Confinamento de nanopartículas de ZrO2 e Cu em nanotubos de carbono para hidrogenação de CO2 em metanol

Detalhes bibliográficos
Ano de defesa: 2024
Autor(a) principal: Iwasaki, Mariana Tiemi
Orientador(a): Bueno, José Maria Corrêa lattes
Banca de defesa: Não Informado pela instituição
Tipo de documento: Tese
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal de São Carlos
Campus São Carlos
Programa de Pós-Graduação: Programa de Pós-Graduação em Engenharia Química - PPGEQ
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
CNT
Palavras-chave em Inglês:
Área do conhecimento CNPq:
Link de acesso: https://repositorio.ufscar.br/handle/20.500.14289/20458
Resumo: The CO2 hydrogenation reaction is a promising reaction because it enables the reduction of CO2 in the atmosphere and the utilization of H2 from renewable sources to produce useful chemical products for society. However, it is necessary to develop catalysts that are active, stable and selective to the desired product. Therefore, in this work, copper and zirconia catalysts supported on carbon nanotubes (CNT) were developed and their catalytic activity in the CO2 hydrogenation reaction to methanol was verified. The CNT catalysts were prepared by incipient impregnation and characterized by thermogravimetric analysis (TGA), RAMAN spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDX), temperature programmed reduction in hydrogen (H2-TPR) and N2 physisorption. Catalytic tests were carried out in a fixed bed reactor, with catalyst reduction at 1 bar and 300°C in H2 for 1 hour, followed by the CO2 hydrogenation reaction at 30 bar and 250°C with a mixture of 3H2:1CO2 for 10 hours. TEM images showed metallic oxide particles of CuO and/or ZrO2 with size 1-10 nm dispersed inside the CNTs. In the catalytic tests, the 10Cu/CNT catalyst showed low CO2 conversion (~5%) and high CO selectivity (~70%), indicating that methanol is produced by the reverse water gas shift reaction and CO hydrogenation pathway. The Cu/Zr, Cu/Zr/CNT and Zr/Cu/CNT catalysts are highly selective to methanol (~85%), indicating that ZrO2 and the Cu-O-Zr interface are important active sites for methanol production. The Cu/Zr/CNT, Zr/Cu/CNT and Cu/Zr catalysts showed a period of instability in methanol selectivity of 4 h, corresponding to a transient state in which a structural change is occurring in the catalyst during the reaction at 30 bar and 250ºC, that makes them more selective to methanol. The Zr/Cu/CNT catalyst can be reused, but it takes around 6 hours to stabilize the methanol selectivity. In the catalytic stability test, the Zr/Cu/CNT catalyst remained stable during the 54.5 h reaction, ending the reaction with a CO2 conversion of 30% and methanol selectivity of 89%. Therefore, the Zr/Cu/CNT catalyst is active, stable and methanol selective.
