Caracterização mecânica, estabilidade térmica e reação ao fogo do bambu mossô (L. Phyllostachys pubescens)

Detalhes bibliográficos
Ano de defesa: 2019
Autor(a) principal: Gomes, Bruno Menezes da Cunha
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal do Rio de Janeiro
Brasil
Instituto Alberto Luiz Coimbra de Pós-Graduação e Pesquisa de Engenharia
Programa de Pós-Graduação em Engenharia Civil
UFRJ
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://hdl.handle.net/11422/13692
Resumo: This research presents a behavioral analysis of Phyllostachys pubescens bamboo under uniaxial compression loads and three-point flexion, as well as its reaction to fire and its behavior under high temperatures. Compressive strength tests were performed on samples with an aspect ratio (H/D) of 1, 2 and 3, on knotless and 1 and 2 knot samples and on saturated samples at equilibrium humidity. Three point bending tests were performed on both saturated and natural moisture samples. The effect of temperature was studied by performing physical and direct tensile tests on bamboo slats before and after exposure to temperatures of 100, 150, 200 and 250 ºC. The influence of the heating rate (0.5 and 20 °C/min) and exposure time (15, 30, 60, 120 and 240 minutes) on the residual physical and mechanical properties of bamboo was evaluated. The reaction to fire was evaluated by conducting calorimeter cone tests with a radiant flux of 50 kW/m². The results indicated that at up to 100C there are tensile strength gains, the most suitable geometry for the uniaxial compression test is 2DHSN and that the reaction to fire of bamboo is comparable to that of wood.
id UFRJ_fd61b9f5cc16218108302c33d9d261b2
oai_identifier_str oai:pantheon.ufrj.br:11422/13692
network_acronym_str UFRJ
network_name_str Repositório Institucional da UFRJ
repository_id_str
spelling Caracterização mecânica, estabilidade térmica e reação ao fogo do bambu mossô (L. Phyllostachys pubescens)Mechanical characterization, thermal stability and reaction to fire and bamboo moso (L. Phyllostachys pubescens)BambuReação ao fogoTemperaturaSustentabilidadeCNPQ::ENGENHARIAS::ENGENHARIA CIVILThis research presents a behavioral analysis of Phyllostachys pubescens bamboo under uniaxial compression loads and three-point flexion, as well as its reaction to fire and its behavior under high temperatures. Compressive strength tests were performed on samples with an aspect ratio (H/D) of 1, 2 and 3, on knotless and 1 and 2 knot samples and on saturated samples at equilibrium humidity. Three point bending tests were performed on both saturated and natural moisture samples. The effect of temperature was studied by performing physical and direct tensile tests on bamboo slats before and after exposure to temperatures of 100, 150, 200 and 250 ºC. The influence of the heating rate (0.5 and 20 °C/min) and exposure time (15, 30, 60, 120 and 240 minutes) on the residual physical and mechanical properties of bamboo was evaluated. The reaction to fire was evaluated by conducting calorimeter cone tests with a radiant flux of 50 kW/m². The results indicated that at up to 100C there are tensile strength gains, the most suitable geometry for the uniaxial compression test is 2DHSN and that the reaction to fire of bamboo is comparable to that of wood.Esta pesquisa apresenta uma análise comportamental do bambu da espécie Phyllostachys pubescens sob cargas de compressão uniaxial e flexão em três pontos, além da sua reação ao fogo e seu comportamento sob altas temperaturas. Ensaios de resistência a compressão foram realizados em amostras com relação de aspecto (H/D) de 1, 2 e 3, em amostras sem nó e com 1 e 2 nós e em amostras saturadas e na condição de umidade de equilíbrio. Ensaios de flexão em três pontos foram realizados tanto em amostras saturadas quanto na umidade natural. O efeito da temperatura foi estudado realizando-se ensaios físicos e de tração direta em ripas de bambu antes e após exposição das mesmas às temperaturas de 100, 150, 200 e 250 ºC. Foi avaliada a influência da taxa de aquecimento (0,5 e 20 °C/min) e do tempo de exposições (15, 30, 60, 120 e 240 minutos) nas propriedades físicas e mecânicas residuais do bambu. A reação ao fogo foi avaliada realizando ensaios no cone calorímetro de perda de massa com um fluxo radiante de 50 kW/m². Os resultados obtidos indicaram que a até 100C há ganhos de resistência a tração, a geometria mais adequada para o ensaio de compressão uniaxial é 2DHSN e que a reação ao fogo do bambu é comparável às de madeiras.Universidade Federal do Rio de JaneiroBrasilInstituto Alberto Luiz Coimbra de Pós-Graduação e Pesquisa de EngenhariaPrograma de Pós-Graduação em Engenharia CivilUFRJToledo Filho, Romildo Diashttp://lattes.cnpq.br/8449916971915629http://lattes.cnpq.br/5286278776172860Gomes, Otávio da Fonseca MartinsNascimento, Monique Amaro de Freitas RochaVitorino, Fabrício de CamposGomes, Bruno Menezes da Cunha2021-02-10T18:58:54Z2023-12-21T03:07:25Z2019-07info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesishttp://hdl.handle.net/11422/13692porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFRJinstname:Universidade Federal do Rio de Janeiro (UFRJ)instacron:UFRJ2023-12-21T03:07:25Zoai:pantheon.ufrj.br:11422/13692Repositório InstitucionalPUBhttp://www.pantheon.ufrj.br/oai/requestpantheon@sibi.ufrj.bropendoar:2023-12-21T03:07:25Repositório Institucional da UFRJ - Universidade Federal do Rio de Janeiro (UFRJ)false
