Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados

Detalhes bibliográficos
Ano de defesa: 2015
Autor(a) principal: Sousa, Paula Luciana Rodrigues de
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal do Rio Grande do Norte
Brasil
UFRN
PÓS-GRADUAÇÃO EM ENGENHARIA QUÍMICA
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: https://repositorio.ufrn.br/jspui/handle/123456789/20027
Resumo: During the oil refining process a huge discard volume of water occurs, which carries the contaminants from the process. A class of contaminant compounds resulting from the petrochemical industry are the Polyaromatic Hydrocarbons (PAH's). To evaluate the biodegradation of Dibenzothiophene in refinery water a synthetic wastewater was prepared to be treated using activated sludge. For this, a 2 3 Composite Design (plus 3 central points and six axial points) was carried out. The planning had as independent variables (factors) the initial concentration of DBT, pH and time of biodegradation. Biodegradation of DBT was assayed following the parameters COD, pH, temperature, SS, VSS, FVS, SVI. Concerned to the chromatographic conditions, a methodology was validated in order to verify the presence of DBT and its metabolite, 2-HBF, in the final wastewater treated by activated sludge system using a liquid - liquid extraction coupled to HPLC / UV analysis. The parameters used for validation were DL, QL, linearity, recovery and repeatability. As for optimization, the results indicated that the studied methodology can be used in monitoring the DBT degradation and 2- HBF by activated sludge, as they showed excellent linearity values, coefficients of variation, so as satisfactory recovery percentage. COD reduction efficiency tests showed an average percentage of 64.4%. The increasing trend for the results for the TSS and VSS tests showed that the activated sludge was well tailored. The best operating conditions for the reduction of COD were observed when operated with median concentrations of DBT, a higher time to biodegradation, and pH in both the acidic range as the basic one. The biodegradability of the DBT was confirmed by determining the presence of HBF-2. The highest concentrations of HBF-2 were obtained in extreme concentrations of DBT and pH, and higher biodegradation times.
id UFRN_0b20ff7425bdd2ce669f4d570a67de1b
oai_identifier_str oai:repositorio.ufrn.br:123456789/20027
network_acronym_str UFRN
network_name_str Repositório Institucional da UFRN
repository_id_str
spelling Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativadosDibenzothiophene biodegradation evaluation using activated sludgeDibenzotiofeno2-HidroxibifenilLodos ativadosCNPQ::ENGENHARIAS::ENGENHARIA QUIMICADuring the oil refining process a huge discard volume of water occurs, which carries the contaminants from the process. A class of contaminant compounds resulting from the petrochemical industry are the Polyaromatic Hydrocarbons (PAH's). To evaluate the biodegradation of Dibenzothiophene in refinery water a synthetic wastewater was prepared to be treated using activated sludge. For this, a 2 3 Composite Design (plus 3 central points and six axial points) was carried out. The planning had as independent variables (factors) the initial concentration of DBT, pH and time of biodegradation. Biodegradation of DBT was assayed following the parameters COD, pH, temperature, SS, VSS, FVS, SVI. Concerned to the chromatographic conditions, a methodology was validated in order to verify the presence of DBT and its metabolite, 2-HBF, in the final wastewater treated by activated sludge system using a liquid - liquid extraction coupled to HPLC / UV analysis. The parameters used for validation were DL, QL, linearity, recovery and repeatability. As for optimization, the results indicated that the studied methodology can be used in monitoring the DBT degradation and 2- HBF by activated sludge, as they showed excellent linearity values, coefficients of variation, so as satisfactory recovery percentage. COD reduction efficiency tests showed an average percentage of 64.4%. The increasing trend for the results for the TSS and VSS tests showed that the activated sludge was well tailored. The best operating conditions for the reduction of COD were observed when operated with median concentrations of DBT, a higher