id SCAR_1af55d795e84c88bb054ab1e4bb27e40
oai_identifier_str oai:repositorio.ufscar.br:20.500.14289/20458
network_acronym_str SCAR
network_name_str Repositório Institucional da UFSCAR
repository_id_str
spelling Iwasaki, Mariana TiemiBueno, José Maria Corrêahttps://lattes.cnpq.br/0157452280626031https://lattes.cnpq.br/1600626733759940https://orcid.org/0000-0001-9999-38122024-09-03T11:45:53Z2024-09-03T11:45:53Z2024-05-29IWASAKI, Mariana Tiemi. Confinamento de nanopartículas de ZrO2 e Cu em nanotubos de carbono para hidrogenação de CO2 em metanol. 2024. Tese (Doutorado em Engenharia Química) – Universidade Federal de São Carlos, São Carlos, 2024. Disponível em: https://repositorio.ufscar.br/handle/20.500.14289/20458.https://repositorio.ufscar.br/handle/20.500.14289/20458The CO2 hydrogenation reaction is a promising reaction because it enables the reduction of CO2 in the atmosphere and the utilization of H2 from renewable sources to produce useful chemical products for society. However, it is necessary to develop catalysts that are active, stable and selective to the desired product. Therefore, in this work, copper and zirconia catalysts supported on carbon nanotubes (CNT) were developed and their catalytic activity in the CO2 hydrogenation reaction to methanol was verified. The CNT catalysts were prepared by incipient impregnation and characterized by thermogravimetric analysis (TGA), RAMAN spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDX), temperature programmed reduction in hydrogen (H2-TPR) and N2 physisorption. Catalytic tests were carried out in a fixed bed reactor, with catalyst reduction at 1 bar and 300°C in H2 for 1 hour, followed by the CO2 hydrogenation reaction at 30 bar and 250°C with a mixture of 3H2:1CO2 for 10 hours. TEM images showed metallic oxide particles of CuO and/or ZrO2 with size 1-10 nm dispersed inside the CNTs. In the catalytic tests, the 10Cu/CNT catalyst showed low CO2 conversion (~5%) and high CO selectivity (~70%), indicating that methanol is produced by the reverse water gas shift reaction and CO hydrogenation pathway. The Cu/Zr, Cu/Zr/CNT and Zr/Cu/CNT catalysts are highly selective to methanol (~85%), indicating that ZrO2 and the Cu-O-Zr interface are important active sites for methanol production. The Cu/Zr/CNT, Zr/Cu/CNT and Cu/Zr catalysts showed a period of instability in methanol selectivity of 4 h, corresponding to a transient state in which a structural change is occurring in the catalyst during the reaction at 30 bar and 250ºC, that makes them more selective to methanol. The Zr/Cu/CNT catalyst can be reused, but it takes around 6 hours to stabilize the methanol selectivity. In the catalytic stability test, the Zr/Cu/CNT catalyst remained stable during the 54.5 h reaction, ending the reaction with a CO2 conversion of 30% and methanol selectivity of 89%. Therefore, the Zr/Cu/CNT catalyst is active, stable and methanol selective.A reação de hidrogenação do CO2 é uma reação promissora, pois possibilita reduzir o CO2 da atmosfera e utilizar o H2 de fontes renováveis para produzir produtos químicos uteis para a sociedade. Contudo é necessário o desenvolvimento de catalisadores ativos, estáveis e seletivos ao produto desejado. Por isso, neste trabalho foram desenvolvidos catalisadores de cobre e zircônia suportados em nanotubos de carbono (CNT) e verificado a sua atividade catalítica na reação de hidrogenação do CO2 a metanol. Os catalisadores com CNT foram preparados por impregnação incipiente e caracterizados por análise termogravimétrica (TGA), espectroscopia RAMAN, difratometria de raios X (DRX), microscopia eletrônica de transmissão (MET), espectroscopia por dispersão de elétrons (EDS), redução a temperatura programada em hidrogênio (TPR-H2) e fisissorção do N2. Os testes catalíticos foram realizados em um reator de leito fixo com redução do catalisador a 1 bar e 300°C em H2 por 1 hora, seguido da reação de hidrogenação do CO2 a 30 bar e 250°C com uma mistura de 3H2:1CO2 