Comparação de três métodos de interpolação na construção de mapas temáticos

Detalhes bibliográficos
Ano de defesa: 2012
Autor(a) principal: Betzek, Nelson Miguel lattes
Orientador(a): Souza, Eduardo Godoy de lattes
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Estadual do Oeste do Parana
Programa de Pós-Graduação: Programa de Pós-Graduação "Stricto Sensu" em Engenharia Agrícola
Departamento: Engenharia
País: BR
Palavras-chave em Português:
Palavras-chave em Inglês:
Área do conhecimento CNPq:
Link de acesso: http://tede.unioeste.br:8080/tede/handle/tede/2862
Resumo: Samples of soil and plant properties are collected and analyzed to apply at precision agriculture (PA) and obtain information that can help on a decision making in order to correct problems that have been detected in the studied areas. Thus, computer systems are used to generate thematic maps by interpolation of sample data to measure information for nonsampled locations. The choice of interpolation method to be used is an important aspect, since most of the interpolators do not preserve the original data, so the thematic map is affected. The accuracy with which the spatial distribution maps of yield and soil properties are produced during the interpolation process influences the implementation and use of PA. A set of data from 55 samples of chemical properties of a soil and 130 samples of soybean yield, 2010/2011 harvest, were analyzed to compare three interpolation methods (inverse distance, inverse distance squared and ordinary kriging) on the thematic maps drawing. Maps of ten chemical properties of soil and two samples concerning yield were compared, using Kappa, Tau and CDR. It was observed some variation with the results and that the interpolation influence depends on the attribute and data frequency. However, kriging and inverse square distance were considered the methods that generated maps with lower dispersion of data
id UNIOESTE-1_0ffeeaad34c78f7df094aea3acab2051
oai_identifier_str oai:tede.unioeste.br:tede/2862
network_acronym_str UNIOESTE-1
network_name_str Biblioteca Digital de Teses e Dissertações do UNIOESTE
repository_id_str
spelling Souza, Eduardo Godoy deCPF:04584214808http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4721691H5CPF:74504797968http://lattes.cnpq.br/6096556716682492Betzek, Nelson Miguel2017-07-10T19:25:10Z2013-01-242012-04-09BETZEK, Nelson Miguel. Comparison of three methods of interpolation on thematic maps Drawing. 2012. 72 f. Dissertação (Mestrado em Engenharia) - Universidade Estadual do Oeste do Parana, Cascavel, 2012.http://tede.unioeste.br:8080/tede/handle/tede/2862Samples of soil and plant properties are collected and analyzed to apply at precision agriculture (PA) and obtain information that can help on a decision making in order to correct problems that have been detected in the studied areas. Thus, computer systems are used to generate thematic maps by interpolation of sample data to measure information for nonsampled locations. The choice of interpolation method to be used is an important aspect, since most of the interpolators do not preserve the original data, so the thematic map is affected. The accuracy with which the spatial distribution maps of yield and soil properties are produced during the interpolation process influences the implementation and use of PA. A set of data from 55 samples of chemical properties of a soil and 130 samples of soybean yield, 2010/2011 harvest, were analyzed to compare three interpolation methods (inverse distance, inverse distance squared and ordinary kriging) on the thematic maps drawing. Maps of ten chemical properties of soil and two samples concerning yield were compared, using Kappa, Tau and CDR. It was observed some variation with the results and that the interpolation influence depends on the attribute and data frequency. However, kriging and inverse square distance were considered the methods that generated maps with lower dispersion of dataNo uso da agricultura de