Tuning the electronic and structural properties of cerium oxide nanoparticles for the H2 production photocatalytic reaction

Detalhes bibliográficos
Ano de defesa: 2018
Autor(a) principal: Thill, Alisson Steffli
Orientador(a): Bernardi, Fabiano
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: eng
Instituição de defesa: Não Informado pela instituição
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Palavras-chave em Inglês:
UPS
XPS
XAS
DFT
Link de acesso: http://hdl.handle.net/10183/185814
Resumo: The photocatalytic water splitting reaction showed to be a promising process to obtain renewable and clean energy, but the efficiency reached in this process is still low and must be improved to be viable. Considering this, the research on improving the efficiency of photocatalysts has attracted a strong interest in the past last years. Cerium oxide (CeO2−, 0 < x < 0.5) is a material recently investigated as a possible photocatalyst to obtain H2 from H2O. In this work, cerium oxide nanoparticles with high surface area (104 < S < 201 m2/g), high pore volume (32 < V < 132 mm3/g) values, wide range of diameter (2 < d < 90 nm) and O vacancies population (0.05 < x < 0.46) were applied to the H2 production photocatalytic reaction. The nanoparticles presented activity of up to 10 times higher than the commercial cerium oxide standard. UV-Vis, X-ray Diffraction, X-ray Absorption Spectroscopy, X-ray Photoelectron Spectroscopy, Ultraviolet Photoelectron Spectroscopy and Fourier Transform Infrared measurements were performed aiming to elucidate these results and to determine the main structural and electronic properties that can improve the H2 production photocatalytic reaction. It was obtained that the band gap energy depends on the nanoparticle synthesized and can be as low as 2.73 eV. The Ce 4f orbital occupation and the structural disorder presented by the nanoparticles is directly related with the band gap energies obtained. Density Functional Theory (DFT) calculations were performed to obtain the relation between the band structure (DOS) and the O vacancy population in order to explain the dependence of the band gap energy with the Ce 4f orbital occupation. Moreover, the O vacancies population at the surface have a very different effect depending on the presence or absence of mesopores, where a lower O vacancy population at the surface is better (worse) to the photocatalytic activity in the presence (absence) of mesopores. Furthermore O vacancies population at the surface plays a more fundamental role on the photocatalytic activity than the band gap energies for the samples presenting mesopores. The results allowed shedding light on the improvement of the properties of cerium oxide nanoparticles applied to optimize the H2 production photocatalytic activity.
id URGS_e365c155e3edf9837d72e645ebd0cbbe
oai_identifier_str oai:www.lume.ufrgs.br:10183/185814
network_acronym_str URGS
network_name_str Biblioteca Digital de Teses e Dissertações da UFRGS
repository_id_str
spelling Thill, Alisson SteffliBernardi, FabianoTeixeira, Sergio Ribeiro2018-12-01T03:13:37Z2018http://hdl.handle.net/10183/185814001080583The photocatalytic water splitting reaction showed to be a promising process to obtain renewable and clean energy, but the efficiency reached in this process is still low and must be improved to be viable. Considering this, the research on improving the efficiency of photocatalysts has attracted a strong interest in the past last years. Cerium oxide (CeO2−, 0 < x < 0.5) is a material recently investigated as a possible photocatalyst to obtain H2 from H2O. In this work, cerium oxide nanoparticles with high surface area (104 < S < 201 m2/g), high pore volume (32 < V < 132 mm3/g) values, wide range of diameter (2 < d < 90 nm) and O vacancies population (0.05 < x < 0.46) were applied to the H2 production photocatalytic reaction. The nanoparticles presented activity of up to 10 times higher than the commercial cerium oxide standard. UV-Vis, X-ray Diffraction, X-ray Absorption Spectroscopy, X-ray Photoelectron Spectroscopy, Ultraviolet Photoelectron Spectroscopy and Fourier Transform Infrared measurements were performed aiming to elucidate these results and to