por 10 horas. Por meio das imagens de MET, foi possível observar as partículas dos óxidos metálicos de CuO e/ou ZrO2 de tamanho de 1-10 nm dispersas dentro dos CNTs. Nos testes catalíticos, o catalisador de 10Cu/CNT apresentou uma baixa conversão do CO2 (~5%), e elevada seletividade ao CO (~70%), indicando que o metanol é produzido pela rota da reação de deslocamento reversível de água-gás e hidrogenação do CO. Os catalisadores de Cu/Zr, Cu/Zr/CNT e Zr/Cu/CNT são mais seletivos ao metanol (~85%), indicando que a ZrO2 e a interface Cu-O-Zr são sítios ativos importantes para a produção do metanol. Os catalisadores de Cu/Zr/CNT, Zr/Cu/CNT e Cu/Zr apresentaram um período de instabilidade na seletividade do metanol de 4 h, que se trata de um estado transiente, em que está ocorrendo uma alteração estrutural no catalisador durante a reação à 30 bar e 250ºC, que os torna mais seletivos a metanol. O catalisador Zr/Cu/CNT pode ser reutilizado, mas demora em torno de 6 h para estabilizar a seletividade do metanol. No teste catalítico de estabilidade, o catalisador Zr/Cu/CNT se manteve estável durante as 54,5 h de reação, finalizando a reação com conversão do CO2 de 30% e seletividade do metanol de 89%. Portanto, o catalisador de Zr/Cu/CNT é ativo, estável e seletivo a metanol.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)Processo n° 88887.508443/2020-00, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)porUniversidade Federal de São CarlosCampus São CarlosPrograma de Pós-Graduação em Engenharia Química - PPGEQUFSCarAttribution-NonCommercial-NoDerivs 3.0 Brazilhttp://creativecommons.org/licenses/by-nc-nd/3.0/br/info:eu-repo/semantics/openAccessHidrogenação do CO2MetanolCNTCobreZircôniaCO2 hydrogenationMethanolCopperZirconiaENGENHARIAS::ENGENHARIA QUIMICAConfinamento de nanopartículas de ZrO2 e Cu em nanotubos de carbono para hidrogenação de CO2 em metanolConfinement of ZrO2 and Cu nanoparticles into carbon nanotubes for hydrogenation of CO2 to methanolinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisreponame:Repositório Institucional da UFSCARinstname:Universidade Federal de São Carlos (UFSCAR)instacron:UFSCARTEXTTese de doutorado - versão final_ Mariana Tiemi Iwasaki.pdf.txtWritten by FormatFilter org.dspace.app.mediafilter.TikaTextExtractionFilter on 2025-02-03T20:37:29Z (GMT).Extracted texttext/plain102974https://repositorio.ufscar.br/bitstreams/1266b397-086c-4d23-97eb-abc0b809bff0/download46f9e71d09b023788c1f4311e59bed0bMD53falseAnonymousREADTHUMBNAILTese de doutorado - versão final_ Mariana Tiemi Iwasaki.pdf.jpgWritten by FormatFilter org.dspace.app.mediafilter.PDFBoxThumbnail on 2025-02-03T20:37:29Z (GMT).Generated Thumbnailimage/jpeg3920https://repositorio.ufscar.br/bitstreams/f998747a-d826-4985-8e02-db3154318a72/downloadb1c94f1a66b036a2e4e117d1164aa3e9MD54falseAnonymousREADORIGINALTese de doutorado - versão final_ Mariana Tiemi Iwasaki.pdfTese de doutorado - versão final_ Mariana Tiemi Iwasaki.pdfTese finalapplication/pdf5235390https://repositorio.ufscar.br/bitstreams/19dadf8d-dad9-4afc-9e03-806f7fecbfdf/downloada691e80aefa9cb4d7b81dbf549ed83ceMD51trueAnonymousREADCC-LICENSElicense_rdforg.dspace.license.CreativeCommonsapplication/rdf+xml; charset=utf-8810https://repositorio.ufscar.br/bitstreams/56974028-5fd2-459a-9c16-08e707ded3b7/downloadf337d95da1fce0a22c77480e5e9a7aecMD52falseAnonymousREAD20.500.14289/204582026-07-18T00:19:32.834259Zhttp://creativecommons.org/licenses/by-nc-nd/3.0/br/Attribution-NonCommercial-NoDerivs 3.0 Brazilopen.accessoai:repositorio.ufscar.br:20.500.14289/20458https://repositorio.ufscar.brRepositório InstitucionalPUBhttps://repositorio.ufscar.br/oai/requestrepositorio.sibi@ufscar.bropendoar:43222026-07-18T00:19:32Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR)false
dc.title.por.fl_str_mv Confinamento de nanopartículas de ZrO2 e Cu em nanotubos de carbono para hidrogenação de CO2 em metanol
dc.title.alternative.eng.fl_str_mv Confinement of ZrO2 and Cu nanoparticles into carbon nanotubes for hydrogenation of CO2 to methanol
