Efeito da aplicação do gás ozônio na resistência de união entre resina composta e dentina

Detalhes bibliográficos
Ano de defesa: 2009
Autor(a) principal: RODRIGUES, Paula Cicília Faquim lattes
Orientador(a): SOUZA, João Batista de lattes
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal de Goiás
Programa de Pós-Graduação: Mestrado em Odontologia
Departamento: Ciência da Saúde
País: BR
Palavras-chave em Português:
Palavras-chave em Inglês:
Área do conhecimento CNPq:
Link de acesso: http://repositorio.bc.ufg.br/tede/handle/tde/1386
Resumo: The aim of this study was to evaluate the effect of ozone gas and its use with an antioxidant on the resin-dentin microtensile bond strength. The oclusal enamel of forty human third molars was then removed to expose a flat superficial dentin surface. The teeth were randomly divided into four groups (n = 10): (G1) untreated dentin with ozone (control group); (G2) ozone gas application for 40 s followed by acid etching; (G3) acid etching followed by ozone gas for 40s; and (G4) ozone gas for 40s with subsequent application of sodium ascorbato 10% for 10 min. Composite build-ups were constructed incrementally. Specimens were sectioned to obtain sticks with cross-sectional areas of 1mm2 to be tested in tension (0.5 mm/min). The microtensile bond strength values were analyzed by one-way ANOVA and Tukey s test (α=0.05). All sticks fractured were then observed under a stereomicroscope (40X). The results showed that the G1 had higher values of microtensile bond strength when compared to G2 and G3 (p=0.00). The values of microtensile bond strength of G1 and G4 were similar (p = 0158) and higher than the G2, but there was no difference between the values of G3 and G4 (p=0,115). The use of ozone prior to etching (G2) resulted in lower value of microtensile bond strength in all conditions evaluated (p = 0.00). The application of ozone gas decreased the microtensile bond strength of the interface dentin/composite resin, but the values were reversed when the use of sodium ascorbate
id UFG-2_81fe01d2a20ed4a07d79e51a3f4429c8
oai_identifier_str oai:repositorio.bc.ufg.br:tde/1386
network_acronym_str UFG-2
network_name_str Repositório Institucional da UFG
repository_id_str
spelling SOUZA, João Batista dehttp://lattes.cnpq.br/0642108682158061http://lattes.cnpq.br/2231071141130996RODRIGUES, Paula Cicília Faquim2014-07-29T15:22:00Z2010-04-222009-03-13RODRIGUES, Paula Cicília Faquim. Effect of application of ozone gas in the bond strength between composite and dentin. 2009. 68 f. Dissertação (Mestrado em Ciência da Saúde) - Universidade Federal de Goiás, Goiânia, 2009.http://repositorio.bc.ufg.br/tede/handle/tde/1386The aim of this study was to evaluate the effect of ozone gas and its use with an antioxidant on the resin-dentin microtensile bond strength. The oclusal enamel of forty human third molars was then removed to expose a flat superficial dentin surface. The teeth were randomly divided into four groups (n = 10): (G1) untreated dentin with ozone (control group); (G2) ozone gas application for 40 s followed by acid etching; (G3) acid etching followed by ozone gas for 40s; and (G4) ozone gas for 40s with subsequent application of sodium ascorbato 10% for 10 min. Composite build-ups were constructed incrementally. Specimens were sectioned to obtain sticks with cross-sectional areas of 1mm2 to be tested in tension (0.5 mm/min). The microtensile bond strength values were analyzed by one-way ANOVA and Tukey s test (α=0.05). All sticks fractured were then observed under a stereomicroscope (40X). The results showed that the G1 had higher values of microtensile bond strength when compared to G2 and G3 (p=0.00). The values of microtensile bond strength of G1 and G4 were similar (p = 0158) and higher than the G2, but there was no difference between the values of G3 and G4 (p=0,115). The use of ozone prior to etching (G2) resulted in lower value of microtensile bond strength in all conditions evaluated (p = 0.00). The application of ozone gas decreased the microtensile bond strength of the interface dentin/composite resin, but the values were reversed when the use of sodium ascorbateEste estudo teve como objetivo avaliar o efeito do gás ozônio e do ascorbato de sódio na resistência de união entre dentina e