Fabricação de implantes intraorbitais via processamento digital de luz (DLP)

• Ano de defesa: 2025
• Autor(a) principal: Almeida, Ycaro Breno Alves de
• Orientador(a): Crovace , Murilo Camuri
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso aberto
• Idioma: por
• Instituição de defesa: Universidade Federal de São Carlos; Câmpus São Carlos
• Programa de Pós-Graduação: Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM
• Palavras-chave em Português: Implante intraorbital; Biosilicato; Manufatura aditiva; Fotopolimerização em cuba; Processamento digital de luz
• Palavras-chave em Inglês: Intraorbital implant; Biosilicate; Additive manufacturing; Vat photopolymerization; Digital light processing
• Área do conhecimento CNPq: ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA
• Link de acesso: https://hdl.handle.net/20.500.14289/22805

Several clinical situations require surgeries that reduce the volume of the orbital cavity, making it necessary to replace this volume to preserve the patient's aesthetics. There is still no consensus on the ideal material for this. A promising alternative is the Biosilicate implant, already clinically tested. However, its fabrication by melt-solidification limits the creation of complex shapes. In this context, the digital light process (DLP) emerges as a ceramic additive manufacturing technique that offers high surface quality and dimensional accuracy. Therefore, the objective of this study was to manufacture, in a novel way, intraorbital implants based on Biosilicate using the DLP technique. Biosilicate was successfully obtained and characterized using differential scanning calorimetry (DSC) and X-ray fluorescence (XRF) analysis. The effects of milling with and without solvent were demonstrated through dilatometric analyses. Sintering can be performed at 950°C without significant foaming, preserving the integrity of the printed structure. With the Biosilicate in hand, the suspension was prepared for DLP printing, aiming for high solids concentration and good stability. Rheological studies with different solids (30, 40, and 50% vol) and dispersant (0.1–5% vol) contents indicated that the formulation with 40% solids and 5% dispersant, although presenting a viscosity slightly above the ideal value, was considered suitable and chosen for printing the intraorbital implants. The implants were successfully printed, resulting in defect-free, gyroid-like parts after the thermal debinding and sintering processes. In vitro bioactivity tests in simulated body fluid (SBF) showed the formation of hydroxycarbonate apatite (HCA) after only 6 hours of immersion.