Avaliação do envelhecimento artificial em propriedades físicas de resina nanocerâmica obtida por impressão tridimensional
| Ano de defesa: | 2026 |
|---|---|
| Autor(a) principal: | |
| Orientador(a): | |
| Banca de defesa: | |
| Tipo de documento: | Dissertação |
| Tipo de acesso: | Acesso embargado |
| Idioma: | por |
| Instituição de defesa: |
Não Informado pela instituição
|
| Programa de Pós-Graduação: |
Não Informado pela instituição
|
| Departamento: |
Não Informado pela instituição
|
| País: |
Não Informado pela instituição
|
| Área do conhecimento CNPq: | |
| Link de acesso: | http://repositorio.ufc.br/handle/riufc/88337 |
Resumo: | 3D-printed nanoceramic resins have been indicated for definitive fixed prostheses, but data are lacking on the influence of surface finishing on the stability of their physical properties over time. The aim of this in vitro study was to evaluate the influence of mechanical polishing and extrinsic characterization with pigment and glaze on the physical properties of a 3D-printed nanoceramic resin subjected to artificial aging interventions. Sixty-four disks (15 × 2 mm; Voxelprint Ceramic; FGM Dental Group, Joinville, Brazil) were divided between the two protocols and allocated to four interventions (n = 8): simulated toothbrushing (16,000 and 32,000 cycles), thermal cycling (1,200 and 2,400 cycles), both corresponding to 1 and 2 years, pH cycling (28 days), and storage in distilled water (control). Color (ΔE00) and translucency (TP00) were calculated using the CIEDE2000 formula, gloss by 60-degree glossimetry, roughness (Ra) by contact profilometry, and sorption and solubility according to ISO 4049:2019, applying ANOVA (three factors for color, two for the other outcomes) and nonparametric tests (α = 0.05). Color was influenced by finishing (p = 0.009), time (p < 0.001), and aging (p = 0.031), with a difference between protocols only under thermal cycling in the first year (p = 0.010), and the acceptability threshold was exceeded only in the second year, by GM under thermal cycling, by GP under pH cycling, and by both under water storage, but by neither under simulated toothbrushing. GP was more translucent than GM from baseline (p < 0.001) and reduced TP00 in all four interventions (p < 0.001), whereas GM did not vary in any of them (p ≥ 0.092). Gloss decreased over time in all four interventions (p ≤ 0.022), and the initial advantage of GM under simulated toothbrushing and pH cycling (p ≤ 0.003) was not maintained (p ≥ 0.053). GM was rougher than GP from baseline and at all time points (p ≤ 0.001), with an increase in Ra in all four interventions (p ≤ 0.028), and sorption and solubility remained below the ISO 4049:2019 limits. The type of finishing differentiated color behavior only under thermal cycling in the first year, GP maintained a smoother surface under all conditions, and extrinsic characterization preserved translucency, but showed roughness above the clinical acceptability threshold and did not maintain the initial gloss, so neither protocol was superior across all outcomes. |
| id |
UFC-7_bdfaccc76a4683ed9d79caa02199ab6a |
|---|---|
| oai_identifier_str |
oai:repositorio.ufc.br:riufc/88337 |
| network_acronym_str |
UFC-7 |
| network_name_str |
Repositório Institucional da Universidade Federal do Ceará (UFC) |
| repository_id_str |
|
| spelling |
Porto, Amanda de Menezeshttp://lattes.cnpq.br/0326066358340927https://orcid.org/0000-0001-7071-5886http://lattes.cnpq.br/5524708607165176http://orcid.org/0009-0002-5787-0106Pontes, Karina Matthes de Freitas2026-10-20T18:04:01Z2026-10-20T18:04:01Z2026PORTO, Amanda de Menezes. Avaliação do envelhecimento artificial em propriedades físicas de resina nanocerâmica obtida por impressão tridimensional. 2026. 