precisão (AP), amostras de atributos do solo e planta são coletadas e analisadas visando à obtenção de informações que sirvam como subsídio para a tomada de decisão, a fim de se corrigirem problemas detectados nas áreas analisadas. Para tanto, são utilizados sistemas computacionais capazes de gerar mapas temáticos, através da interpolação dos dados amostrais, visando mensurar informações para os locais não amostrados. Um aspecto importante é a escolha do método de interpolação a ser utilizado, visto que a maioria dos interpoladores não preservam os dados originais, assim, afetam o mapa temático gerado. A acurácia com que os mapas de distribuição espacial da produtividade e dos atributos do solo são produzidos no processo de interpolação influencia a aplicação e utilização da AP. Um conjunto de dados referentes a 55 amostras de atributos químicos do solo e 130 amostras de produtividade de soja, safra 2010/2011, foram analisados com o objetivo de comparar três métodos de interpolação (inverso da distância, inverso do quadrado da distância e krigagem ordinária) na construção de mapas temáticos. Foram comparados mapas de dez atributos químicos do solo e duas amostragens da produtividade, utilizando os índices Kappa, Tau e CDR. Constatou-se variação nos resultados e que a influência do interpolador depende do atributo e da frequência dos dados. Porém, a krigagem e o inverso do quadrado da distância foram considerados os métodos que geraram mapas com menor dispersão dos dadosMade available in DSpace on 2017-07-10T19:25:10Z (GMT). No. of bitstreams: 1 Nelson.pdf: 9957138 bytes, checksum: 2755a98d59b67d1599170871a86fe3cd (MD5) Previous issue date: 2012-04-09application/pdfporUniversidade Estadual do Oeste do ParanaPrograma de Pós-Graduação "Stricto Sensu" em Engenharia AgrícolaUNIOESTEBREngenhariaagricultura de precisãogeoestatísticavariabilidade espacialgeostatisticsprecision agriculturespatial variabilityCNPQ::CIENCIAS AGRARIAS::ENGENHARIA AGRICOLAComparação de três métodos de interpolação na construção de mapas temáticosComparison of three methods of interpolation on thematic maps Drawinginfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações do UNIOESTEinstname:Universidade Estadual do Oeste do Paraná (UNIOESTE)instacron:UNIOESTEORIGINALNelson.pdfapplication/pdf9957138http://tede.unioeste.br:8080/tede/bitstream/tede/2862/1/Nelson.pdf2755a98d59b67d1599170871a86fe3cdMD51tede/28622017-07-10 16:25:10.838oai:tede.unioeste.br:tede/2862Biblioteca Digital de Teses e Dissertaçõeshttp://tede.unioeste.br/PUBhttp://tede.unioeste.br/oai/requestbiblioteca.repositorio@unioeste.bropendoar:2017-07-10T19:25:10Biblioteca Digital de Teses e Dissertações do UNIOESTE - Universidade Estadual do Oeste do Paraná (UNIOESTE)false
dc.title.por.fl_str_mv Comparação de três métodos de interpolação na construção de mapas temáticos
dc.title.alternative.eng.fl_str_mv Comparison of three methods of interpolation on thematic maps Drawing
title Comparação de três métodos de interpolação na construção de mapas temáticos
spellingShingle Comparação de três métodos de interpolação na construção de mapas temáticos
Betzek, Nelson Miguel
agricultura de precisão
geoestatística
variabilidade espacial
geostatistics
precision agriculture
spatial variability
CNPQ::CIENCIAS AGRARIAS::ENGENHARIA AGRICOLA
title_short Comparação de três métodos de interpolação na construção de mapas temáticos
title_full Comparação de três métodos de interpolação na construção de mapas temáticos
title_fullStr Comparação de três métodos de interpolação na construção de mapas temáticos
title_full_unstemmed Comparação de três métodos de interpolação na construção de mapas temáticos
title_sort Comparação de três métodos de interpolação na construção de mapas temáticos
author Betzek, Nelson Miguel
author_facet Betzek, Nelson Miguel
author_role author
dc.contributor.advisor1.fl_str_mv Souza, Eduardo Godoy de
dc.contributor.advisor1ID.fl_str_mv CPF:04584214808
dc.contributor.advisor1Lattes.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4721691H5