determine the main structural and electronic properties that can improve the H2 production photocatalytic reaction. It was obtained that the band gap energy depends on the nanoparticle synthesized and can be as low as 2.73 eV. The Ce 4f orbital occupation and the structural disorder presented by the nanoparticles is directly related with the band gap energies obtained. Density Functional Theory (DFT) calculations were performed to obtain the relation between the band structure (DOS) and the O vacancy population in order to explain the dependence of the band gap energy with the Ce 4f orbital occupation. Moreover, the O vacancies population at the surface have a very different effect depending on the presence or absence of mesopores, where a lower O vacancy population at the surface is better (worse) to the photocatalytic activity in the presence (absence) of mesopores. Furthermore O vacancies population at the surface plays a more fundamental role on the photocatalytic activity than the band gap energies for the samples presenting mesopores. The results allowed shedding light on the improvement of the properties of cerium oxide nanoparticles applied to optimize the H2 production photocatalytic activity.application/pdfengNanopartículasProdução de hidrogênioÓxido de cérioTeoria do funcional de densidadeEspectroscopia de absorção de raios-xH2 productionRietveldUV-VisUPSXPSXASDFTCerium oxideTuning the electronic and structural properties of cerium oxide nanoparticles for the H2 production photocatalytic reactionControle das propriedades estruturais e eletrônicas de nanopartículas de óxido de cério para a reação fotocatalítica de produção de H2 info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisUniversidade Federal do Rio Grande do SulInstituto de FísicaPrograma de Pós-Graduação em FísicaPorto Alegre, BR-RS2018mestradoinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UFRGSinstname:Universidade Federal do Rio Grande do Sul (UFRGS)instacron:UFRGSTEXT001080583.pdf.txt001080583.pdf.txtExtracted Texttext/plain233941http://www.lume.ufrgs.br/bitstream/10183/185814/2/001080583.pdf.txtdce924dc46f55ec2c61419a9af805895MD52ORIGINAL001080583.pdfTexto completo (inglês)application/pdf8755638http://www.lume.ufrgs.br/bitstream/10183/185814/1/001080583.pdf0fb475e1e02dd0e5fa96905bbe1b6e30MD5110183/1858142022-11-23 05:46:03.076844oai:www.lume.ufrgs.br:10183/185814Biblioteca Digital de Teses e Dissertaçõeshttps://lume.ufrgs.br/handle/10183/2PUBhttps://lume.ufrgs.br/oai/requestlume@ufrgs.br||lume@ufrgs.bropendoar:18532022-11-23T07:46:03Biblioteca Digital de Teses e Dissertações da UFRGS - Universidade Federal do Rio Grande do Sul (UFRGS)false
dc.title.pt_BR.fl_str_mv Tuning the electronic and structural properties of cerium oxide nanoparticles for the H2 production photocatalytic reaction
dc.title.alternative.pt.fl_str_mv Controle das propriedades estruturais e eletrônicas de nanopartículas de óxido de cério para a reação fotocatalítica de produção de H2
title Tuning the electronic and structural properties of cerium oxide nanoparticles for the H2 production photocatalytic reaction
spellingShingle Tuning the electronic and structural properties of cerium oxide nanoparticles for the H2 production photocatalytic reaction
Thill, Alisson Steffli
Nanopartículas
Produção de hidrogênio
Óxido de cério
Teoria do funcional de densidade
Espectroscopia de absorção de raios-x
H2 production
Rietveld
UV-Vis
UPS
XPS
XAS
DFT
Cerium oxide
title_short Tuning the electronic and structural properties of cerium oxide nanoparticles for the H2 production photocatalytic reaction
title_full Tuning the electronic and structural properties of cerium oxide nanoparticles for the H2 production photocatalytic reaction
title_fullStr Tuning the electronic and structural properties of cerium oxide nanoparticles for the H2 production photocatalytic reaction
title_full_unstemmed Tuning the electronic and structural properties of cerium oxide nanoparticles for the H2 production photocatalytic reaction
title_sort Tuning the electronic and structural properties of cerium oxide nanoparticles for the H2 production photocatalytic reaction
author Thill, Alisson Steffli
author_facet Thill, Alisson Steffli
