analysis of load versus displacement curves also verified that the methodology presented proof load is easy to perform and has good efficiency for development of the test static load test.O presente trabalho trata do estudo da carga admissível ou da carga resistente de projeto por meio do ensaio de Prova de Carga Estática em fundação profunda, tal ensaio se difere dos demais através de um sistema de reação (macaco hidráulico), implantado no interior do elemento estrutural, em profundidade conveniente, ou seja, parte da estaca funcionada como elemento de reação, excluindo a necessidade de um sistema externo. O macaco hidráulico é denominado Célula Expansiva Hidrodinâmica e o seu uso tem a finalidade de obter parâmetros geotécnicos, através de curvas de carga x deslocamento, que evidenciam a evolução do equilíbrio do sistema com a carga aplicada. Os parâmetros registrados propiciaram a análise comparativa dos dados obtidos através da análise das curvas das provas de carga com os parâmetros da estimativa da capacidade de carga do maciço de solo, obtidos por meio dos métodos semi-empíricos da engenharia de fundações. Concluiu- se que mesmo com as adequações dos métodos semi-empíricos, a carga admissível calculada por tais métodos foi sobre dimensionada, quando comparada com a obtida através da análise das curvas carga x deslocamento, também verificou-se que a metodologia apresentada de prova de carga é de fácil execução e tem boa eficiência para elaboração do ensaio de prova de carga estática.application/pdfporUniversidade Federal de ViçosaMestrado em Engenharia CivilUFVBRGeotecnia; Saneamento ambientalAtrito lateralEstacasProva de cargaLateral frictionPolesProof loadCNPQ::ENGENHARIAS::ENGENHARIA CIVILEstudo de carga lateral e de ponta em estacas moldadas in loco via metodologia alternativa de prova de cargaChecking the load capacity of bored piles through new methodology for load testinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:LOCUS Repositório Institucional da UFVinstname:Universidade Federal de Viçosa (UFV)instacron:UFVORIGINALtexto completo.pdfapplication/pdf5794031https://locus.ufv.br//bitstream/123456789/3814/1/texto%20completo.pdf6385868d5c4cc5dafb016be2120b521aMD51THUMBNAILtexto completo.pdf.jpgtexto completo.pdf.jpgIM Thumbnailimage/jpeg3836https://locus.ufv.br//bitstream/123456789/3814/2/texto%20completo.pdf.jpgb42e871d5c9f7a9f1153ca3eebd194aaMD52123456789/38142016-04-09 23:17:18.198oai:locus.ufv.br:123456789/3814Repositório InstitucionalPUBhttps://www.locus.ufv.br/oai/requestfabiojreis@ufv.bropendoar:21452016-04-10T02:17:18LOCUS Repositório Institucional da UFV - Universidade Federal de Viçosa (UFV)false |
dc.title.por.fl_str_mv |
Estudo de carga lateral e de ponta em estacas moldadas in loco via metodologia alternativa de prova de carga |
dc.title.alternative.eng.fl_str_mv |
Checking the load capacity of bored piles through new methodology for load test |
title |
Estudo de carga lateral e de ponta em estacas moldadas in loco via metodologia alternativa de prova de carga |
spellingShingle |
Estudo de carga lateral e de ponta em estacas moldadas in loco via metodologia alternativa de prova de carga Ontiveros, José Alberto Soria Galvarro Atrito lateral Estacas Prova de carga Lateral friction Poles Proof load CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
title_short |
Estudo de carga lateral e de ponta em estacas moldadas in loco via metodologia alternativa de prova de carga |
title_full |
Estudo de carga lateral e de ponta em estacas moldadas in loco via metodologia alternativa de prova de carga |
title_fullStr |
Estudo de carga lateral e de ponta em estacas moldadas in loco via metodologia alternativa de prova de carga |
title_full_unstemmed |
Estudo de carga lateral e de ponta em estacas moldadas in loco via metodologia alternativa de prova de carga |
title_sort |
