Análise do comportamento sobre impacto de compósitos de fibra de vidro-epóxi aditivados com agente de reparo

• Ano de defesa: 2024
• Autor(a) principal: Silva Júnior, Francisco de Assis da
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso aberto
• Idioma: por
• Instituição de defesa: Universidade Federal do Rio Grande do Norte; Brasil; UFRN; PROGRAMA DE PÓS-GRADUAÇÃO EM ENGENHARIA MECÂNICA
• Palavras-chave em Português: EMAA; Fibra de vidro-epóxi; Autorreparo; CNPQ::ENGENHARIAS::ENGENHARIA MECANICA
• Link de acesso: https://repositorio.ufrn.br/handle/123456789/63062

Polymeric glass-epoxy composites are widely recognized for their versatility, primarily due to their outstanding mechanical properties. However, when subjected to loads, service conditions, and environmental factors, they may develop microcracks that compromise these properties. The literature suggests that the addition of a thermally activated self-healing thermoplastic, such as polyethylene-co-methacrylic acid (EMAA), can help extend the service life of these laminates. It is worth considering the replacement of conventional glass fiberepoxy composites with thermoset matrices by self-healing composites, especially in conditions where they demonstrate superior practical performance. Thus, with the aim of contributing to academic research, this study analyzed the influence of EMAA in glass-epoxy prepreg laminates, investigating interlaminar shear strength (ILSS), damage propagation under low-velocity impact (drop-weight type), and post-impact ILSS, comparing the mechanical properties at 0% and 10% of the self-healing agent. The tests were conducted according to ASTM D 2344M (2022) and ISO 14130 (1997) standards for ILSS, and ASTM D 7136 (2020) for dropweight impact. Experimental results indicated that ILSS strength in samples with the self-healing agent remained practically unchanged, showing a reduction of only 3.6%, with a strength of (26.57 ± 0.37) MPa. Regarding the damage data, the samples without EMAA exhibited significant degradation of mechanical properties, with a 52.4% reduction in shear strength after 20 impacts, along with considerable damage propagation, reaching a delamination area of 1495 mm². In contrast, the samples with the self-healing agent showed better performance, with only a 26.2% reduction in shear strength, even after multiple impact cycles. The delamination area was drastically smaller, with values of 309 mm² after repair. The normalization analyses of residual strength indicated that the samples repaired with EMAA retained about 77% of the original strength, while the samples without the agent exhibited pronounced degradation. These results confirm that EMAA showed to be effective in limiting damage propagation and restoring some of the mechanical properties of fiberglass laminates.