Síntese de Fischer-Tropsch sobre perovskitas LayCu0,4Fe0,6O3

Detalhes bibliográficos
Ano de defesa: 2010
Autor(a) principal: Souza, José Roberto de
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Tese
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal do Rio Grande do Norte
BR
UFRN
Programa de Pós-Graduação em Engenharia Química
Pesquisa e Desenvolvimento de Tecnologias Regionais
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
GTL
Link de acesso: https://repositorio.ufrn.br/jspui/handle/123456789/15905
Resumo: The current natural gas production of 52 Mm3d-1 and the large projects for its expansion has been setting new boundaries for the Brazilian industry of oil and gas. So far, one of the biggest challenges regards to the logistics for gas transportation from offshore fields. Therefore, the transformation of natural gas into gasoline, diesel and/or olefins via Fischer-Tropsch synthesis would be an alternative to this matter. In this work, the production of hydrocarbons by Fischer-Tropsch synthesis in a slurry reactor was investigated and a perovskite-type catalyst (LayCu0,4Fe0,6O3 ± d) was used with y varying from 0 to 1 on a molar basis. In addition, Nb2O5 support was also applied in order to observe the selectivity of the produced hydrocarbons by the Fischer-Tropsch process. It is shown that the hydrogen conversion was influenced by the support as well as the different phases of the samples. The kinetic results for the CO2 production suffered great influence with the introduction of the Nb2O5 support throughout the series of samples studied. The catalysts allowed obtaining welldefined cuts of hydrocarbons in the range of C1-C6 and C17-C28, and these results were clearly influenced by the support and the lanthanum content. The higher olefin/paraffin ratio obtained was 1.8 when using a non-supported perovskite with y equal to 0.8. This would indicate the suitability of using this material for the production of olefins
id UFRN_abb4c15a78fbafe550cdc8cc0c980cea
oai_identifier_str oai:repositorio.ufrn.br:123456789/15905
network_acronym_str UFRN
network_name_str Repositório Institucional da UFRN
repository_id_str
spelling Síntese de Fischer-Tropsch sobre perovskitas LayCu0,4Fe0,6O3GTLFischer-TropschPerovskitasOlefinasGás naturalGTLFischer-TropschPerovskiteOlefinsNatural gasCNPQ::ENGENHARIAS::ENGENHARIA QUIMICAThe current natural gas production of 52 Mm3d-1 and the large projects for its expansion has been setting new boundaries for the Brazilian industry of oil and gas. So far, one of the biggest challenges regards to the logistics for gas transportation from offshore fields. Therefore, the transformation of natural gas into gasoline, diesel and/or olefins via Fischer-Tropsch synthesis would be an alternative to this matter. In this work, the production of hydrocarbons by Fischer-Tropsch synthesis in a slurry reactor was investigated and a perovskite-type catalyst (LayCu0,4Fe0,6O3 ± d) was used with y varying from 0 to 1 on a molar basis. In addition, Nb2O5 support was also applied in order to observe the selectivity of the produced hydrocarbons by the Fischer-Tropsch process. It is shown that the hydrogen conversion was influenced by the support as well as the different phases of the samples. The kinetic results for the CO2 production suffered great influence with the introduction of the Nb2O5 support throughout the series of samples studied. The catalysts allowed obtaining welldefined cuts of hydrocarbons in the range of C1-C6 and C17-C28, and these results were clearly influenced by the support and the lanthanum content. The higher olefin/paraffin ratio obtained was 1.8 when using a non-supported perovskite with y equal to 0.8. This would indicate the suitability of using this material for the production of olefinsA produção atual de 52 milhões