Mecanismos de desgaste de poliuretano em ensaios de microabrasão
Ano de defesa: | 2006 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal do Rio Grande do Norte
|
Programa de Pós-Graduação: |
Programa de Pós-Graduação em Engenharia Mecânica
|
Departamento: |
Tecnologia de Materiais; Projetos Mecânicos; Termociências
|
País: |
BR
|
Palavras-chave em Português: | |
Palavras-chave em Inglês: | |
Área do conhecimento CNPq: | |
Link de acesso: | https://repositorio.ufrn.br/jspui/handle/123456789/15667 |
Resumo: | Wear mechanisms and thermal history of two non-conforming sliding surfaces was investigated in laboratory. A micro-abrasion testing setup was used but the traditional rotative sphere method was substituted by a cylindrical surface of revolution which included seven sharp angles varying between 15o to 180o. The micro-abrasion tests lead to the investigation on the polyurethane response at different contact pressures. For these turned counterfaces with and without heat treatment. Normal load and sliding speeds were changed. The sliding distance was fixed at 5 km in each test. The room and contact temperatures were measured during the tests. The polyurethane was characterized using tensile testing, hardness Shore A measurement, Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC) and Thermomechanical Analyze (TMA). The Vickers micro-hardness of the steel was measured before and after the heat treatment and the metallographic characterization was also carried out. Worn surface of polyurethane was analysed using Scanning Electron Microscope (SEM) and EDS (Electron Diffraction Scanning) microanalyses. Single pass scratch testing in polyurethane using indenters with different contact angles was also carried out. The scar morphology of the wear, the wear mechanism and the thermal response were analyzed in order to correlate the conditions imposed by the pressure-velocity pair to the materials in contact. Eight different wear mechanisms were identified on the polyurethane surface. It was found correlation between the temperature variation and the wear scar morphology. |
id |
UFRN_da040d99ba4d5b3a21aa8f382804ac48 |
---|---|
oai_identifier_str |
oai:https://repositorio.ufrn.br:123456789/15667 |
network_acronym_str |
UFRN |
network_name_str |
Repositório Institucional da UFRN |
repository_id_str |
|
spelling |
Silva, Ruthilene Catarine Lima dahttp://lattes.cnpq.br/3206952338356447Medeiros, João Telésforo Nóbrega de2014-12-17T14:58:12Z2006-11-282014-12-17T14:58:12Z2006-02-13SILVA, Ruthilene Catarine Lima da. Mecanismos de desgaste de poliuretano em ensaios de microabrasão. 2006. 129 f. Dissertação (Mestrado em Tecnologia de Materiais; Projetos Mecânicos; Termociências) - Universidade Federal do Rio Grande do Norte, Natal, 2006.https://repositorio.ufrn.br/jspui/handle/123456789/15667Wear mechanisms and thermal history of two non-conforming sliding surfaces was investigated in laboratory. A micro-abrasion testing setup was used but the traditional rotative sphere method was substituted by a cylindrical surface of revolution which included seven sharp angles varying between 15o to 180o. The micro-abrasion tests lead to the investigation on the polyurethane response at different contact pressures. For these turned counterfaces with and without heat treatment. Normal load and sliding speeds were changed. The sliding distance was fixed at 5 km in each test. The room and contact temperatures were measured during the tests. The polyurethane was characterized using tensile testing, hardness Shore A measurement, Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC) and Thermomechanical Analyze (TMA). The Vickers micro-hardness of the steel was measured before and after the heat treatment and the metallographic characterization was also carried out. Worn surface of polyurethane was analysed using Scanning Electron Microscope (SEM) and EDS (Electron Diffraction Scanning) microanalyses. Single pass scratch testing in polyurethane using indenters with different contact angles was also carried out. The scar morphology of the wear, the wear mechanism and the thermal response were analyzed in order to correlate the conditions imposed by the pressure-velocity pair to the materials in contact. Eight different wear mechanisms were identified on the polyurethane surface. It was found