62 f. Dissertação (Mestrado em Odontologia) - Faculdade de Farmácia, Odontologia e Enfermagem, Universidade Federal do Ceará, Fortaleza, 2026. Disponível em: http://repositorio.ufc.br/handle/riufc/88337. Acesso em: 20 out. 2026.http://repositorio.ufc.br/handle/riufc/883373D-printed nanoceramic resins have been indicated for definitive fixed prostheses, but data are lacking on the influence of surface finishing on the stability of their physical properties over time. The aim of this in vitro study was to evaluate the influence of mechanical polishing and extrinsic characterization with pigment and glaze on the physical properties of a 3D-printed nanoceramic resin subjected to artificial aging interventions. Sixty-four disks (15 × 2 mm; Voxelprint Ceramic; FGM Dental Group, Joinville, Brazil) were divided between the two protocols and allocated to four interventions (n = 8): simulated toothbrushing (16,000 and 32,000 cycles), thermal cycling (1,200 and 2,400 cycles), both corresponding to 1 and 2 years, pH cycling (28 days), and storage in distilled water (control). Color (ΔE00) and translucency (TP00) were calculated using the CIEDE2000 formula, gloss by 60-degree glossimetry, roughness (Ra) by contact profilometry, and sorption and solubility according to ISO 4049:2019, applying ANOVA (three factors for color, two for the other outcomes) and nonparametric tests (α = 0.05). Color was influenced by finishing (p = 0.009), time (p < 0.001), and aging (p = 0.031), with a difference between protocols only under thermal cycling in the first year (p = 0.010), and the acceptability threshold was exceeded only in the second year, by GM under thermal cycling, by GP under pH cycling, and by both under water storage, but by neither under simulated toothbrushing. GP was more translucent than GM from baseline (p < 0.001) and reduced TP00 in all four interventions (p < 0.001), whereas GM did not vary in any of them (p ≥ 0.092). Gloss decreased over time in all four interventions (p ≤ 0.022), and the initial advantage of GM under simulated toothbrushing and pH cycling (p ≤ 0.003) was not maintained (p ≥ 0.053). GM was rougher than GP from baseline and at all time points (p ≤ 0.001), with an increase in Ra in all four interventions (p ≤ 0.028), and sorption and solubility remained below the ISO 4049:2019 limits. The type of finishing differentiated color behavior only under thermal cycling in the first year, GP maintained a smoother surface under all conditions, and extrinsic characterization preserved translucency, but showed roughness above the clinical acceptability threshold and did not maintain the initial gloss, so neither protocol was superior across all outcomes.Resinas nanocerâmicas impressas em 3D têm sido indicadas para próteses fixas definitivas, mas faltam dados sobre a influência do acabamento na estabilidade de suas propriedades físicas ao longo do tempo. O objetivo deste estudo in vitro foi avaliar a influência do polimento mecânico e da caracterização extrínseca com pigmento e glaze sobre as propriedades físicas de uma resina nanocerâmica impressa em 3D submetida a intervenções de envelhecimento artificial. Sessenta e quatro discos (15 × 2 mm; Voxelprint Ceramic; FGM Dental Group, Joinville, Brasil) foram divididos entre os dois protocolos e alocados em quatro intervenções (n = 8): escovação simulada (16.000 e 32.000 ciclos), ciclagem térmica (1.200 e 2.400 ciclos), ambas correspondentes a 1 e 2 anos, ciclagem de pH (28 dias) e armazenamento em água destilada (controle). Cor (ΔE00) e translucidez (TP00) foram calculadas pela fórmula CIEDE2000, o brilho por glossimetria de 60 graus, a rugosidade (Ra) por perfilometria de contato e a sorção e a solubilidade conforme a ISO 4049:2019, aplicando-se ANOVA (três fatores para cor, dois para os demais desfechos) e testes não paramétricos (α = 0,05). A cor foi influenciada pelo acabamento (p = 0,009), pelo tempo (p < 0,001) e pelo envelhecimento (p = 0,031), com diferença entre protocolos apenas sob ciclagem térmica no primeiro ano (p = 0,010), e o limiar de aceitabilidade foi ultrapassado somente no segundo ano, pelo GM sob ciclagem térmica, pelo GP sob ciclagem de pH e por ambos no armazenamento em água, mas por nenhum deles sob escovação simulada. O GP foi mais translúcido que o GM desde o baseline (p < 0,001) e reduziu o TP00 nas quatro intervenções (p < 0,001), enquanto o GM não variou em nenhuma delas (p ≥ 0,092). O brilho diminuiu com o tempo nas quatro intervenções (p ≤ 0,022) e a vantagem inicial do GM sob escovação simulada e ciclagem de pH (p ≤ 0,003) não se manteve (p ≥ 0,053). O GM foi mais rugoso que o GP desde o baseline e em todos os tempos (p ≤ 0,001), com aumento da Ra nas quatro intervenções (p ≤ 0,028), e a sorção e a solubilidade ficaram abaixo dos limites da ISO 4049:2019. O tipo de acabamento diferenciou o comportamento de cor apenas sob ciclagem térmica no primeiro ano, o GP manteve a superfície mais lisa em todas as condições e a caracterização extrínseca preservou a