m³dia-1 de gás natural e os grandes projetos para esta expansão vem estabelecendo novas fronteiras para a indústria nacional de petróleo e gás, sendo um dos maiores desafios a logística para o transporte do gás oriundo de campos offshore. Uma alternativa seria usar o gás natural para a produção de gasolina, diesel e/ou olefinas através da síntese de Fischer-Tropsch. No desenvolvimento deste trabalho foi investigado a produção de hidrocarbonetos via síntese de Fischer-Tropsch em um reator slurry mediante uso de catalisadores do tipo perovskita, LayCu0,4Fe0,6O3±d, onde y sofreu variação de 0 até 1 em base molar. A síntese dos catalisadores levou em consideração o estudo da influência do teor de lantânio e do suporte (Nb2O5) na atividade e seletividade da reação de Fischer-Tropsch, objetivando a produção de hidrocarbonetos. As conversões de H2 foram sensivelmente influênciadas pela presença de fases existentes em cada amostra, assim como pelo suporte. Os resultados da cinética de produção de CO2 sofreram grandes influências com a introdução do suporte em toda a série das amostras produzidas. Os catalisadores empregados permitiram a obtenção de cortes bem definidos de hidrocarbonetos na faixa de C1-C6 e C17-C28, sendo estes resultados claramente influenciados pelo suporte e pela variação do teor de lantânio. A maior relação olefina/parafina obtida foi de 1,8 para a perovskita com y igual a 0,8 na amostra não suportada, viabilizando o uso deste material na produção de olefinasUniversidade Federal do Rio Grande do NorteBRUFRNPrograma de Pós-Graduação em Engenharia QuímicaPesquisa e Desenvolvimento de Tecnologias RegionaisMelo, Marcus Antônio de Freitashttp://lattes.cnpq.br/5381184161864484http://lattes.cnpq.br/5840621182000517Ruiz, Juan Alberto Chavezhttp://lattes.cnpq.br/5051286289341242Silva, Antonio Osimar Sousa dahttp://lattes.cnpq.br/5289388662589522Santos, Luiz Carlos Lobato doshttp://lattes.cnpq.br/8891045064075199Garnica, Alfredo Ismael Curbelohttp://lattes.cnpq.br/0257037690238235Ferreira, Sebastião Ribeirohttp://lattes.cnpq.br/7849019313801150Souza, José Roberto de2014-12-17T15:01:51Z2011-04-042014-12-17T15:01:51Z2010-07-30info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisapplication/pdfapplication/pdfSOUZA, José Roberto de. Síntese de Fischer-Tropsch sobre perovskitas LayCu0,4Fe0,6O3. 2010. 109 f. Tese (Doutorado em Pesquisa e Desenvolvimento de Tecnologias Regionais) - Universidade Federal do Rio Grande do Norte, Natal, 2010.https://repositorio.ufrn.br/jspui/handle/123456789/15905porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFRNinstname:Universidade Federal do Rio Grande do Norte (UFRN)instacron:UFRN2017-11-02T08:54:38Zoai:repositorio.ufrn.br:123456789/15905Repositório InstitucionalPUBhttp://repositorio.ufrn.br/oai/repositorio@bczm.ufrn.bropendoar:2017-11-02T08:54:38Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN)false
dc.title.none.fl_str_mv Síntese de Fischer-Tropsch sobre perovskitas LayCu0,4Fe0,6O3
title Síntese de Fischer-Tropsch sobre perovskitas LayCu0,4Fe0,6O3
spellingShingle Síntese de Fischer-Tropsch sobre perovskitas LayCu0,4Fe0,6O3
Souza, José Roberto de
GTL
Fischer-Tropsch
Perovskitas
Olefinas
Gás natural
GTL
Fischer-Tropsch
Perovskite
Olefins
Natural gas
CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA
title_short Síntese de Fischer-Tropsch sobre perovskitas LayCu0,4Fe0,6O3
title_full Síntese de Fischer-Tropsch sobre perovskitas LayCu0,4Fe0,6O3
title_fullStr Síntese de Fischer-Tropsch sobre perovskitas LayCu0,4Fe0,6O3
title_full_unstemmed Síntese de Fischer-Tropsch sobre perovskitas LayCu0,4Fe0,6O3
title_sort Síntese de Fischer-Tropsch sobre perovskitas LayCu0,4Fe0,6O3
author Souza, José Roberto de
author_facet Souza, José Roberto de
author_role author
dc.contributor.none.fl_str_mv Melo, Marcus Antônio de Freitas

