Estudo de um tomógrafo capacitivo elétrico paralelo aplicado ao processo adsortivo
Ano de defesa: | 2009 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal da Paraíba
BR Engenharia Mecânica Programa de Pós-Graduação em Engenharia Mecânica UFPB |
Programa de Pós-Graduação: |
Não Informado pela instituição
|
Departamento: |
Não Informado pela instituição
|
País: |
Não Informado pela instituição
|
Palavras-chave em Português: | |
Link de acesso: | https://repositorio.ufpb.br/jspui/handle/tede/5405 |
Resumo: | Adsorption refrigeration systems are supposed to complement or even substitute the ordinary systems based on vapour compression. This work aims to study the application of a new technique of Electrical Capacitive Tomography - a parallel approach on the visualization of the adsorption process which occurs in the sorption bed of an adsorption refrigerator. To archive this goal, a sorption bed glass prototype was developed and it allows the utilization of the Parallel ECT to map the spatial distribution of methanol into the activated charcoal inside the sorption bed and makes it feasible to optimise the process. The principles of the adsorption phenomenon are explained regarding the adsorption refrigeration cycle. The Parallel ECT system is based on a wideband electronic differentiator which is supposed to be immune to stray capacitances often encountered in ordinary ECT systems, to have a high sensitivity, good signal-to-noise ratio, accuracy, and to be faster then the serial tomography. The various components of a tomographic system are analyzed as well as the results obtained from PSPICE electronic simulations and the making process of the printed circuit boards for the modules of an ECT system is also shown. |
id |
UFPB_ae8aa0be28809a2d268efd646c609ac3 |
---|---|
oai_identifier_str |
oai:repositorio.ufpb.br:tede/5405 |
network_acronym_str |
UFPB |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UFPB |
repository_id_str |
|
spelling |
Estudo de um tomógrafo capacitivo elétrico paralelo aplicado ao processo adsortivoStudy of a parallel electrical capacitance tomographer applied to adsorption processTomografia capacitiva elétrica paralelaSimulação PSPICESensor capacitivoProcesso adsortivoInstrumentaçãoParallel electrical capacitive tomographyPSPICE simulationCapacitive sensorInstrumentationENGENHARIAS::ENGENHARIA MECANICAAdsorption refrigeration systems are supposed to complement or even substitute the ordinary systems based on vapour compression. This work aims to study the application of a new technique of Electrical Capacitive Tomography - a parallel approach on the visualization of the adsorption process which occurs in the sorption bed of an adsorption refrigerator. To archive this goal, a sorption bed glass prototype was developed and it allows the utilization of the Parallel ECT to map the spatial distribution of methanol into the activated charcoal inside the sorption bed and makes it feasible to optimise the process. The principles of the adsorption phenomenon are explained regarding the adsorption refrigeration cycle. The Parallel ECT system is based on a wideband electronic differentiator which is supposed to be immune to stray capacitances often encountered in ordinary ECT systems, to have a high sensitivity, good signal-to-noise ratio, accuracy, and to be faster then the serial tomography. The various components of a tomographic system are analyzed as well as the results obtained from PSPICE electronic simulations and the making process of the printed circuit boards for the modules of an ECT system is also shown.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPESSistemas de refrigeração por adsorção se constituem numa das alternativas para a complementação, ou mesmo, substituição de sistemas convencionais por compressão de vapor. Este trabalho visa estudar a aplicação de uma nova técnica de Tomografia Capacitiva Elétrica (TCE) na visualização do processo adsortivo que ocorre no leito adsorvedor durante um ciclo de operação de um de refrigerador por adsorção. Para esta finalidade, foi desenvolvido um protótipo do leito adsorvedor em vidro que permite a utilização da TCE Paralela para mapear a distribuição espacial do metanol no carvão ativado no adsorvedor e possibilita sua otimização. Os princípios do fenômeno de adsorção são também abordados, no que se refere ao ciclo de refrigeração por adsorção. É descrito um novo tipo de TCE através do processamento paralelo de sinal e utilizando um circuito transdutor constituído de um diferenciador de alta taxa de subida e grande largura de banda. A este sistema é creditada a imunidade a capacitâncias parasitas, comum aos sistemas usuais de TCE, além de alta sensibilidade, boa relação sinal-ruído, exatidão e por ser mais rápido que a tomografia serial. Os diversos componentes deste sistema tomográfico são analisados, bem como os resultados obtidos através de simulação eletrônica do tipo PSPICE e também o processo de confecção das placas de circuito impresso para os módulos de um sistema TCEUniversidade Federal da ParaíbaBREngenharia MecânicaPrograma de Pós-Graduação em Engenharia MecânicaUFPBBelo, Francisco Antôniohttp://lattes.cnpq.br/9462923096505763Soares., Manoel Brasileiro2015-05-08T15:00:04Z2018-07-21T00:03:41Z2010-12-162018-07-21T00:03:41Z2009-04-30info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfSOARES., Manoel Brasileiro. STUDY OF A PARALLEL ELECTRICAL CAPACITANCE TOMOGRAPHER APPLIED TO ADSORPTION PROCESS. 2009. 93 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2009.https://repositorio.ufpb.br/jspui/handle/tede/5405porinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UFPBinstname:Universidade Federal da Paraíba (UFPB)instacron:UFPB2018-09-06T00:53:33Zoai:repositorio.ufpb.br:tede/5405Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufpb.br/PUBhttp://tede.biblioteca.ufpb.br:8080/oai/requestdiretoria@ufpb.br|| diretoria@ufpb.bropendoar:2018-09-06T00:53:33Biblioteca Digital de Teses e Dissertações da UFPB - Universidade Federal da Paraíba (UFPB)false |