translucidez, mas apresentou rugosidade acima do limiar de aceitabilidade clínica e não manteve o brilho inicial, de modo que nenhum protocolo foi superior em todos os desfechos.Avaliação do envelhecimento artificial em propriedades físicas de resina nanocerâmica obtida por impressão tridimensionalinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisImpressão TridimensionalPolimento DentárioEstética DentáriaPrinting, Three-DimensionalDental PolishingEsthetics, DentalCNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOSinfo:eu-repo/semantics/embargoedAccessporreponame:Repositório Institucional da Universidade Federal do Ceará (UFC)instname:Universidade Federal do Ceará (UFC)instacron:UFC2028-10-19ORIGINAL2026_dis_amporto.pdf2026_dis_amporto.pdfapplication/pdf1677465http://repositorio.ufc.br/bitstream/riufc/88337/2/2026_dis_amporto.pdf4c688f03ce4dd64e4ebf7b4b40a2568fMD52LICENSElicense.txtlicense.txttext/plain; charset=utf-81748http://repositorio.ufc.br/bitstream/riufc/88337/3/license.txt8a4605be74aa9ea9d79846c1fba20a33MD53riufc/883372026-10-20 15:04:54.179oai:repositorio.ufc.br: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Repositório InstitucionalPUBhttp://www.repositorio.ufc.br/ri-oai/requestbu@ufc.br || repositorio@ufc.bropendoar:2026-10-20T18:04:54Repositório Institucional da Universidade Federal do Ceará (UFC) - Universidade Federal do Ceará (UFC)false |
| dc.title.pt_BR.fl_str_mv |
Avaliação do envelhecimento artificial em propriedades físicas de resina nanocerâmica obtida por impressão tridimensional |
| title |
Avaliação do envelhecimento artificial em propriedades físicas de resina nanocerâmica obtida por impressão tridimensional |
| spellingShingle |
Avaliação do envelhecimento artificial em propriedades físicas de resina nanocerâmica obtida por impressão tridimensional Porto, Amanda de Menezes CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOS Impressão Tridimensional Polimento Dentário Estética Dentária Printing, Three-Dimensional Dental Polishing Esthetics, Dental |
| title_short |
Avaliação do envelhecimento artificial em propriedades físicas de resina nanocerâmica obtida por impressão tridimensional |
| title_full |
Avaliação do envelhecimento artificial em propriedades físicas de resina nanocerâmica obtida por impressão tridimensional |
| title_fullStr |
Avaliação do envelhecimento artificial em propriedades físicas de resina nanocerâmica obtida por impressão tridimensional |
| title_full_unstemmed |
Avaliação do envelhecimento artificial em propriedades físicas de resina nanocerâmica obtida por impressão tridimensional |
| title_sort |
Avaliação do envelhecimento artificial em propriedades físicas de resina nanocerâmica obtida por impressão tridimensional |
| author |
Porto, Amanda de Menezes |
| author_facet |
Porto, Amanda de Menezes |
| author_role |
author |
| dc.contributor.authorLattes.pt_BR.fl_str_mv |
http://lattes.cnpq.br/0326066358340927 |
| dc.contributor.advisorORCID.pt_BR.fl_str_mv |
https://orcid.org/0000-0001-7071-5886 |
| dc.contributor.advisorLattes.pt_BR.fl_str_mv |
http://lattes.cnpq.br/5524708607165176 |
| dc.contributor.authorORCID.pt_BR.fl_str_mv |
http://orcid.org/0009-0002-5787-0106 |
| dc.contributor.author.fl_str_mv |
Porto, Amanda de Menezes |
| dc.contributor.advisor1.fl_str_mv |
Pontes, Karina Matthes de Freitas |
| contributor_str_mv |
Pontes, Karina Matthes de Freitas |
| dc.subject.cnpq.fl_str_mv |
CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOS |
| topic |
CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOS Impressão Tridimensional Polimento Dentário Estética Dentária Printing, Three-Dimensional Dental Polishing Esthetics, Dental |
| dc.subject.ptbr.pt_BR.fl_str_mv |
Impressão Tridimensional Polimento Dentário Estética Dentária |
| dc.subject.en.pt_BR.fl_str_mv |
Printing, Three-Dimensional Dental Polishing Esthetics, Dental |
| description |
