Estudo da microestrutura do aço DP780 cortado por puncionamento em temperaturas ambiente e ariogênica

• Ano de defesa: 2023
• Autor(a) principal: Barbosa, Henrique Tomé
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso aberto
• Idioma: por
• Instituição de defesa: Universidade Federal do Rio Grande do Norte; Brasil; UFRN; PROGRAMA DE PÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAIS
• Palavras-chave em Português: Aço DP780; Borda de corte; Puncionamento; Criogenia; EBSD; CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA
• Link de acesso: https://repositorio.ufrn.br/handle/123456789/57491

Dual-phase steels (DP) are advanced high-strength steels (AHSS) used in construction of automotive body parts due to their high strength, formability and ability to absorb energy when deformed. They gained great importance since the Paris Agreement (2016), as their use, in place of conventional steels, makes vehicles lighter and less polluting. To constitute these automotive parts, the dual-phase steels undergo stamping processes, in which they are cut, pressed and folded, in order to compose the final shape of the desired part. During these processes, the quality of the cutting edge of these steels is a very important factor, as an edge with more and greater heterogeneity and defects can lead to failure of the part even during its manufacture. A more homogeneous cutting edge, with less voids and microcracks is necessary for the good formability of these materials. Aiming to present a method to improve the quality of the cutting edges of DP780 steel, the present work carried out a qualitative and quantitative study of the microstructures of cutting edges of this steel cut by punching at cryogenic and ambient temperatures and compared them, in order to verify their quality and homogeneity, as well as the amount of deformation. The analysis of the microstructures was performed using the Electron Backscatter Diffraction (EBSD) technique using a scanning electron microscope (SEM). It was observed that the localized refrigeration by liquid vapor is effective for the induction of brittle fracture in the DP780 dual-phase steel, extending the fractured region and decreasing the sheared area in the cut edges, diminishing plastic deformation in the surface and internal microstructure of the edge. Qualitative results showed the ability of this method to reduce plastic deformation on DP780 cutting edges by up to 37% when performed at cryogenic temperature (≤ -150 oC) and speed of 725 mm/s.