dc.title.none.fl_str_mv |
Estudo de um tomógrafo capacitivo elétrico paralelo aplicado ao processo adsortivo Study of a parallel electrical capacitance tomographer applied to adsorption process |
title |
Estudo de um tomógrafo capacitivo elétrico paralelo aplicado ao processo adsortivo |
spellingShingle |
Estudo de um tomógrafo capacitivo elétrico paralelo aplicado ao processo adsortivo Soares., Manoel Brasileiro Tomografia capacitiva elétrica paralela Simulação PSPICE Sensor capacitivo Processo adsortivo Instrumentação Parallel electrical capacitive tomography PSPICE simulation Capacitive sensor Instrumentation ENGENHARIAS::ENGENHARIA MECANICA |
title_short |
Estudo de um tomógrafo capacitivo elétrico paralelo aplicado ao processo adsortivo |
title_full |
Estudo de um tomógrafo capacitivo elétrico paralelo aplicado ao processo adsortivo |
title_fullStr |
Estudo de um tomógrafo capacitivo elétrico paralelo aplicado ao processo adsortivo |
title_full_unstemmed |
Estudo de um tomógrafo capacitivo elétrico paralelo aplicado ao processo adsortivo |
title_sort |
Estudo de um tomógrafo capacitivo elétrico paralelo aplicado ao processo adsortivo |
author |
Soares., Manoel Brasileiro |
author_facet |
Soares., Manoel Brasileiro |
author_role |
author |
dc.contributor.none.fl_str_mv |
Belo, Francisco Antônio http://lattes.cnpq.br/9462923096505763 |
dc.contributor.author.fl_str_mv |
Soares., Manoel Brasileiro |
dc.subject.por.fl_str_mv |
Tomografia capacitiva elétrica paralela Simulação PSPICE Sensor capacitivo Processo adsortivo Instrumentação Parallel electrical capacitive tomography PSPICE simulation Capacitive sensor Instrumentation ENGENHARIAS::ENGENHARIA MECANICA |
topic |
Tomografia capacitiva elétrica paralela Simulação PSPICE Sensor capacitivo Processo adsortivo Instrumentação Parallel electrical capacitive tomography PSPICE simulation Capacitive sensor Instrumentation ENGENHARIAS::ENGENHARIA MECANICA |
description |
Adsorption refrigeration systems are supposed to complement or even substitute the ordinary systems based on vapour compression. This work aims to study the application of a new technique of Electrical Capacitive Tomography - a parallel approach on the visualization of the adsorption process which occurs in the sorption bed of an adsorption refrigerator. To archive this goal, a sorption bed glass prototype was developed and it allows the utilization of the Parallel ECT to map the spatial distribution of methanol into the activated charcoal inside the sorption bed and makes it feasible to optimise the process. The principles of the adsorption phenomenon are explained regarding the adsorption refrigeration cycle. The Parallel ECT system is based on a wideband electronic differentiator which is supposed to be immune to stray capacitances often encountered in ordinary ECT systems, to have a high sensitivity, good signal-to-noise ratio, accuracy, and to be faster then the serial tomography. The various components of a tomographic system are analyzed as well as the results obtained from PSPICE electronic simulations and the making process of the printed circuit boards for the modules of an ECT system is also shown. |
publishDate |
2009 |
dc.date.none.fl_str_mv |
2009-04-30 2010-12-16 2015-05-08T15:00:04Z 2018-07-21T00:03:41Z 2018-07-21T00:03:41Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
SOARES., Manoel Brasileiro. STUDY OF A PARALLEL ELECTRICAL CAPACITANCE TOMOGRAPHER APPLIED TO ADSORPTION PROCESS. 2009. 93 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2009. https://repositorio.ufpb.br/jspui/handle/tede/5405 |
identifier_str_mv |
SOARES., Manoel Brasileiro. STUDY OF A PARALLEL ELECTRICAL CAPACITANCE TOMOGRAPHER APPLIED TO ADSORPTION PROCESS. 2009. 93 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2009. |
url |
https://repositorio.ufpb.br/jspui/handle/tede/5405 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal da Paraíba BR Engenharia Mecânica Programa de Pós-Graduação em Engenharia Mecânica UFPB |
publisher.none.fl_str_mv |
Universidade Federal da Paraíba BR Engenharia Mecânica Programa de Pós-Graduação em Engenharia Mecânica UFPB |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UFPB instname:Universidade Federal da Paraíba (UFPB) instacron:UFPB |
instname_str |
Universidade Federal da Paraíba (UFPB) |
instacron_str |
UFPB |
institution |
UFPB |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UFPB |
collection |
Biblioteca Digital de Teses e Dissertações da UFPB |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UFPB - Universidade Federal da Paraíba (UFPB) |
repository.mail.fl_str_mv |
diretoria@ufpb.br|| diretoria@ufpb.br |
_version_ |
1797057815905304576 |