title Confinamento de nanopartículas de ZrO2 e Cu em nanotubos de carbono para hidrogenação de CO2 em metanol
spellingShingle Confinamento de nanopartículas de ZrO2 e Cu em nanotubos de carbono para hidrogenação de CO2 em metanol
Iwasaki, Mariana Tiemi
Hidrogenação do CO2
Metanol
CNT
Cobre
Zircônia
CO2 hydrogenation
Methanol
Copper
Zirconia
ENGENHARIAS::ENGENHARIA QUIMICA
title_short Confinamento de nanopartículas de ZrO2 e Cu em nanotubos de carbono para hidrogenação de CO2 em metanol
title_full Confinamento de nanopartículas de ZrO2 e Cu em nanotubos de carbono para hidrogenação de CO2 em metanol
title_fullStr Confinamento de nanopartículas de ZrO2 e Cu em nanotubos de carbono para hidrogenação de CO2 em metanol
title_full_unstemmed Confinamento de nanopartículas de ZrO2 e Cu em nanotubos de carbono para hidrogenação de CO2 em metanol
title_sort Confinamento de nanopartículas de ZrO2 e Cu em nanotubos de carbono para hidrogenação de CO2 em metanol
author Iwasaki, Mariana Tiemi
author_facet Iwasaki, Mariana Tiemi
author_role author
dc.contributor.authorlattes.por.fl_str_mv https://lattes.cnpq.br/1600626733759940
dc.contributor.authororcid.por.fl_str_mv https://orcid.org/0000-0001-9999-3812
dc.contributor.author.fl_str_mv Iwasaki, Mariana Tiemi
dc.contributor.advisor1.fl_str_mv Bueno, José Maria Corrêa
dc.contributor.advisor1Lattes.fl_str_mv https://lattes.cnpq.br/0157452280626031
contributor_str_mv Bueno, José Maria Corrêa
dc.subject.por.fl_str_mv Hidrogenação do CO2
Metanol
CNT
Cobre
Zircônia
topic Hidrogenação do CO2
Metanol
CNT
Cobre
Zircônia
CO2 hydrogenation
Methanol
Copper
Zirconia
ENGENHARIAS::ENGENHARIA QUIMICA
dc.subject.eng.fl_str_mv CO2 hydrogenation
Methanol
Copper
Zirconia
dc.subject.cnpq.fl_str_mv ENGENHARIAS::ENGENHARIA QUIMICA
description The CO2 hydrogenation reaction is a promising reaction because it enables the reduction of CO2 in the atmosphere and the utilization of H2 from renewable sources to produce useful chemical products for society. However, it is necessary to develop catalysts that are active, stable and selective to the desired product. Therefore, in this work, copper and zirconia catalysts supported on carbon nanotubes (CNT) were developed and their catalytic activity in the CO2 hydrogenation reaction to methanol was verified. The CNT catalysts were prepared by incipient impregnation and characterized by thermogravimetric analysis (TGA), RAMAN spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDX), temperature programmed reduction in hydrogen (H2-TPR) and N2 physisorption. Catalytic tests were carried out in a fixed bed reactor, with catalyst reduction at 1 bar and 300°C in H2 for 1 hour, followed by the CO2 hydrogenation reaction at 30 bar and 250°C with a mixture of 3H2:1CO2 for 10 hours. TEM images showed metallic oxide particles of CuO and/or ZrO2 with size 1-10 nm dispersed inside the CNTs. In the catalytic tests, the 10Cu/CNT catalyst showed low CO2 conversion (~5%) and high CO selectivity (~70%), indicating that methanol is produced by the reverse water gas shift reaction and CO hydrogenation pathway. The Cu/Zr, Cu/Zr/CNT and Zr/Cu/CNT catalysts are highly selective to methanol (~85%), indicating that ZrO2 and the Cu-O-Zr interface are important active sites for methanol production. The Cu/Zr/CNT, Zr/Cu/CNT and Cu/Zr catalysts showed a period of instability in methanol selectivity of 4 h, corresponding to a transient state in which a structural change is occurring in the catalyst during the reaction at 30 bar and 250ºC, that makes them more selective to methanol. The Zr/Cu/CNT catalyst can be reused, but it takes around 6 hours to stabilize the methanol selectivity. In the catalytic stability test, the Zr/Cu/CNT catalyst remained stable during the 54.5 h reaction, ending the reaction with a CO2 conversion of 30% and methanol selectivity of 89%. Therefore, the Zr/Cu/CNT catalyst is active, stable and methanol selective.
