Análise Experimental da Redução de Arraste Por Adição de Polímeros Rígidos em Escoamentos Turbulentos
| Ano de defesa: | 2021 |
|---|---|
| Autor(a) principal: | |
| Orientador(a): | |
| Banca de defesa: | |
| Tipo de documento: | Dissertação |
| Tipo de acesso: | Acesso aberto |
| Idioma: | por |
| Instituição de defesa: |
Universidade Federal do Espírito Santo
BR Mestrado em Engenharia Mecânica Centro Tecnológico UFES Programa de Pós-Graduação em Engenharia Mecânica |
| Programa de Pós-Graduação: |
Não Informado pela instituição
|
| Departamento: |
Não Informado pela instituição
|
| País: |
Não Informado pela instituição
|
| Palavras-chave em Português: | |
| Link de acesso: | http://repositorio.ufes.br/handle/10/15301 |
Resumo: | The drag reduction phenomenon (DR) by polimeric injection, surfactans and fibers in turbulent flow has studies and records that exceed sixty years and diverse applications such as firefighting, liquid transportation and even in the field of medicine. This work aims to deepen the studies on the mechanisms of operation of this phenomenon, acquiring information about a turbulent flow of water with polymer additive through smooth pipes. To and this, it was necessary to acquire the instantaneous velocity fields for each experimental test with the aid of the two-dimensional Particle Image Velocimetry (PIV) technique. Thus, it is possible to obtain the turbulent properties of each experiment and evaluate the polymeric influence. The tests were conducted for a Reynolds number range from 17.000 to 50.000 for water and from 19.500 to 40.000 for the polymeric solution. 200 ppm of Guar Gum were used in water. Flow with this additive shows a maximum drag reduction of around 30%, changes in the damping layer on the velocity profile close to the wall, increase in the RMS profile of axial fluctuations and reduction in radial. The Reynolds stress was shown to reduce with the polymeric addition. |
| id |
UFES_6bb2415d0310cfef97ecbebe0f1755b1 |
|---|---|
| oai_identifier_str |
oai:repositorio.ufes.br:10/15301 |
| network_acronym_str |
UFES |
| network_name_str |
Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) |
| repository_id_str |
|
| spelling |
Análise Experimental da Redução de Arraste Por Adição de Polímeros Rígidos em Escoamentos Turbulentostitle.alternativeRedução de arrastesoluções poliméricasvelocimetria a laserescoamento turbulentosubject.br-rjbnEngenharia MecânicaThe drag reduction phenomenon (DR) by polimeric injection, surfactans and fibers in turbulent flow has studies and records that exceed sixty years and diverse applications such as firefighting, liquid transportation and even in the field of medicine. This work aims to deepen the studies on the mechanisms of operation of this phenomenon, acquiring information about a turbulent flow of water with polymer additive through smooth pipes. To and this, it was necessary to acquire the instantaneous velocity fields for each experimental test with the aid of the two-dimensional Particle Image Velocimetry (PIV) technique. Thus, it is possible to obtain the turbulent properties of each experiment and evaluate the polymeric influence. The tests were conducted for a Reynolds number range from 17.000 to 50.000 for water and from 19.500 to 40.000 for the polymeric solution. 200 ppm of Guar Gum were used in water. Flow with this additive shows a maximum drag reduction of around 30%, changes in the damping layer on the velocity profile close to the wall, increase in the RMS profile of axial fluctuations and reduction in radial. The Reynolds stress was shown to reduce with the polymeric addition.O fenômeno de redução de arraste (DR) por adição polimérica, sufactantes e fibras em escoamento turbulentos possui estudos e registros que ultrapassam sessenta anos e aplicações diversas como combate à incêndio, transporte de líquidos e até mesmo na área da medicina. Este trabalho tem o objetivo de aprofundar os estudos sobre os mecanismos de funcionamento deste fenômeno, adquirindo informações detalhadas de um escoamento turbulento de água com aditivo polimérico através de tubos lisos. Para tal, foram necessários adquirir os campos instantâneos de velocidade para cada teste experimental com o auxílio da técnica Velocimetria por Imagem de Partículas (PIV) bidimensional. Assim, é possível obter as propriedades turbulentas de cada experimento e avaliar a influência polimérica. Os testes foram conduzidos para um faixa de número de Reynolds de 17.000 a 50.000 para água e de 19.500 a 40.000 para a solução polimérica. Foram utilizados 200 ppm de Goma Guar em água. O escoamento com este aditivo apresentou uma redução de arraste máxima por volta de 30%, alterações na camada de amortecimento no perfil de velocidade próximo à parede, incremento no perfil RMS das flutuações axiais e redução nas radiais. A tensão de Reynolds mostrou-se reduzir com a adição polimérica.Universidade Federal do Espírito SantoBRMestrado em Engenharia MecânicaCentro TecnológicoUFESPrograma de Pós-Graduação em Engenharia MecânicaSiqueira, Renato do Nascimentohttps://orcid.org/0000-0002-8397-8180http://lattes.cnpq.br/9791817633014124http://lattes.cnpq.br/4634972323140468Azevedo, Luis Fernando Alzuguirhttps://orcid.org/0000-0003-3321-530Xhttp://lattes.cnpq.br/2254453960245715Santos, Jane Merihttps://orcid.org/0000000339332849http://lattes.cnpq.br/0120226021957540Brandão, Lucas Zampirole2024-05-30T00:50:18Z2024-05-30T00:50:18Z2021-02-10info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisTextapplication/pdfhttp://repositorio.ufes.br/handle/10/15301porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da Universidade Federal do Espírito Santo (riUfes)instname:Universidade Federal do Espírito Santo (UFES)instacron:UFES2024-12-02T16:24:37Zoai:repositorio.ufes.br:10/15301Repositório InstitucionalPUBhttp://repositorio.ufes.br/oai/requestriufes@ufes.bropendoar:21082024-12-02T16:24:37Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) - Universidade Federal do Espírito Santo (UFES)false |