correlation between the temperature variation and the wear scar morphology.Os mecanismos de desgaste e a historia térmica de duas superfícies não-conformes foram investigados em laboratório. Um equipamento de ensaios de microabrasão foi usado, mas a configuração tradicional com esfera rotativa foi substituída por uma com superfície cilíndrica de revolução, na qual a geratriz incluiu sete formas com ângulos variando de 15o a 180o. Os ensaios de microabrasão foram conduzidos investigando-se a resposta do polímero a diferentes pressões de contato. Para isso, projetaram-se e foram torneados corpos antagonistas, tratados termicamente, ou não, lixados, ou não. Variou-se a carga normal e a velocidade de deslizamento. A distância de deslizamento foi fixada em 5 km ininterruptos em cada ensaio. As temperaturas de contato e ambiente foram medidas e registradas durante os ensaios. O poliuretano estudado foi caracterizado através de ensaios de tração, medidas de dureza Shore A, Análise Termogravimétrica (TGA), Calorimetria Diferencial Exploratória (DSC) e Análise Termomecânica (TMA). A Microdureza Vickers do aço foi medida antes e após o tratamento térmico, e a caracterização metalográfica realizada. A superfície desgastada do poliuretano foi analisada por microscopia eletrônica de varredura (MEV) e microanálise-EDS. O estudo foi complementado por ensaios esclerométricos de um único passe em poliuretano utilizando indentadores com diferentes ângulos de contato. A morfologia da cratera, os mecanismos de desgaste e a resposta térmica foram discutidos buscando-se correlacioná-los às solicitações impostas pelo par pressão-velocidade aos materiais em contato. Sete diferentes mecanismos de desgaste foram identificados na superfície do poliuretano. Encontrou-se correlação entre a variação da temperatura e a morfologia da cratera de desgaste.Coordenação de Aperfeiçoamento de Pessoal de Nível Superiorapplication/pdfporUniversidade Federal do Rio Grande do NortePrograma de Pós-Graduação em Engenharia MecânicaUFRNBRTecnologia de Materiais; Projetos Mecânicos; TermociênciasTribologiaDesgasteMicroabrasãoPoliuretanoTribologyWearMicroabrasionPolyurethaneCNPQ::ENGENHARIAS::ENGENHARIA MECANICAMecanismos de desgaste de poliuretano em ensaios de microabrasãoinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFRNinstname:Universidade Federal do Rio Grande do Norte (UFRN)instacron:UFRNORIGINALRuthileneCLS_DISSERT.pdfRuthileneCLS_DISSERT.pdfapplication/pdf4201582https://repositorio.ufrn.br/bitstream/123456789/15667/1/RuthileneCLS_DISSERT.pdf83d7d5d8e8ddecad728fc86f15439a42MD51TEXTRuthileneCLS_DISSERT.pdf.txtRuthileneCLS_DISSERT.pdf.txtExtracted texttext/plain208934https://repositorio.ufrn.br/bitstream/123456789/15667/6/RuthileneCLS_DISSERT.pdf.txt68638bc7b59682ed464e1b197115aaa9MD56THUMBNAILRuthileneCLS_DISSERT.pdf.jpgRuthileneCLS_DISSERT.pdf.jpgIM Thumbnailimage/jpeg1541https://repositorio.ufrn.br/bitstream/123456789/15667/7/RuthileneCLS_DISSERT.pdf.jpgde5b9a7ad8e729668a5dca3559fbaf83MD57123456789/156672017-11-01 23:31:21.215oai:https://repositorio.ufrn.br:123456789/15667Repositório de PublicaçõesPUBhttp://repositorio.ufrn.br/oai/opendoar:2017-11-02T02:31:21Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN)false |
dc.title.por.fl_str_mv |
Mecanismos de desgaste de poliuretano em ensaios de microabrasão |
title |
Mecanismos de desgaste de poliuretano em ensaios de microabrasão |
spellingShingle |
Mecanismos de desgaste de poliuretano em ensaios de microabrasão Silva, Ruthilene Catarine Lima da Tribologia Desgaste Microabrasão Poliuretano Tribology Wear Microabrasion Polyurethane CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
title_short |
Mecanismos de desgaste de poliuretano em ensaios de microabrasão |
title_full |
Mecanismos de desgaste de poliuretano em ensaios de microabrasão |
title_fullStr |
Mecanismos de desgaste de poliuretano em ensaios de microabrasão |
title_full_unstemmed |
Mecanismos de desgaste de poliuretano em ensaios de microabrasão |
title_sort |
Mecanismos de desgaste de poliuretano em ensaios de microabrasão |
author |
Silva, Ruthilene Catarine Lima da |
author_facet |
Silva, Ruthilene Catarine Lima da |
author_role |
author |
dc.contributor.authorID.por.fl_str_mv |
|
dc.contributor.advisorID.por.fl_str_mv |
|
dc.contributor.advisorLattes.por.fl_str_mv |
