Recuperação seletiva de índio a partir da técnica de extração em fase sólida utilizando nanofibras com DEHPA
Ano de defesa: | 2019 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | , |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal de Santa Maria
Centro de Tecnologia |
Programa de Pós-Graduação: |
Programa de Pós-Graduação em Engenharia Química
|
Departamento: |
Engenharia Química
|
País: |
Brasil
|
Palavras-chave em Português: | |
Palavras-chave em Inglês: | |
Área do conhecimento CNPq: | |
Link de acesso: | http://repositorio.ufsm.br/handle/1/21014 |
Resumo: | The main objective of this work was to develop a nanomaterial able to selectively extract and recover indium (In) from obsolete cell phone LCD screens. For this, Nylon 6 nanofibers were produced and modified with di-(2-ethylhexyl)phosphoric acid (DEHPA) for application in the solid-phase extraction of In. The best extraction conditions for concentration of In were 30% DEHPA, pH 0.5, 7.5 min contact time, and S:L ratio of 1:300. In this step, an In extraction efficiency of around 74% was obtained. In stripping steps, an efficiency of 92% was achieved using 1.5 M HCl, S:L ratio of 1:20, and 5 min contact time. Under the best extraction and stripping conditions, it was possible to obtain up to 6-fold concentration of In, compared to the initial concentration. In addition, the nanofibers were evaluated in terms of their stability and capacity for reuse, which showed that there was no significant loss of DEHPA and that the extraction efficiency remained almost constant. The findings demonstrated the possibility of using the Nylon 6/DEHPA nanofibers in a highly efficient extraction/stripping procedure for the selective recovery of In and Sn, with reduced environmental impacts. |
id |
UFSM-20_21f926fc77bb1b79d9e7d7650293ac4a |
---|---|
oai_identifier_str |
oai:repositorio.ufsm.br:1/21014 |
network_acronym_str |
UFSM-20 |
network_name_str |
Manancial - Repositório Digital da UFSM |
repository_id_str |
|
spelling |
2021-05-31T18:48:03Z2021-05-31T18:48:03Z2019-02-21http://repositorio.ufsm.br/handle/1/21014The main objective of this work was to develop a nanomaterial able to selectively extract and recover indium (In) from obsolete cell phone LCD screens. For this, Nylon 6 nanofibers were produced and modified with di-(2-ethylhexyl)phosphoric acid (DEHPA) for application in the solid-phase extraction of In. The best extraction conditions for concentration of In were 30% DEHPA, pH 0.5, 7.5 min contact time, and S:L ratio of 1:300. In this step, an In extraction efficiency of around 74% was obtained. In stripping steps, an efficiency of 92% was achieved using 1.5 M HCl, S:L ratio of 1:20, and 5 min contact time. Under the best extraction and stripping conditions, it was possible to obtain up to 6-fold concentration of In, compared to the initial concentration. In addition, the nanofibers were evaluated in terms of their stability and capacity for reuse, which showed that there was no significant loss of DEHPA and that the extraction efficiency remained almost constant. The findings demonstrated the possibility of using the Nylon 6/DEHPA nanofibers in a highly efficient extraction/stripping procedure for the selective recovery of In and Sn, with reduced environmental impacts.O principal objetivo deste trabalho foi desenvolver um nanomaterial capaz de extrair e recuperar seletivamente o índio (In) presente nas telas de LCD de celulares obsoletos. Para este propósito, as nanofibras de Nylon 6 foram desenvolvidas e modificadas com ácido di-(2- etilhexil) fosfórico (DEHPA), para aplicação na extração em fase sólida de In. Os resultados mostraram que as melhores condições de extração para a concentração de In foram em 30% de DEHPA, pH 0,5, tempo de contato de 7,5 min e uma relação S:L de 1:300. Nesta etapa, a eficiência de extração atingiu cerca de 74% para In nas soluções sintéticas. Da mesma forma, nas etapas de reextração foi possível alcançar uma eficiência de 92% para uma concentração de HCl de 1,5 M, relação S:L de 1:20 e tempo de contato de 5 min. A partir das melhores condições de extração e reextração foi possível concentrar o In em até seis vezes, comparado à concentração inicial. Além disso, as nanofibras foram avaliadas quanto à estabilidade e capacidade de reuso, observando que não houve perda significativa de DEHPA, mantendo a eficiência de extração praticamente constante. Isto