3D-printed nanoceramic resins have been indicated for definitive fixed prostheses, but data are lacking on the influence of surface finishing on the stability of their physical properties over time. The aim of this in vitro study was to evaluate the influence of mechanical polishing and extrinsic characterization with pigment and glaze on the physical properties of a 3D-printed nanoceramic resin subjected to artificial aging interventions. Sixty-four disks (15 × 2 mm; Voxelprint Ceramic; FGM Dental Group, Joinville, Brazil) were divided between the two protocols and allocated to four interventions (n = 8): simulated toothbrushing (16,000 and 32,000 cycles), thermal cycling (1,200 and 2,400 cycles), both corresponding to 1 and 2 years, pH cycling (28 days), and storage in distilled water (control). Color (ΔE00) and translucency (TP00) were calculated using the CIEDE2000 formula, gloss by 60-degree glossimetry, roughness (Ra) by contact profilometry, and sorption and solubility according to ISO 4049:2019, applying ANOVA (three factors for color, two for the other outcomes) and nonparametric tests (α = 0.05). Color was influenced by finishing (p = 0.009), time (p < 0.001), and aging (p = 0.031), with a difference between protocols only under thermal cycling in the first year (p = 0.010), and the acceptability threshold was exceeded only in the second year, by GM under thermal cycling, by GP under pH cycling, and by both under water storage, but by neither under simulated toothbrushing. GP was more translucent than GM from baseline (p < 0.001) and reduced TP00 in all four interventions (p < 0.001), whereas GM did not vary in any of them (p ≥ 0.092). Gloss decreased over time in all four interventions (p ≤ 0.022), and the initial advantage of GM under simulated toothbrushing and pH cycling (p ≤ 0.003) was not maintained (p ≥ 0.053). GM was rougher than GP from baseline and at all time points (p ≤ 0.001), with an increase in Ra in all four interventions (p ≤ 0.028), and sorption and solubility remained below the ISO 4049:2019 limits. The type of finishing differentiated color behavior only under thermal cycling in the first year, GP maintained a smoother surface under all conditions, and extrinsic characterization preserved translucency, but showed roughness above the clinical acceptability threshold and did not maintain the initial gloss, so neither protocol was superior across all outcomes. |
| publishDate |
2026 |
| dc.date.accessioned.fl_str_mv |
2026-10-20T18:04:01Z |
| dc.date.available.fl_str_mv |
2026-10-20T18:04:01Z |
| dc.date.issued.fl_str_mv |
2026 |
| dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
| dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
| format |
masterThesis |
| status_str |
publishedVersion |
| dc.identifier.citation.fl_str_mv |
PORTO, Amanda de Menezes. Avaliação do envelhecimento artificial em propriedades físicas de resina nanocerâmica obtida por impressão tridimensional. 2026. 62 f. Dissertação (Mestrado em Odontologia) - Faculdade de Farmácia, Odontologia e Enfermagem, Universidade Federal do Ceará, Fortaleza, 2026. Disponível em: http://repositorio.ufc.br/handle/riufc/88337. Acesso em: 20 out. 2026. |
| dc.identifier.uri.fl_str_mv |
http://repositorio.ufc.br/handle/riufc/88337 |
| identifier_str_mv |
PORTO, Amanda de Menezes. Avaliação do envelhecimento artificial em propriedades físicas de resina nanocerâmica obtida por impressão tridimensional. 2026. 62 f. Dissertação (Mestrado em Odontologia) - Faculdade de Farmácia, Odontologia e Enfermagem, Universidade Federal do Ceará, Fortaleza, 2026. Disponível em: http://repositorio.ufc.br/handle/riufc/88337. Acesso em: 20 out. 2026. |
| url |
http://repositorio.ufc.br/handle/riufc/88337 |
| dc.language.iso.fl_str_mv |
por |
| language |
por |
| dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/embargoedAccess |
| eu_rights_str_mv |
embargoedAccess |
| dc.source.none.fl_str_mv |
reponame:Repositório Institucional da Universidade Federal do Ceará (UFC) instname:Universidade Federal do Ceará (UFC) instacron:UFC |
| instname_str |
Universidade Federal do Ceará (UFC) |
| instacron_str |
UFC |
| institution |
UFC |
| reponame_str |
Repositório Institucional da Universidade Federal do Ceará (UFC) |
| collection |
Repositório Institucional da Universidade Federal do Ceará (UFC) |
| bitstream.url.fl_str_mv |
http://repositorio.ufc.br/bitstream/riufc/88337/2/2026_dis_amporto.pdf http://repositorio.ufc.br/bitstream/riufc/88337/3/license.txt |
| bitstream.checksum.fl_str_mv |
4c688f03ce4dd64e4ebf7b4b40a2568f 8a4605be74aa9ea9d79846c1fba20a33 |
| bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 |
| repository.name.fl_str_mv |
Repositório Institucional da Universidade Federal do Ceará (UFC) - Universidade Federal do Ceará (UFC) |
| repository.mail.fl_str_mv |
bu@ufc.br || repositorio@ufc.br |
| _version_ |
1881776021550661632 |