| dc.title.none.fl_str_mv |
Análise Experimental da Redução de Arraste Por Adição de Polímeros Rígidos em Escoamentos Turbulentos title.alternative |
| title |
Análise Experimental da Redução de Arraste Por Adição de Polímeros Rígidos em Escoamentos Turbulentos |
| spellingShingle |
Análise Experimental da Redução de Arraste Por Adição de Polímeros Rígidos em Escoamentos Turbulentos Brandão, Lucas Zampirole Redução de arraste soluções poliméricas velocimetria a laser escoamento turbulento subject.br-rjbn Engenharia Mecânica |
| title_short |
Análise Experimental da Redução de Arraste Por Adição de Polímeros Rígidos em Escoamentos Turbulentos |
| title_full |
Análise Experimental da Redução de Arraste Por Adição de Polímeros Rígidos em Escoamentos Turbulentos |
| title_fullStr |
Análise Experimental da Redução de Arraste Por Adição de Polímeros Rígidos em Escoamentos Turbulentos |
| title_full_unstemmed |
Análise Experimental da Redução de Arraste Por Adição de Polímeros Rígidos em Escoamentos Turbulentos |
| title_sort |
Análise Experimental da Redução de Arraste Por Adição de Polímeros Rígidos em Escoamentos Turbulentos |
| author |
Brandão, Lucas Zampirole |
| author_facet |
Brandão, Lucas Zampirole |
| author_role |
author |
| dc.contributor.none.fl_str_mv |
Siqueira, Renato do Nascimento https://orcid.org/0000-0002-8397-8180 http://lattes.cnpq.br/9791817633014124 http://lattes.cnpq.br/4634972323140468 Azevedo, Luis Fernando Alzuguir https://orcid.org/0000-0003-3321-530X http://lattes.cnpq.br/2254453960245715 Santos, Jane Meri https://orcid.org/0000000339332849 http://lattes.cnpq.br/0120226021957540 |
| dc.contributor.author.fl_str_mv |
Brandão, Lucas Zampirole |
| dc.subject.por.fl_str_mv |
Redução de arraste soluções poliméricas velocimetria a laser escoamento turbulento subject.br-rjbn Engenharia Mecânica |
| topic |
Redução de arraste soluções poliméricas velocimetria a laser escoamento turbulento subject.br-rjbn Engenharia Mecânica |
| description |
The drag reduction phenomenon (DR) by polimeric injection, surfactans and fibers in turbulent flow has studies and records that exceed sixty years and diverse applications such as firefighting, liquid transportation and even in the field of medicine. This work aims to deepen the studies on the mechanisms of operation of this phenomenon, acquiring information about a turbulent flow of water with polymer additive through smooth pipes. To and this, it was necessary to acquire the instantaneous velocity fields for each experimental test with the aid of the two-dimensional Particle Image Velocimetry (PIV) technique. Thus, it is possible to obtain the turbulent properties of each experiment and evaluate the polymeric influence. The tests were conducted for a Reynolds number range from 17.000 to 50.000 for water and from 19.500 to 40.000 for the polymeric solution. 200 ppm of Guar Gum were used in water. Flow with this additive shows a maximum drag reduction of around 30%, changes in the damping layer on the velocity profile close to the wall, increase in the RMS profile of axial fluctuations and reduction in radial. The Reynolds stress was shown to reduce with the polymeric addition. |
| publishDate |
2021 |
| dc.date.none.fl_str_mv |
2021-02-10 2024-05-30T00:50:18Z 2024-05-30T00:50:18Z |
| dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
| dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
| format |
masterThesis |
| status_str |
publishedVersion |
| dc.identifier.uri.fl_str_mv |
http://repositorio.ufes.br/handle/10/15301 |
| url |
http://repositorio.ufes.br/handle/10/15301 |
| dc.language.iso.fl_str_mv |
por |
| language |
por |
| dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
| eu_rights_str_mv |
openAccess |
| dc.format.none.fl_str_mv |
Text application/pdf |
| dc.publisher.none.fl_str_mv |
Universidade Federal do Espírito Santo BR Mestrado em Engenharia Mecânica Centro Tecnológico UFES Programa de Pós-Graduação em Engenharia Mecânica |
| publisher.none.fl_str_mv |
Universidade Federal do Espírito Santo BR Mestrado em Engenharia Mecânica Centro Tecnológico UFES Programa de Pós-Graduação em Engenharia Mecânica |
| dc.source.none.fl_str_mv |
reponame:Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) instname:Universidade Federal do Espírito Santo (UFES) instacron:UFES |
| instname_str |
Universidade Federal do Espírito Santo (UFES) |
| instacron_str |
UFES |
| institution |
UFES |
| reponame_str |
Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) |
| collection |
Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) |
| repository.name.fl_str_mv |
Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) - Universidade Federal do Espírito Santo (UFES) |
| repository.mail.fl_str_mv |
riufes@ufes.br |
| _version_ |
1834479111109607424 |