resina composta. O esmalte oclusal de 40 terceiros molares humanos foi removido expondo uma superfície plana de dentina. Os dentes foram divididos aleatoriamente em quatro grupos (n=10): (G1) dentina não tratada com ozônio (grupo controle); (G2) gás ozônio aplicado por 40s seguido pelo condicionamento ácido; (G3) condicionamento ácido seguido pela aplicação do gás ozônio por 40s; e (G4) gás ozônio por 40s com subsequente aplicação do ascorbato de sódio 10% por 10 min. Coroas de resina composta foram confeccionadas incrementalmente. Os espécimes obtidos foram seccionados obtendo palitos com área de secção transversal de 1mm2 a serem testados em ensaio de microtração (0,5 mm/min). Os valores de resistência de união a microtração foram analisados por meio da analise de variância ANOVA em fator único e teste de Tukey (α=0,05). Todos os palitos fraturados foram analisados em estereomicroscópio (40X). Os resultados mostraram que o G1 apresentou maiores valores de resistência de união quando comparado ao G2 e G3 (p=0,00). Os valores de resistência de união do G1 e G4 foram similares (p=0,158) e maiores que do G2, porém não houve diferença entre os valores de G3 e G4 (p=0,115). O uso do ozônio antes do condicionamento ácido (G2) resultou em menor valor de resistência de união em todas condições avaliadas (p=0,00). A aplicação do gás ozônio diminuiu a resistência de união ao teste de microtração da interface dentina/resina composta, porém os valores foram revertidos quando do uso do ascorbato de sódioMade available in DSpace on 2014-07-29T15:22:00Z (GMT). No. of bitstreams: 1 DISSERTACAO PAULA RODRIGUES ODONTOLOGIA.pdf: 2469324 bytes, checksum: 06856e4c36b3f2621c6c83d9aa0e9f32 (MD5) Previous issue date: 2009-03-13application/pdfhttp://repositorio.bc.ufg.br/TEDE/retrieve/3956/DISSERTACAO%20PAULA%20RODRIGUES%20ODONTOLOGIA.pdf.jpgporUniversidade Federal de GoiásMestrado em OdontologiaUFGBRCiência da SaúdeOzônio, Antioxidantes, Resinas compostas, Resistência à traçãoOzone, Antioxidants, Composite Resins, Tensile StrengthCNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOSEfeito da aplicação do gás ozônio na resistência de união entre resina composta e dentinaEffect of application of ozone gas in the bond strength between composite and dentininfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFGinstname:Universidade Federal de Goiás (UFG)instacron:UFGORIGINALDISSERTACAO PAULA RODRIGUES ODONTOLOGIA.pdfapplication/pdf2469324http://repositorio.bc.ufg.br/tede/bitstreams/9d6557fa-1093-4c02-976e-6b966621ce18/download06856e4c36b3f2621c6c83d9aa0e9f32MD51THUMBNAILDISSERTACAO PAULA RODRIGUES ODONTOLOGIA.pdf.jpgDISSERTACAO PAULA RODRIGUES ODONTOLOGIA.pdf.jpgGenerated Thumbnailimage/jpeg2451http://repositorio.bc.ufg.br/tede/bitstreams/c327e91f-64f5-41d9-9b94-bd289fb1c8f0/downloadca24c96c894ea695b77c89fe96f6ad62MD52tde/13862014-07-30 03:09:42.421open.accessoai:repositorio.bc.ufg.br:tde/1386http://repositorio.bc.ufg.br/tedeRepositório InstitucionalPUBhttp://repositorio.bc.ufg.br/oai/requesttasesdissertacoes.bc@ufg.bropendoar:2014-07-30T06:09:42Repositório Institucional da UFG - Universidade Federal de Goiás (UFG)false
dc.title.por.fl_str_mv Efeito da aplicação do gás ozônio na resistência de união entre resina composta e dentina
dc.title.alternative.eng.fl_str_mv Effect of application of ozone gas in the bond strength between composite and dentin
title Efeito da aplicação do gás ozônio na resistência de união entre resina composta e dentina
spellingShingle Efeito da aplicação do gás ozônio na resistência de união entre resina composta e dentina
RODRIGUES, Paula Cicília Faquim
Ozônio, Antioxidantes, Resinas compostas, Resistência à tração
Ozone, Antioxidants, Composite Resins, Tensile Strength
CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOS
title_short Efeito da aplicação do gás ozônio na resistência de união entre resina composta e dentina
title_full Efeito da aplicação do gás ozônio na resistência de união entre resina composta e dentina
title_fullStr Efeito da aplicação do gás ozônio na resistência de união entre resina composta e dentina
title_full_unstemmed Efeito da aplicação do gás ozônio na resistência de união entre resina composta e dentina
title_sort Efeito da aplicação do gás ozônio na resistência de união entre resina composta e dentina
