Estudo da compressibilidade de tortas de filtração de gases em filtros de tecido

• Ano de defesa: 2010
• Autor(a) principal: Fargnoli, Amélia Giovana
• Orientador(a): Aguiar, Mônica Lopes
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso aberto
• Idioma: por
• Instituição de defesa: Universidade Federal de São Carlos
• Programa de Pós-Graduação: Programa de Pós-Graduação em Engenharia Química - PPGEQ
• País: BR
• Palavras-chave em Português: Filtração de gases; Porosidade; Filtros de manga; Compressibilidade; Velocidade superficial de filtração
• Palavras-chave em Inglês: Gas filtration; Fabric filters; Gas filtration cakes; Porosity; Compressibility; Superficial filtration velocity
• Área do conhecimento CNPq: ENGENHARIAS::ENGENHARIA QUIMICA
• Link de acesso: https://repositorio.ufscar.br/handle/20.500.14289/4072

A study on the compressibility of gas filtration cakes through their porosity investigation is presented in this work. The experimental unit consisted of a circular filter with a filtration area of 249 cm2 and a data acquisition system; mass flow rate and relative air humidity were controlled. The filter media used were a polyester felt (weighing 600 g/cm2) and an acrylic felt (weighing 550 g/cm2). A phosphate concentrate phosphate (ρp = 3.20 g/cm3 and dSt = 5.6 μm) and a magnesium silicate (talc) (ρp = 3.09 g/cm3 and dSt = 2.5 μm) were used as powder materials. Superficial filtration velocity was kept constant at 10 cm/s during phosphate concentrate filtration trials and five maximum pressure drops were set (100, 300, 600, 900 and 1200 mmH2O) at constant mass flow rate. Superficial filtration velocity was kept constant at 10 cm/s during talc filtration trials and four maximum pressure drops were set (300, 600, 900 and 1200 mmH2O) at constant mass flow rate. Trials at different filtration velocities (7.5 cm/s, 10 cm/s, 12.5 cm/s and 15.0 cm/s) were also performed. Initially, porosity data as a function of pressure drop per time were obtained. Each cake underwent a process to acquire the necessary resistance to be cut and embedded and then analyzed by a Scanning Electron Microscope. The obtained images were treated and analyzed in an image analyzing software which provided cakes porosity values. Afterwards, the influence of gas superficial velocity on average porosity was evaluated for cakes formed by talc powder. The porosity values obtained with the SEM images were compared to those obtained with equations found in the literature. A difference of 20 to 48% between experimental average porosity and estimated porosity was found for the phosphate concentrate cakes and of less than 13% for the talc cakes obtained at constant velocity. The average porosity values found for talc cakes were higher than those found for phosphate concentrate cakes, which was probably due to the fact that talc particles shape is extremely different from the spherical shape. A compressibility behavior for cakes of the two materials was possible to be observed. Talc cake porosity decreased with the increase of superficial filtration velocity.