mostra a possibilidade de aplicação das nanofibras de Nylon 6/DEHPA de uma forma menos agressiva ao meio ambiente e com altas eficiências de extração/reextração na recuperação seletiva de In e Sn.porUniversidade Federal de Santa MariaCentro de TecnologiaPrograma de Pós-Graduação em Engenharia QuímicaUFSMBrasilEngenharia QuímicaAttribution-NonCommercial-NoDerivatives 4.0 Internationalhttp://creativecommons.org/licenses/by-nc-nd/4.0/info:eu-repo/semantics/openAccessNanofibras poliméricasExtração em fase sólidaÍndioForcespinning®Reciclagem de resíduosPolymeric nanofibersSolid-phase extractionIndiumCentrifugal spinningWastes recyclingCNPQ::ENGENHARIAS::ENGENHARIA QUIMICARecuperação seletiva de índio a partir da técnica de extração em fase sólida utilizando nanofibras com DEHPASelective recovery of indium from lcd screens using solidphase extraction onto nanofibers with DEHPAinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisTanabe, Eduardo Hiromitsuhttp://lattes.cnpq.br/9778700143605069Bertuol, Daniel AssumpçãoXXXXXXXXXXXXXXWenzel, Bruno MünchenXXXXXXXXXXXXXXXSilvestri, SiaraXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXCadore, Jéssica Stefanello300600000006600b1b7f60b-aaa2-4374-9587-545c489aacb96e6a452d-bb71-4bb8-8680-cb5a8f37e775fcabaa51-1ad1-439b-b057-9430cfe88209401d6047-a055-4bdd-bb9f-c4b571eb178dc44d8e54-9e66-4b77-8ab1-2e818e0c24a7reponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSMORIGINALDIS_PPGEQ_2019_CADORE_JESSICA.pdfDIS_PPGEQ_2019_CADORE_JESSICA.pdfDissertação de Mestradoapplication/pdf1448630http://repositorio.ufsm.br/bitstream/1/21014/1/DIS_PPGEQ_2019_CADORE_JESSICA.pdf4142e942bf2c6f453b93bb448c9ef50dMD51CC-LICENSElicense_rdflicense_rdfapplication/rdf+xml; charset=utf-8805http://repositorio.ufsm.br/bitstream/1/21014/2/license_rdf4460e5956bc1d1639be9ae6146a50347MD52LICENSElicense.txtlicense.txttext/plain; charset=utf-816http://repositorio.ufsm.br/bitstream/1/21014/3/license.txtf8fcb28efb1c8cf0dc096bec902bf4c4MD53TEXTDIS_PPGEQ_2019_CADORE_JESSICA.pdf.txtDIS_PPGEQ_2019_CADORE_JESSICA.pdf.txtExtracted texttext/plain158285http://repositorio.ufsm.br/bitstream/1/21014/4/DIS_PPGEQ_2019_CADORE_JESSICA.pdf.txtd00c248ef2a92a357c2ece411d23601fMD54THUMBNAILDIS_PPGEQ_2019_CADORE_JESSICA.pdf.jpgDIS_PPGEQ_2019_CADORE_JESSICA.pdf.jpgIM Thumbnailimage/jpeg4420http://repositorio.ufsm.br/bitstream/1/21014/5/DIS_PPGEQ_2019_CADORE_JESSICA.pdf.jpg7b1476880f439e718cad845660878018MD551/210142021-06-01 03:01:40.273oai:repositorio.ufsm.br:1/21014Q3JlYXRpdmUgQ29tbW9ucw==Repositório Institucionalhttp://repositorio.ufsm.br/PUBhttp://repositorio.ufsm.br/oai/requestopendoar:39132021-06-01T06:01:40Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false |
dc.title.por.fl_str_mv |
Recuperação seletiva de índio a partir da técnica de extração em fase sólida utilizando nanofibras com DEHPA |
dc.title.alternative.eng.fl_str_mv |
Selective recovery of indium from lcd screens using solidphase extraction onto nanofibers with DEHPA |
title |
Recuperação seletiva de índio a partir da técnica de extração em fase sólida utilizando nanofibras com DEHPA |
spellingShingle |
Recuperação seletiva de índio a partir da técnica de extração em fase sólida utilizando nanofibras com DEHPA Cadore, Jéssica Stefanello Nanofibras poliméricas Extração em fase sólida Índio Forcespinning® Reciclagem de resíduos Polymeric nanofibers Solid-phase extraction Indium Centrifugal spinning Wastes recycling CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA |
title_short |
Recuperação seletiva de índio a partir da técnica de extração em fase sólida utilizando nanofibras com DEHPA |
title_full |
Recuperação seletiva de índio a partir da técnica de extração em fase sólida utilizando nanofibras com DEHPA |
title_fullStr |
Recuperação seletiva de índio a partir da técnica de extração em fase sólida utilizando nanofibras com DEHPA |
title_full_unstemmed |
Recuperação seletiva de índio a partir da técnica de extração em fase sólida utilizando nanofibras com DEHPA |
title_sort |
Recuperação seletiva de índio a partir da técnica de extração em fase sólida utilizando nanofibras com DEHPA |
author |
Cadore, Jéssica Stefanello |
author_facet |
Cadore, Jéssica Stefanello |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Tanabe, Eduardo Hiromitsu |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/9778700143605069 |
dc.contributor.advisor-co1.fl_str_mv |
Bertuol, Daniel Assumpção |
