Comparativo da resistência mecânica superficial de um aço inoxidável endurecível por precipitação, com e sem processo de shot peening antes de ser envelhecido
Ano de defesa: | 2009 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | , |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Presbiteriana Mackenzie
|
Programa de Pós-Graduação: |
Engenharia de Materiais
|
Departamento: |
Engenharia de Materiais
|
País: |
BR
|
Palavras-chave em Português: | |
Palavras-chave em Inglês: | |
Área do conhecimento CNPq: | |
Link de acesso: | http://dspace.mackenzie.br/handle/10899/24201 |
Resumo: | Martensitic Stainless Steel hás always been used in the injection moulds because of their properties as high polishability and high corrosion resistence that alows it to inject some kind of polymers, such as PVC, because of its resistance to chlorinate gas that the process normally has, and in the injection of acrylic because of its high finishing surface state that the mould needs and, consequently, of the injected product, that are characteristics intrinsics to those materials. Beside the martensitic stainless steel, the stainless aged steel are very used, but, in such applications this steel are not able to suffer the nitriding process, what make its application not so good because there are no ways to increase its surface. In this paper will be studied about aged stainless steel that will pass through the shot peening process and without this process to see how will be the surface result. As there are no literatures about this subject, because besides it is about some old tecnologies, the study shall result in a new application of those techniques making a revolution in the utilization of those materials in some industrial applications as plastic moulds and mechanichal devices. |
id |
UPM_14eb5776f8630bbe4c2b8a518dad7160 |
---|---|
oai_identifier_str |
oai:dspace.mackenzie.br:10899/24201 |
network_acronym_str |
UPM |
network_name_str |
Biblioteca Digital de Teses e Dissertações do Mackenzie |
repository_id_str |
|
spelling |
2016-03-15T19:36:57Z2020-05-28T18:07:32Z2010-02-252020-05-28T18:07:32Z2009-04-24http://dspace.mackenzie.br/handle/10899/24201Martensitic Stainless Steel hás always been used in the injection moulds because of their properties as high polishability and high corrosion resistence that alows it to inject some kind of polymers, such as PVC, because of its resistance to chlorinate gas that the process normally has, and in the injection of acrylic because of its high finishing surface state that the mould needs and, consequently, of the injected product, that are characteristics intrinsics to those materials. Beside the martensitic stainless steel, the stainless aged steel are very used, but, in such applications this steel are not able to suffer the nitriding process, what make its application not so good because there are no ways to increase its surface. In this paper will be studied about aged stainless steel that will pass through the shot peening process and without this process to see how will be the surface result. As there are no literatures about this subject, because besides it is about some old tecnologies, the study shall result in a new application of those techniques making a revolution in the utilization of those materials in some industrial applications as plastic moulds and mechanichal devices.Os aços inoxidáveis martensíticos sempre foram muito utilizados no ramo de moldes plásticos devido as suas propriedades como alta polibilidade e resistência à oxidação elevada, que permitem a injeção de certos polímeros, como o policrilato de vinila, por conta de sua resistência aos gases clorídricos desprendidos no processo e também na injeção de acrílico por causa do alto grau de acabamento que pode ser conferida à superfície do molde e, conseqüentemente, ao produto injetado, são características intrínsecas a tais materiais. Fora os materiais inoxidáveis martensíticos, os endurecíveis por precipitação também são muitíssimo utilizados, porém, em algumas aplicações tais aços não são passíveis do processo termoquímico de nitretação, o que prejudica a sua utilização por conta de não ter nenhum processo onde um endurecimento superficial seja aplicado. Neste trabalho será realizado o estudo sobre os aços endurecíveis por precipitação passando pelo processo de shot peening e sem passar por tal processo afim de se verificar como ficará a superfície após tal processo. Como faltam literaturas sobre comparativos a respeito desta aplicação por apesar de se tratar de tecnologias antigas, o estudo poderá resultar em uma nova utilização de tais técnicas revolucionando a utilização destes materiais em certas aplicações industriais como em moldes plásticos e em dispositivos mecânicos.application/pdfporUniversidade Presbiteriana MackenzieEngenharia de MateriaisUPMBREngenharia de MateriaisAISI 17-4 Phmartensitatêmperaenvelhecimentotenacidadeshot peeningresistência mecânicaaços inoxidáveisaços endurecíveis por precipitaçãomoldes plásticosaços inoxidáveis martensíticos17-4 Phmartensitequenchingageingtoughnesshardnessshot peeningCNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICAComparativo da resistência mecânica superficial de um aço inoxidável endurecível por precipitação, com e sem processo de shot peening antes de ser envelhecidoinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisVatavuk, Janhttp://lattes.cnpq.br/2607688973456560Couto, Antonio Augustohttp://lattes.cnpq.br/2893737202813850Lima, Nelson Batista dehttp://lattes.cnpq.br/6675251190520162http://lattes.cnpq.br/0789848658917123Ribeiro, Dante da Costahttp://tede.mackenzie.br/jspui/retrieve/3631/Dante%20da%20Costa%20Ribeiro.pdf.jpghttp://tede.mackenzie.br/jspui/bitstream/tede/1370/1/Dante%20da%20Costa%20Ribeiro.pdfinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações do Mackenzieinstname:Universidade Presbiteriana Mackenzie (MACKENZIE)instacron:MACKENZIE10899/242012020-05-28 15:07:32.351Biblioteca Digital de Teses e Dissertaçõeshttp://tede.mackenzie.br/jspui/PRI |