Estudo de carga lateral e de ponta em estacas moldadas in loco via metodologia alternativa de prova de carga |
author |
Ontiveros, José Alberto Soria Galvarro |
author_facet |
Ontiveros, José Alberto Soria Galvarro |
author_role |
author |
dc.contributor.author.fl_str_mv |
Ontiveros, José Alberto Soria Galvarro |
dc.contributor.advisor-co1.fl_str_mv |
Santiago, Luis Otávio Rigueira |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4742445D8 |
dc.contributor.advisor1.fl_str_mv |
Minette, Enivaldo |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4781010H4 |
dc.contributor.referee1.fl_str_mv |
Duarte, Leandro Neves |
dc.contributor.referee1Lattes.fl_str_mv |
http://lattes.cnpq.br/9007081805923875 |
contributor_str_mv |
Santiago, Luis Otávio Rigueira Minette, Enivaldo Duarte, Leandro Neves |
dc.subject.por.fl_str_mv |
Atrito lateral Estacas Prova de carga |
topic |
Atrito lateral Estacas Prova de carga Lateral friction Poles Proof load CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
dc.subject.eng.fl_str_mv |
Lateral friction Poles Proof load |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
description |
This paper deals with the study of the permissible load or load-resistant design through testing Static Load Test on deep foundation, this test differs from the other through a system of reaction (hydraulic jack), implanted inside the element structural convenient depth, ie run as part of the cutting element of reaction, precluding the need for an external system. The hydraulic jack is called Expansiva cell hydrodynamics and their use is intended to obtain geotechnical parameters by means of load versus displacement curves, which show the evolution of the equilibrium of the system under the applied load. The recorded parameters enabled the comparative analysis of the data obtained by analyzing the curves of load tests with the parameters of the estimated carrying capacity of the soil mass, obtained by means of semi-empirical methods of foundation engineering. It was concluded that even with the adjustments of the semi-empirical methods, the permissible load is calculated by such methods over dimensioned compared with that obtained by analysis of load versus displacement curves also verified that the methodology presented proof load is easy to perform and has good efficiency for development of the test static load test. |
publishDate |
2012 |
dc.date.issued.fl_str_mv |
2012-12-20 |
dc.date.available.fl_str_mv |
2014-04-14 2015-03-26T13:28:25Z |
dc.date.accessioned.fl_str_mv |
2015-03-26T13:28:25Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://locus.ufv.br/handle/123456789/3814 |
url |
http://locus.ufv.br/handle/123456789/3814 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Viçosa |
dc.publisher.program.fl_str_mv |
Mestrado em Engenharia Civil |
dc.publisher.initials.fl_str_mv |
UFV |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Geotecnia; Saneamento ambiental |
publisher.none.fl_str_mv |
Universidade Federal de Viçosa |
dc.source.none.fl_str_mv |
reponame:LOCUS Repositório Institucional da UFV instname:Universidade Federal de Viçosa (UFV) instacron:UFV |
instname_str |
Universidade Federal de Viçosa (UFV) |
instacron_str |
UFV |
institution |
UFV |
reponame_str |
LOCUS Repositório Institucional da UFV |
collection |
LOCUS Repositório Institucional da UFV |
bitstream.url.fl_str_mv |
https://locus.ufv.br//bitstream/123456789/3814/1/texto%20completo.pdf https://locus.ufv.br//bitstream/123456789/3814/2/texto%20completo.pdf.jpg |
bitstream.checksum.fl_str_mv |
6385868d5c4cc5dafb016be2120b521a b42e871d5c9f7a9f1153ca3eebd194aa |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 |
repository.name.fl_str_mv |
LOCUS Repositório Institucional da UFV - Universidade Federal de Viçosa (UFV) |
repository.mail.fl_str_mv |
fabiojreis@ufv.br |
_version_ |
1794528645165875200 |