dc.contributor.advisor-co1Lattes.fl_str_mv |
XXXXXXXXXXXXXX |
dc.contributor.referee1.fl_str_mv |
Wenzel, Bruno München |
dc.contributor.referee1Lattes.fl_str_mv |
XXXXXXXXXXXXXXX |
dc.contributor.referee2.fl_str_mv |
Silvestri, Siara |
dc.contributor.referee2Lattes.fl_str_mv |
XXXXXXXXXXXXXX |
dc.contributor.authorLattes.fl_str_mv |
XXXXXXXXXXXXXXXXXXXXXX |
dc.contributor.author.fl_str_mv |
Cadore, Jéssica Stefanello |
contributor_str_mv |
Tanabe, Eduardo Hiromitsu Bertuol, Daniel Assumpção Wenzel, Bruno München Silvestri, Siara |
dc.subject.por.fl_str_mv |
Nanofibras poliméricas Extração em fase sólida Índio Forcespinning® Reciclagem de resíduos |
topic |
Nanofibras poliméricas Extração em fase sólida Índio Forcespinning® Reciclagem de resíduos Polymeric nanofibers Solid-phase extraction Indium Centrifugal spinning Wastes recycling CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA |
dc.subject.eng.fl_str_mv |
Polymeric nanofibers Solid-phase extraction Indium Centrifugal spinning Wastes recycling |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA |
description |
The main objective of this work was to develop a nanomaterial able to selectively extract and recover indium (In) from obsolete cell phone LCD screens. For this, Nylon 6 nanofibers were produced and modified with di-(2-ethylhexyl)phosphoric acid (DEHPA) for application in the solid-phase extraction of In. The best extraction conditions for concentration of In were 30% DEHPA, pH 0.5, 7.5 min contact time, and S:L ratio of 1:300. In this step, an In extraction efficiency of around 74% was obtained. In stripping steps, an efficiency of 92% was achieved using 1.5 M HCl, S:L ratio of 1:20, and 5 min contact time. Under the best extraction and stripping conditions, it was possible to obtain up to 6-fold concentration of In, compared to the initial concentration. In addition, the nanofibers were evaluated in terms of their stability and capacity for reuse, which showed that there was no significant loss of DEHPA and that the extraction efficiency remained almost constant. The findings demonstrated the possibility of using the Nylon 6/DEHPA nanofibers in a highly efficient extraction/stripping procedure for the selective recovery of In and Sn, with reduced environmental impacts. |
publishDate |
2019 |
dc.date.issued.fl_str_mv |
2019-02-21 |
dc.date.accessioned.fl_str_mv |
2021-05-31T18:48:03Z |
dc.date.available.fl_str_mv |
2021-05-31T18:48:03Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://repositorio.ufsm.br/handle/1/21014 |
url |
http://repositorio.ufsm.br/handle/1/21014 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.cnpq.fl_str_mv |
300600000006 |
dc.relation.confidence.fl_str_mv |
600 |
dc.relation.authority.fl_str_mv |
b1b7f60b-aaa2-4374-9587-545c489aacb9 6e6a452d-bb71-4bb8-8680-cb5a8f37e775 fcabaa51-1ad1-439b-b057-9430cfe88209 401d6047-a055-4bdd-bb9f-c4b571eb178d c44d8e54-9e66-4b77-8ab1-2e818e0c24a7 |
dc.rights.driver.fl_str_mv |
Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ |
eu_rights_str_mv |
openAccess |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria Centro de Tecnologia |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Química |
dc.publisher.initials.fl_str_mv |
UFSM |
dc.publisher.country.fl_str_mv |
Brasil |
dc.publisher.department.fl_str_mv |
Engenharia Química |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria Centro de Tecnologia |
dc.source.none.fl_str_mv |
reponame:Manancial - Repositório Digital da UFSM instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Manancial - Repositório Digital da UFSM |
collection |
Manancial - Repositório Digital da UFSM |
bitstream.url.fl_str_mv |
http://repositorio.ufsm.br/bitstream/1/21014/1/DIS_PPGEQ_2019_CADORE_JESSICA.pdf http://repositorio.ufsm.br/bitstream/1/21014/2/license_rdf http://repositorio.ufsm.br/bitstream/1/21014/3/license.txt http://repositorio.ufsm.br/bitstream/1/21014/4/DIS_PPGEQ_2019_CADORE_JESSICA.pdf.txt http://repositorio.ufsm.br/bitstream/1/21014/5/DIS_PPGEQ_2019_CADORE_JESSICA.pdf.jpg |
bitstream.checksum.fl_str_mv |
4142e942bf2c6f453b93bb448c9ef50d 4460e5956bc1d1639be9ae6146a50347 f8fcb28efb1c8cf0dc096bec902bf4c4 d00c248ef2a92a357c2ece411d23601f 7b1476880f439e718cad845660878018 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 MD5 MD5 |
repository.name.fl_str_mv |
Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
|
_version_ |
1801224063660589056 |