dc.title.por.fl_str_mv |
Comparativo da resistência mecânica superficial de um aço inoxidável endurecível por precipitação, com e sem processo de shot peening antes de ser envelhecido |
title |
Comparativo da resistência mecânica superficial de um aço inoxidável endurecível por precipitação, com e sem processo de shot peening antes de ser envelhecido |
spellingShingle |
Comparativo da resistência mecânica superficial de um aço inoxidável endurecível por precipitação, com e sem processo de shot peening antes de ser envelhecido Ribeiro, Dante da Costa AISI 17-4 Ph martensita têmpera envelhecimento tenacidade shot peening resistência mecânica aços inoxidáveis aços endurecíveis por precipitação moldes plásticos aços inoxidáveis martensíticos 17-4 Ph martensite quenching ageing toughness hardness shot peening CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
title_short |
Comparativo da resistência mecânica superficial de um aço inoxidável endurecível por precipitação, com e sem processo de shot peening antes de ser envelhecido |
title_full |
Comparativo da resistência mecânica superficial de um aço inoxidável endurecível por precipitação, com e sem processo de shot peening antes de ser envelhecido |
title_fullStr |
Comparativo da resistência mecânica superficial de um aço inoxidável endurecível por precipitação, com e sem processo de shot peening antes de ser envelhecido |
title_full_unstemmed |
Comparativo da resistência mecânica superficial de um aço inoxidável endurecível por precipitação, com e sem processo de shot peening antes de ser envelhecido |
title_sort |
Comparativo da resistência mecânica superficial de um aço inoxidável endurecível por precipitação, com e sem processo de shot peening antes de ser envelhecido |
author |
Ribeiro, Dante da Costa |
author_facet |
Ribeiro, Dante da Costa |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Vatavuk, Jan |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/2607688973456560 |
dc.contributor.referee1.fl_str_mv |
Couto, Antonio Augusto |
dc.contributor.referee1Lattes.fl_str_mv |
http://lattes.cnpq.br/2893737202813850 |
dc.contributor.referee2.fl_str_mv |
Lima, Nelson Batista de |
dc.contributor.referee2Lattes.fl_str_mv |
http://lattes.cnpq.br/6675251190520162 |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/0789848658917123 |
dc.contributor.author.fl_str_mv |
Ribeiro, Dante da Costa |
contributor_str_mv |
Vatavuk, Jan Couto, Antonio Augusto Lima, Nelson Batista de |
dc.subject.por.fl_str_mv |
AISI 17-4 Ph martensita têmpera envelhecimento tenacidade shot peening resistência mecânica aços inoxidáveis aços endurecíveis por precipitação moldes plásticos aços inoxidáveis martensíticos |
topic |
AISI 17-4 Ph martensita têmpera envelhecimento tenacidade shot peening resistência mecânica aços inoxidáveis aços endurecíveis por precipitação moldes plásticos aços inoxidáveis martensíticos 17-4 Ph martensite quenching ageing toughness hardness shot peening CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
dc.subject.eng.fl_str_mv |
17-4 Ph martensite quenching ageing toughness hardness shot peening |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
description |
Martensitic Stainless Steel hás always been used in the injection moulds because of their properties as high polishability and high corrosion resistence that alows it to inject some kind of polymers, such as PVC, because of its resistance to chlorinate gas that the process normally has, and in the injection of acrylic because of its high finishing surface state that the mould needs and, consequently, of the injected product, that are characteristics intrinsics to those materials. Beside the martensitic stainless steel, the stainless aged steel are very used, but, in such applications this steel are not able to suffer the nitriding process, what make its application not so good because there are no ways to increase its surface. In this paper will be studied about aged stainless steel that will pass through the shot peening process and without this process to see how will be the surface result. As there are no literatures about this subject, because besides it is about some old tecnologies, the study shall result in a new application of those techniques making a revolution in the utilization of those materials in some industrial applications as plastic moulds and mechanichal devices. |
publishDate |
2009 |
dc.date.issued.fl_str_mv |
2009-04-24 |
dc.date.available.fl_str_mv |
2010-02-25 2020-05-28T18:07:32Z |
dc.date.accessioned.fl_str_mv |
2016-03-15T19:36:57Z 2020-05-28T18:07:32Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://dspace.mackenzie.br/handle/10899/24201 |
url |
http://dspace.mackenzie.br/handle/10899/24201 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Presbiteriana Mackenzie |
dc.publisher.program.fl_str_mv |
Engenharia de Materiais |
dc.publisher.initials.fl_str_mv |
UPM |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Engenharia de Materiais |
publisher.none.fl_str_mv |
Universidade Presbiteriana Mackenzie |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações do Mackenzie instname:Universidade Presbiteriana Mackenzie (MACKENZIE) instacron:MACKENZIE |
instname_str |
Universidade Presbiteriana Mackenzie (MACKENZIE) |
instacron_str |
MACKENZIE |
institution |
MACKENZIE |
reponame_str |
Biblioteca Digital de Teses e Dissertações do Mackenzie |
collection |
Biblioteca Digital de Teses e Dissertações do Mackenzie |
repository.name.fl_str_mv |
|
repository.mail.fl_str_mv |
|
_version_ |
1757174462334107648 |