author_role author
dc.contributor.author.fl_str_mv Thill, Alisson Steffli
dc.contributor.advisor1.fl_str_mv Bernardi, Fabiano
dc.contributor.advisor-co1.fl_str_mv Teixeira, Sergio Ribeiro
contributor_str_mv Bernardi, Fabiano
Teixeira, Sergio Ribeiro
dc.subject.por.fl_str_mv Nanopartículas
Produção de hidrogênio
Óxido de cério
Teoria do funcional de densidade
Espectroscopia de absorção de raios-x
topic Nanopartículas
Produção de hidrogênio
Óxido de cério
Teoria do funcional de densidade
Espectroscopia de absorção de raios-x
H2 production
Rietveld
UV-Vis
UPS
XPS
XAS
DFT
Cerium oxide
dc.subject.eng.fl_str_mv H2 production
Rietveld
UV-Vis
UPS
XPS
XAS
DFT
Cerium oxide
description The photocatalytic water splitting reaction showed to be a promising process to obtain renewable and clean energy, but the efficiency reached in this process is still low and must be improved to be viable. Considering this, the research on improving the efficiency of photocatalysts has attracted a strong interest in the past last years. Cerium oxide (CeO2−, 0 < x < 0.5) is a material recently investigated as a possible photocatalyst to obtain H2 from H2O. In this work, cerium oxide nanoparticles with high surface area (104 < S < 201 m2/g), high pore volume (32 < V < 132 mm3/g) values, wide range of diameter (2 < d < 90 nm) and O vacancies population (0.05 < x < 0.46) were applied to the H2 production photocatalytic reaction. The nanoparticles presented activity of up to 10 times higher than the commercial cerium oxide standard. UV-Vis, X-ray Diffraction, X-ray Absorption Spectroscopy, X-ray Photoelectron Spectroscopy, Ultraviolet Photoelectron Spectroscopy and Fourier Transform Infrared measurements were performed aiming to elucidate these results and to determine the main structural and electronic properties that can improve the H2 production photocatalytic reaction. It was obtained that the band gap energy depends on the nanoparticle synthesized and can be as low as 2.73 eV. The Ce 4f orbital occupation and the structural disorder presented by the nanoparticles is directly related with the band gap energies obtained. Density Functional Theory (DFT) calculations were performed to obtain the relation between the band structure (DOS) and the O vacancy population in order to explain the dependence of the band gap energy with the Ce 4f orbital occupation. Moreover, the O vacancies population at the surface have a very different effect depending on the presence or absence of mesopores, where a lower O vacancy population at the surface is better (worse) to the photocatalytic activity in the presence (absence) of mesopores. Furthermore O vacancies population at the surface plays a more fundamental role on the photocatalytic activity than the band gap energies for the samples presenting mesopores. The results allowed shedding light on the improvement of the properties of cerium oxide nanoparticles applied to optimize the H2 production photocatalytic activity.
publishDate 2018
dc.date.accessioned.fl_str_mv 2018-12-01T03:13:37Z
dc.date.issued.fl_str_mv 2018
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/10183/185814
dc.identifier.nrb.pt_BR.fl_str_mv 001080583
url http://hdl.handle.net/10183/185814
identifier_str_mv 001080583
dc.language.iso.fl_str_mv eng
language eng
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:Biblioteca Digital de Teses e Dissertações da UFRGS
instname:Universidade Federal do Rio Grande do Sul (UFRGS)
instacron:UFRGS
instname_str Universidade Federal do Rio Grande do Sul (UFRGS)
instacron_str UFRGS
institution UFRGS
reponame_str Biblioteca Digital de Teses e Dissertações da UFRGS
collection Biblioteca Digital de Teses e Dissertações da UFRGS
bitstream.url.fl_str_mv http://www.lume.ufrgs.br/bitstream/10183/185814/2/001080583.pdf.txt
http://www.lume.ufrgs.br/bitstream/10183/185814/1/001080583.pdf
bitstream.checksum.fl_str_mv dce924dc46f55ec2c61419a9af805895
0fb475e1e02dd0e5fa96905bbe1b6e30
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
repository.name.fl_str_mv Biblioteca Digital de Teses e Dissertações da UFRGS - Universidade Federal do Rio Grande do Sul (UFRGS)
repository.mail.fl_str_mv lume@ufrgs.br||lume@ufrgs.br
_version_ 1797065113376653312