dc.title.none.fl_str_mv Caracterização mecânica, estabilidade térmica e reação ao fogo do bambu mossô (L. Phyllostachys pubescens)
Mechanical characterization, thermal stability and reaction to fire and bamboo moso (L. Phyllostachys pubescens)
title Caracterização mecânica, estabilidade térmica e reação ao fogo do bambu mossô (L. Phyllostachys pubescens)
spellingShingle Caracterização mecânica, estabilidade térmica e reação ao fogo do bambu mossô (L. Phyllostachys pubescens)
Gomes, Bruno Menezes da Cunha
Bambu
Reação ao fogo
Temperatura
Sustentabilidade
CNPQ::ENGENHARIAS::ENGENHARIA CIVIL
title_short Caracterização mecânica, estabilidade térmica e reação ao fogo do bambu mossô (L. Phyllostachys pubescens)
title_full Caracterização mecânica, estabilidade térmica e reação ao fogo do bambu mossô (L. Phyllostachys pubescens)
title_fullStr Caracterização mecânica, estabilidade térmica e reação ao fogo do bambu mossô (L. Phyllostachys pubescens)
title_full_unstemmed Caracterização mecânica, estabilidade térmica e reação ao fogo do bambu mossô (L. Phyllostachys pubescens)
title_sort Caracterização mecânica, estabilidade térmica e reação ao fogo do bambu mossô (L. Phyllostachys pubescens)
author Gomes, Bruno Menezes da Cunha
author_facet Gomes, Bruno Menezes da Cunha
author_role author
dc.contributor.none.fl_str_mv Toledo Filho, Romildo Dias
http://lattes.cnpq.br/8449916971915629
http://lattes.cnpq.br/5286278776172860
Gomes, Otávio da Fonseca Martins
Nascimento, Monique Amaro de Freitas Rocha
Vitorino, Fabrício de Campos
dc.contributor.author.fl_str_mv Gomes, Bruno Menezes da Cunha
dc.subject.por.fl_str_mv Bambu
Reação ao fogo
Temperatura
Sustentabilidade
CNPQ::ENGENHARIAS::ENGENHARIA CIVIL
topic Bambu
Reação ao fogo
Temperatura
Sustentabilidade
CNPQ::ENGENHARIAS::ENGENHARIA CIVIL
description This research presents a behavioral analysis of Phyllostachys pubescens bamboo under uniaxial compression loads and three-point flexion, as well as its reaction to fire and its behavior under high temperatures. Compressive strength tests were performed on samples with an aspect ratio (H/D) of 1, 2 and 3, on knotless and 1 and 2 knot samples and on saturated samples at equilibrium humidity. Three point bending tests were performed on both saturated and natural moisture samples. The effect of temperature was studied by performing physical and direct tensile tests on bamboo slats before and after exposure to temperatures of 100, 150, 200 and 250 ºC. The influence of the heating rate (0.5 and 20 °C/min) and exposure time (15, 30, 60, 120 and 240 minutes) on the residual physical and mechanical properties of bamboo was evaluated. The reaction to fire was evaluated by conducting calorimeter cone tests with a radiant flux of 50 kW/m². The results indicated that at up to 100C there are tensile strength gains, the most suitable geometry for the uniaxial compression test is 2DHSN and that the reaction to fire of bamboo is comparable to that of wood.
publishDate 2019
dc.date.none.fl_str_mv 2019-07
2021-02-10T18:58:54Z
2023-12-21T03:07:25Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/11422/13692
url http://hdl.handle.net/11422/13692
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.publisher.none.fl_str_mv Universidade Federal do Rio de Janeiro
Brasil
Instituto Alberto Luiz Coimbra de Pós-Graduação e Pesquisa de Engenharia
Programa de Pós-Graduação em Engenharia Civil
UFRJ
publisher.none.fl_str_mv Universidade Federal do Rio de Janeiro
Brasil
Instituto Alberto Luiz Coimbra de Pós-Graduação e Pesquisa de Engenharia
Programa de Pós-Graduação em Engenharia Civil
UFRJ
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFRJ
instname:Universidade Federal do Rio de Janeiro (UFRJ)
instacron:UFRJ
instname_str Universidade Federal do Rio de Janeiro (UFRJ)
instacron_str UFRJ
institution UFRJ
reponame_str Repositório Institucional da UFRJ
collection Repositório Institucional da UFRJ
repository.name.fl_str_mv Repositório Institucional da UFRJ - Universidade Federal do Rio de Janeiro (UFRJ)
repository.mail.fl_str_mv pantheon@sibi.ufrj.br
_version_ 1861279106458451968