http://lattes.cnpq.br/3206952338356447 |
dc.contributor.author.fl_str_mv |
Silva, Ruthilene Catarine Lima da |
dc.contributor.advisor1.fl_str_mv |
Medeiros, João Telésforo Nóbrega de |
contributor_str_mv |
Medeiros, João Telésforo Nóbrega de |
dc.subject.por.fl_str_mv |
Tribologia Desgaste Microabrasão Poliuretano |
topic |
Tribologia Desgaste Microabrasão Poliuretano Tribology Wear Microabrasion Polyurethane CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
dc.subject.eng.fl_str_mv |
Tribology Wear Microabrasion Polyurethane |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
description |
Wear mechanisms and thermal history of two non-conforming sliding surfaces was investigated in laboratory. A micro-abrasion testing setup was used but the traditional rotative sphere method was substituted by a cylindrical surface of revolution which included seven sharp angles varying between 15o to 180o. The micro-abrasion tests lead to the investigation on the polyurethane response at different contact pressures. For these turned counterfaces with and without heat treatment. Normal load and sliding speeds were changed. The sliding distance was fixed at 5 km in each test. The room and contact temperatures were measured during the tests. The polyurethane was characterized using tensile testing, hardness Shore A measurement, Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC) and Thermomechanical Analyze (TMA). The Vickers micro-hardness of the steel was measured before and after the heat treatment and the metallographic characterization was also carried out. Worn surface of polyurethane was analysed using Scanning Electron Microscope (SEM) and EDS (Electron Diffraction Scanning) microanalyses. Single pass scratch testing in polyurethane using indenters with different contact angles was also carried out. The scar morphology of the wear, the wear mechanism and the thermal response were analyzed in order to correlate the conditions imposed by the pressure-velocity pair to the materials in contact. Eight different wear mechanisms were identified on the polyurethane surface. It was found correlation between the temperature variation and the wear scar morphology. |
publishDate |
2006 |
dc.date.available.fl_str_mv |
2006-11-28 2014-12-17T14:58:12Z |
dc.date.issued.fl_str_mv |
2006-02-13 |
dc.date.accessioned.fl_str_mv |
2014-12-17T14:58:12Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
SILVA, Ruthilene Catarine Lima da. Mecanismos de desgaste de poliuretano em ensaios de microabrasão. 2006. 129 f. Dissertação (Mestrado em Tecnologia de Materiais; Projetos Mecânicos; Termociências) - Universidade Federal do Rio Grande do Norte, Natal, 2006. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufrn.br/jspui/handle/123456789/15667 |
identifier_str_mv |
SILVA, Ruthilene Catarine Lima da. Mecanismos de desgaste de poliuretano em ensaios de microabrasão. 2006. 129 f. Dissertação (Mestrado em Tecnologia de Materiais; Projetos Mecânicos; Termociências) - Universidade Federal do Rio Grande do Norte, Natal, 2006. |
url |
https://repositorio.ufrn.br/jspui/handle/123456789/15667 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal do Rio Grande do Norte |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Mecânica |
dc.publisher.initials.fl_str_mv |
UFRN |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Tecnologia de Materiais; Projetos Mecânicos; Termociências |
publisher.none.fl_str_mv |
Universidade Federal do Rio Grande do Norte |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFRN instname:Universidade Federal do Rio Grande do Norte (UFRN) instacron:UFRN |
instname_str |
Universidade Federal do Rio Grande do Norte (UFRN) |
instacron_str |
UFRN |
institution |
UFRN |
reponame_str |
Repositório Institucional da UFRN |
collection |
Repositório Institucional da UFRN |
bitstream.url.fl_str_mv |
https://repositorio.ufrn.br/bitstream/123456789/15667/1/RuthileneCLS_DISSERT.pdf https://repositorio.ufrn.br/bitstream/123456789/15667/6/RuthileneCLS_DISSERT.pdf.txt https://repositorio.ufrn.br/bitstream/123456789/15667/7/RuthileneCLS_DISSERT.pdf.jpg |
bitstream.checksum.fl_str_mv |
83d7d5d8e8ddecad728fc86f15439a42 68638bc7b59682ed464e1b197115aaa9 de5b9a7ad8e729668a5dca3559fbaf83 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN) |
repository.mail.fl_str_mv |
|
_version_ |
1797777667341156352 |