publishDate 2024
dc.date.accessioned.fl_str_mv 2024-09-03T11:45:53Z
dc.date.available.fl_str_mv 2024-09-03T11:45:53Z
dc.date.issued.fl_str_mv 2024-05-29
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/doctoralThesis
format doctoralThesis
status_str publishedVersion
dc.identifier.citation.fl_str_mv IWASAKI, Mariana Tiemi. Confinamento de nanopartículas de ZrO2 e Cu em nanotubos de carbono para hidrogenação de CO2 em metanol. 2024. Tese (Doutorado em Engenharia Química) – Universidade Federal de São Carlos, São Carlos, 2024. Disponível em: https://repositorio.ufscar.br/handle/20.500.14289/20458.
dc.identifier.uri.fl_str_mv https://repositorio.ufscar.br/handle/20.500.14289/20458
identifier_str_mv IWASAKI, Mariana Tiemi. Confinamento de nanopartículas de ZrO2 e Cu em nanotubos de carbono para hidrogenação de CO2 em metanol. 2024. Tese (Doutorado em Engenharia Química) – Universidade Federal de São Carlos, São Carlos, 2024. Disponível em: https://repositorio.ufscar.br/handle/20.500.14289/20458.
url https://repositorio.ufscar.br/handle/20.500.14289/20458
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv Attribution-NonCommercial-NoDerivs 3.0 Brazil
http://creativecommons.org/licenses/by-nc-nd/3.0/br/
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Attribution-NonCommercial-NoDerivs 3.0 Brazil
http://creativecommons.org/licenses/by-nc-nd/3.0/br/
eu_rights_str_mv openAccess
dc.publisher.none.fl_str_mv Universidade Federal de São Carlos
Campus São Carlos
dc.publisher.program.fl_str_mv Programa de Pós-Graduação em Engenharia Química - PPGEQ
dc.publisher.initials.fl_str_mv UFSCar
publisher.none.fl_str_mv Universidade Federal de São Carlos
Campus São Carlos
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFSCAR
instname:Universidade Federal de São Carlos (UFSCAR)
instacron:UFSCAR
instname_str Universidade Federal de São Carlos (UFSCAR)
instacron_str UFSCAR
institution UFSCAR
reponame_str Repositório Institucional da UFSCAR
collection Repositório Institucional da UFSCAR
bitstream.url.fl_str_mv https://repositorio.ufscar.br/bitstreams/1266b397-086c-4d23-97eb-abc0b809bff0/download
https://repositorio.ufscar.br/bitstreams/f998747a-d826-4985-8e02-db3154318a72/download
https://repositorio.ufscar.br/bitstreams/19dadf8d-dad9-4afc-9e03-806f7fecbfdf/download
https://repositorio.ufscar.br/bitstreams/56974028-5fd2-459a-9c16-08e707ded3b7/download
bitstream.checksum.fl_str_mv 46f9e71d09b023788c1f4311e59bed0b
b1c94f1a66b036a2e4e117d1164aa3e9
a691e80aefa9cb4d7b81dbf549ed83ce
f337d95da1fce0a22c77480e5e9a7aec
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
MD5
MD5
repository.name.fl_str_mv Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR)
repository.mail.fl_str_mv repositorio.sibi@ufscar.br
_version_ 1881659766022864896