dc.contributor.authorID.fl_str_mv CPF:74504797968
dc.contributor.authorLattes.fl_str_mv http://lattes.cnpq.br/6096556716682492
dc.contributor.author.fl_str_mv Betzek, Nelson Miguel
contributor_str_mv Souza, Eduardo Godoy de
dc.subject.por.fl_str_mv agricultura de precisão
geoestatística
variabilidade espacial
topic agricultura de precisão
geoestatística
variabilidade espacial
geostatistics
precision agriculture
spatial variability
CNPQ::CIENCIAS AGRARIAS::ENGENHARIA AGRICOLA
dc.subject.eng.fl_str_mv geostatistics
precision agriculture
spatial variability
dc.subject.cnpq.fl_str_mv CNPQ::CIENCIAS AGRARIAS::ENGENHARIA AGRICOLA
description Samples of soil and plant properties are collected and analyzed to apply at precision agriculture (PA) and obtain information that can help on a decision making in order to correct problems that have been detected in the studied areas. Thus, computer systems are used to generate thematic maps by interpolation of sample data to measure information for nonsampled locations. The choice of interpolation method to be used is an important aspect, since most of the interpolators do not preserve the original data, so the thematic map is affected. The accuracy with which the spatial distribution maps of yield and soil properties are produced during the interpolation process influences the implementation and use of PA. A set of data from 55 samples of chemical properties of a soil and 130 samples of soybean yield, 2010/2011 harvest, were analyzed to compare three interpolation methods (inverse distance, inverse distance squared and ordinary kriging) on the thematic maps drawing. Maps of ten chemical properties of soil and two samples concerning yield were compared, using Kappa, Tau and CDR. It was observed some variation with the results and that the interpolation influence depends on the attribute and data frequency. However, kriging and inverse square distance were considered the methods that generated maps with lower dispersion of data
publishDate 2012
dc.date.issued.fl_str_mv 2012-04-09
dc.date.available.fl_str_mv 2013-01-24
dc.date.accessioned.fl_str_mv 2017-07-10T19:25:10Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.citation.fl_str_mv BETZEK, Nelson Miguel. Comparison of three methods of interpolation on thematic maps Drawing. 2012. 72 f. Dissertação (Mestrado em Engenharia) - Universidade Estadual do Oeste do Parana, Cascavel, 2012.
dc.identifier.uri.fl_str_mv http://tede.unioeste.br:8080/tede/handle/tede/2862
identifier_str_mv BETZEK, Nelson Miguel. Comparison of three methods of interpolation on thematic maps Drawing. 2012. 72 f. Dissertação (Mestrado em Engenharia) - Universidade Estadual do Oeste do Parana, Cascavel, 2012.
url http://tede.unioeste.br:8080/tede/handle/tede/2862
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Estadual do Oeste do Parana
dc.publisher.program.fl_str_mv Programa de Pós-Graduação "Stricto Sensu" em Engenharia Agrícola
dc.publisher.initials.fl_str_mv UNIOESTE
dc.publisher.country.fl_str_mv BR
dc.publisher.department.fl_str_mv Engenharia
publisher.none.fl_str_mv Universidade Estadual do Oeste do Parana
dc.source.none.fl_str_mv reponame:Biblioteca Digital de Teses e Dissertações do UNIOESTE
instname:Universidade Estadual do Oeste do Paraná (UNIOESTE)
instacron:UNIOESTE
instname_str Universidade Estadual do Oeste do Paraná (UNIOESTE)
instacron_str UNIOESTE
institution UNIOESTE
reponame_str Biblioteca Digital de Teses e Dissertações do UNIOESTE
collection Biblioteca Digital de Teses e Dissertações do UNIOESTE
bitstream.url.fl_str_mv http://tede.unioeste.br:8080/tede/bitstream/tede/2862/1/Nelson.pdf
bitstream.checksum.fl_str_mv 2755a98d59b67d1599170871a86fe3cd
bitstream.checksumAlgorithm.fl_str_mv MD5
repository.name.fl_str_mv Biblioteca Digital de Teses e Dissertações do UNIOESTE - Universidade Estadual do Oeste do Paraná (UNIOESTE)
repository.mail.fl_str_mv biblioteca.repositorio@unioeste.br
_version_ 1794618466188132352