http://lattes.cnpq.br/5381184161864484

http://lattes.cnpq.br/5840621182000517
Ruiz, Juan Alberto Chavez

http://lattes.cnpq.br/5051286289341242
Silva, Antonio Osimar Sousa da

http://lattes.cnpq.br/5289388662589522
Santos, Luiz Carlos Lobato dos

http://lattes.cnpq.br/8891045064075199
Garnica, Alfredo Ismael Curbelo

http://lattes.cnpq.br/0257037690238235
Ferreira, Sebastião Ribeiro

http://lattes.cnpq.br/7849019313801150
dc.contributor.author.fl_str_mv Souza, José Roberto de
dc.subject.por.fl_str_mv GTL
Fischer-Tropsch
Perovskitas
Olefinas
Gás natural
GTL
Fischer-Tropsch
Perovskite
Olefins
Natural gas
CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA
topic GTL
Fischer-Tropsch
Perovskitas
Olefinas
Gás natural
GTL
Fischer-Tropsch
Perovskite
Olefins
Natural gas
CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA
description The current natural gas production of 52 Mm3d-1 and the large projects for its expansion has been setting new boundaries for the Brazilian industry of oil and gas. So far, one of the biggest challenges regards to the logistics for gas transportation from offshore fields. Therefore, the transformation of natural gas into gasoline, diesel and/or olefins via Fischer-Tropsch synthesis would be an alternative to this matter. In this work, the production of hydrocarbons by Fischer-Tropsch synthesis in a slurry reactor was investigated and a perovskite-type catalyst (LayCu0,4Fe0,6O3 ± d) was used with y varying from 0 to 1 on a molar basis. In addition, Nb2O5 support was also applied in order to observe the selectivity of the produced hydrocarbons by the Fischer-Tropsch process. It is shown that the hydrogen conversion was influenced by the support as well as the different phases of the samples. The kinetic results for the CO2 production suffered great influence with the introduction of the Nb2O5 support throughout the series of samples studied. The catalysts allowed obtaining welldefined cuts of hydrocarbons in the range of C1-C6 and C17-C28, and these results were clearly influenced by the support and the lanthanum content. The higher olefin/paraffin ratio obtained was 1.8 when using a non-supported perovskite with y equal to 0.8. This would indicate the suitability of using this material for the production of olefins
publishDate 2010
dc.date.none.fl_str_mv 2010-07-30
2011-04-04
2014-12-17T15:01:51Z
2014-12-17T15:01:51Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/doctoralThesis
format doctoralThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv SOUZA, José Roberto de. Síntese de Fischer-Tropsch sobre perovskitas LayCu0,4Fe0,6O3. 2010. 109 f. Tese (Doutorado em Pesquisa e Desenvolvimento de Tecnologias Regionais) - Universidade Federal do Rio Grande do Norte, Natal, 2010.
https://repositorio.ufrn.br/jspui/handle/123456789/15905
identifier_str_mv SOUZA, José Roberto de. Síntese de Fischer-Tropsch sobre perovskitas LayCu0,4Fe0,6O3. 2010. 109 f. Tese (Doutorado em Pesquisa e Desenvolvimento de Tecnologias Regionais) - Universidade Federal do Rio Grande do Norte, Natal, 2010.
url https://repositorio.ufrn.br/jspui/handle/123456789/15905
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Universidade Federal do Rio Grande do Norte
BR
UFRN
Programa de Pós-Graduação em Engenharia Química
Pesquisa e Desenvolvimento de Tecnologias Regionais
publisher.none.fl_str_mv Universidade Federal do Rio Grande do Norte
BR
UFRN
Programa de Pós-Graduação em Engenharia Química
Pesquisa e Desenvolvimento de Tecnologias Regionais
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFRN
instname:Universidade Federal do Rio Grande do Norte (UFRN)
instacron:UFRN
instname_str Universidade Federal do Rio Grande do Norte (UFRN)
instacron_str UFRN
institution UFRN
reponame_str Repositório Institucional da UFRN
collection Repositório Institucional da UFRN
repository.name.fl_str_mv Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN)
repository.mail.fl_str_mv repositorio@bczm.ufrn.br
_version_ 1855758799416066048