time to biodegradation, and pH in both the acidic range as the basic one. The biodegradability of the DBT was confirmed by determining the presence of HBF-2. The highest concentrations of HBF-2 were obtained in extreme concentrations of DBT and pH, and higher biodegradation times.Durante o processo de refino do petróleo tem-se como descarte um grande volume de água, a qual carrega os contaminantes provenientes do processo. Uma classe de compostos contaminantes, decorrente da indústria petroquímica, são os hidrocarbonetos poliaromáticos (HPA’s). Visando avaliar a biodegradação do Dibenzotiofeno presente na água de refinaria preparou-se um efluente sintético para ser tratado utilizando lodos ativados. Para isso, realizou-se um planejamento composto central 2³ com triplicata no ponto central e 6 pontos axiais tendo como variáveis independentes (fatores) a concentração inicial de DBT, o pH e o tempo de biodegradação. A presença do DBT, e de seu derivado 2-HBF, no efluente final tratado pelo sistema de lodos ativados foi monitorada efetuando-se uma extração líquido - líquido com posterior análise em CLAE/UV utilizando-se uma metodologia otimizada no presente estudo. A biodegradação do DBT foi verificada monitorando-se os parâmetros DQO, pH, temperatura, SST, SSV, VFL, IVL. Quanto à adequação das análises cromatográficas, os resultados indicaram que a metodologia avaliada pode ser utilizada no acompanhamento da degradação de DBT e 2-HBF por lodos ativados, visto que foram obtidos ótimos valores de linearidade, coeficientes de variação, assim também como percentuais de recuperação bastante satisfatórios. Para os testes de eficiência de redução da DQO foi obtido um percentual médio de 64,4 %. Os comportamentos crescentes dos resultados para os testes de SST e SSV mostraram que os lodos ativados foram bem adaptados. As melhores condições operacionais para redução de DQO foram verificadas quando operados com concentrações medianas de DBT, maiores tempo para biodegradação, e pH tanto na faixa ácida quanto na básica. A biodegradação do DBT foi confirmada avaliando-se a presença do 2-HBF. As maiores concentrações de 2-HBF foram obtidas nos extremos das concentrações de DBT e de pH, e em maiores tempos de biodegradação.Universidade Federal do Rio Grande do NorteBrasilUFRNPÓS-GRADUAÇÃO EM ENGENHARIA QUÍMICASantos, Everaldo Silvino doshttp://lattes.cnpq.br/0332768225098733http://lattes.cnpq.br/4330639792072559Macedo, Gorete Ribeiro dehttp://lattes.cnpq.br/3324083094904117Paulo, João Bosco de Araújohttp://lattes.cnpq.br/4322467752580322Araújo, Sarah de Abreu MoreiraSousa, Paula Luciana Rodrigues de2016-03-12T00:09:54Z2016-03-12T00:09:54Z2015-02-02info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfSOUSA, Paula Luciana Rodrigues de. Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados. 2015. 64f. Dissertação (Mestrado em Engenharia Química) - Centro de Tecnologia, Universidade Federal do Rio Grande do Norte, Natal, 2015.https://repositorio.ufrn.br/jspui/handle/123456789/20027porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFRNinstname:Universidade Federal do Rio Grande do Norte (UFRN)instacron:UFRN2017-11-02T17:51:18Zoai:repositorio.ufrn.br:123456789/20027Repositório InstitucionalPUBhttp://repositorio.ufrn.br/oai/repositorio@bczm.ufrn.bropendoar:2017-11-02T17:51:18Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN)false
dc.title.none.fl_str_mv Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados
Dibenzothiophene biodegradation evaluation using activated sludge
title Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados
spellingShingle Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados
Sousa, Paula Luciana Rodrigues de
Dibenzotiofeno
2-Hidroxibifenil
Lodos ativados
CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA
title_short Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados
title_full Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados
title_fullStr Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados
title_full_unstemmed Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados
title_sort Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados
author Sousa, Paula Luciana Rodrigues de
author_facet Sousa, Paula Luciana Rodrigues de
author_role author
dc.contributor.none.fl_str_mv Santos, Everaldo Silvino dos