author RODRIGUES, Paula Cicília Faquim
author_facet RODRIGUES, Paula Cicília Faquim
author_role author
dc.contributor.advisor1.fl_str_mv SOUZA, João Batista de
dc.contributor.advisor1Lattes.fl_str_mv http://lattes.cnpq.br/0642108682158061
dc.contributor.authorLattes.fl_str_mv http://lattes.cnpq.br/2231071141130996
dc.contributor.author.fl_str_mv RODRIGUES, Paula Cicília Faquim
contributor_str_mv SOUZA, João Batista de
dc.subject.por.fl_str_mv Ozônio, Antioxidantes, Resinas compostas, Resistência à tração
topic Ozônio, Antioxidantes, Resinas compostas, Resistência à tração
Ozone, Antioxidants, Composite Resins, Tensile Strength
CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOS
dc.subject.eng.fl_str_mv Ozone, Antioxidants, Composite Resins, Tensile Strength
dc.subject.cnpq.fl_str_mv CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOS
description The aim of this study was to evaluate the effect of ozone gas and its use with an antioxidant on the resin-dentin microtensile bond strength. The oclusal enamel of forty human third molars was then removed to expose a flat superficial dentin surface. The teeth were randomly divided into four groups (n = 10): (G1) untreated dentin with ozone (control group); (G2) ozone gas application for 40 s followed by acid etching; (G3) acid etching followed by ozone gas for 40s; and (G4) ozone gas for 40s with subsequent application of sodium ascorbato 10% for 10 min. Composite build-ups were constructed incrementally. Specimens were sectioned to obtain sticks with cross-sectional areas of 1mm2 to be tested in tension (0.5 mm/min). The microtensile bond strength values were analyzed by one-way ANOVA and Tukey s test (α=0.05). All sticks fractured were then observed under a stereomicroscope (40X). The results showed that the G1 had higher values of microtensile bond strength when compared to G2 and G3 (p=0.00). The values of microtensile bond strength of G1 and G4 were similar (p = 0158) and higher than the G2, but there was no difference between the values of G3 and G4 (p=0,115). The use of ozone prior to etching (G2) resulted in lower value of microtensile bond strength in all conditions evaluated (p = 0.00). The application of ozone gas decreased the microtensile bond strength of the interface dentin/composite resin, but the values were reversed when the use of sodium ascorbate
publishDate 2009
dc.date.issued.fl_str_mv 2009-03-13
dc.date.available.fl_str_mv 2010-04-22
dc.date.accessioned.fl_str_mv 2014-07-29T15:22:00Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.citation.fl_str_mv RODRIGUES, Paula Cicília Faquim. Effect of application of ozone gas in the bond strength between composite and dentin. 2009. 68 f. Dissertação (Mestrado em Ciência da Saúde) - Universidade Federal de Goiás, Goiânia, 2009.
dc.identifier.uri.fl_str_mv http://repositorio.bc.ufg.br/tede/handle/tde/1386
identifier_str_mv RODRIGUES, Paula Cicília Faquim. Effect of application of ozone gas in the bond strength between composite and dentin. 2009. 68 f. Dissertação (Mestrado em Ciência da Saúde) - Universidade Federal de Goiás, Goiânia, 2009.
url http://repositorio.bc.ufg.br/tede/handle/tde/1386
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Goiás
dc.publisher.program.fl_str_mv Mestrado em Odontologia
dc.publisher.initials.fl_str_mv UFG
dc.publisher.country.fl_str_mv BR
dc.publisher.department.fl_str_mv Ciência da Saúde
publisher.none.fl_str_mv Universidade Federal de Goiás
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFG
instname:Universidade Federal de Goiás (UFG)
instacron:UFG
instname_str Universidade Federal de Goiás (UFG)
instacron_str UFG
institution UFG
reponame_str Repositório Institucional da UFG
collection Repositório Institucional da UFG
bitstream.url.fl_str_mv http://repositorio.bc.ufg.br/tede/bitstreams/9d6557fa-1093-4c02-976e-6b966621ce18/download
http://repositorio.bc.ufg.br/tede/bitstreams/c327e91f-64f5-41d9-9b94-bd289fb1c8f0/download
bitstream.checksum.fl_str_mv 06856e4c36b3f2621c6c83d9aa0e9f32
ca24c96c894ea695b77c89fe96f6ad62
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
repository.name.fl_str_mv Repositório Institucional da UFG - Universidade Federal de Goiás (UFG)
repository.mail.fl_str_mv tasesdissertacoes.bc@ufg.br
_version_ 1798045096479817728