http://lattes.cnpq.br/0332768225098733

http://lattes.cnpq.br/4330639792072559
Macedo, Gorete Ribeiro de

http://lattes.cnpq.br/3324083094904117
Paulo, João Bosco de Araújo

http://lattes.cnpq.br/4322467752580322
Araújo, Sarah de Abreu Moreira

dc.contributor.author.fl_str_mv Sousa, Paula Luciana Rodrigues de
dc.subject.por.fl_str_mv Dibenzotiofeno
2-Hidroxibifenil
Lodos ativados
CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA
topic Dibenzotiofeno
2-Hidroxibifenil
Lodos ativados
CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA
description During the oil refining process a huge discard volume of water occurs, which carries the contaminants from the process. A class of contaminant compounds resulting from the petrochemical industry are the Polyaromatic Hydrocarbons (PAH's). To evaluate the biodegradation of Dibenzothiophene in refinery water a synthetic wastewater was prepared to be treated using activated sludge. For this, a 2 3 Composite Design (plus 3 central points and six axial points) was carried out. The planning had as independent variables (factors) the initial concentration of DBT, pH and time of biodegradation. Biodegradation of DBT was assayed following the parameters COD, pH, temperature, SS, VSS, FVS, SVI. Concerned to the chromatographic conditions, a methodology was validated in order to verify the presence of DBT and its metabolite, 2-HBF, in the final wastewater treated by activated sludge system using a liquid - liquid extraction coupled to HPLC / UV analysis. The parameters used for validation were DL, QL, linearity, recovery and repeatability. As for optimization, the results indicated that the studied methodology can be used in monitoring the DBT degradation and 2- HBF by activated sludge, as they showed excellent linearity values, coefficients of variation, so as satisfactory recovery percentage. COD reduction efficiency tests showed an average percentage of 64.4%. The increasing trend for the results for the TSS and VSS tests showed that the activated sludge was well tailored. The best operating conditions for the reduction of COD were observed when operated with median concentrations of DBT, a higher time to biodegradation, and pH in both the acidic range as the basic one. The biodegradability of the DBT was confirmed by determining the presence of HBF-2. The highest concentrations of HBF-2 were obtained in extreme concentrations of DBT and pH, and higher biodegradation times.
publishDate 2015
dc.date.none.fl_str_mv 2015-02-02
2016-03-12T00:09:54Z
2016-03-12T00:09:54Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv SOUSA, Paula Luciana Rodrigues de. Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados. 2015. 64f. Dissertação (Mestrado em Engenharia Química) - Centro de Tecnologia, Universidade Federal do Rio Grande do Norte, Natal, 2015.
https://repositorio.ufrn.br/jspui/handle/123456789/20027
identifier_str_mv SOUSA, Paula Luciana Rodrigues de. Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados. 2015. 64f. Dissertação (Mestrado em Engenharia Química) - Centro de Tecnologia, Universidade Federal do Rio Grande do Norte, Natal, 2015.
url https://repositorio.ufrn.br/jspui/handle/123456789/20027
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal do Rio Grande do Norte
Brasil
UFRN
PÓS-GRADUAÇÃO EM ENGENHARIA QUÍMICA
publisher.none.fl_str_mv Universidade Federal do Rio Grande do Norte
Brasil
UFRN
PÓS-GRADUAÇÃO EM ENGENHARIA QUÍMICA
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFRN
instname:Universidade Federal do Rio Grande do Norte (UFRN)
instacron:UFRN
instname_str Universidade Federal do Rio Grande do Norte (UFRN)
instacron_str UFRN
institution UFRN
reponame_str Repositório Institucional da UFRN
collection Repositório Institucional da UFRN
repository.name.fl_str_mv Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN)
repository.mail.fl_str_mv repositorio@bczm.ufrn.br
_version_ 1855758873013518336