Influência do tipo de argamassamento na resistência à compressão de pequenas paredes de alvenaria estrutural cerâmica
Ano de defesa: | 2007 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | , |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal de Santa Maria
|
Programa de Pós-Graduação: |
Programa de Pós-Graduação em Engenharia Civil
|
Departamento: |
Engenharia Civil
|
País: |
BR
|
Palavras-chave em Português: | |
Palavras-chave em Inglês: | |
Área do conhecimento CNPq: | |
Link de acesso: | http://repositorio.ufsm.br/handle/1/7887 |
Resumo: | The present work has as its main objective to analyze the influence of the mortar bedding in the resistance to compression of small structure masonry walls. For this study were used two types of ceramic blocks (bulk wall blocks and hollow wall blocks), three types of mortar (2 Mpa, 4 Mpa and 10 Mpa) and two types of mortar bedding: whole bedding when the blocks are bedded with mortar in all contact surfaces and longitudinal bedding when the blocks are bedded with only two longitudinal lines (external thickness of the block). Two types dos blocks and mortar were individually characterized through various specific norms tests and afterwards 72 small walls were built. The small walls were built with the pattern dimension of 140 mm x 450 mm x 900 mm being 4 rows in height + u low channel length of one and a half blocks and width of one block. The blocks at the extremities of the walls were already mounted bathed in a cement paste. The analyses of the results show that for the 2 Mpa mortar, bulk wall block and whole bedding the average resistance is 4.68 Mpa and for the 10 Mpa mortar considering the same conditions the average resistance increases to 6.57 Mpa (40.4%). For the 2 Mpa mortar, hollow wall blocks and longitudinal mortar bedding the average resistance is 2.9 Mpa and for the 10 Mpa mortar, considering the same conditions the average resistance increased to 3.33 Mpa (14.8%) |
id |
UFSM-20_2d2f4528dfddefa0d331f5edb3614bb3 |
---|---|
oai_identifier_str |
oai:repositorio.ufsm.br:1/7887 |
network_acronym_str |
UFSM-20 |
network_name_str |
Manancial - Repositório Digital da UFSM |
repository_id_str |
|
spelling |
2007-07-102007-07-102007-02-28PASQUALI, Ivair. Influence of the type of mortar bedding to the compretion resistence of small structure mansonry walls. 2007. 140 f. Dissertação (Mestrado em Engenharia Civil) - Universidade Federal de Santa Maria, Santa Maria, 2007.http://repositorio.ufsm.br/handle/1/7887The present work has as its main objective to analyze the influence of the mortar bedding in the resistance to compression of small structure masonry walls. For this study were used two types of ceramic blocks (bulk wall blocks and hollow wall blocks), three types of mortar (2 Mpa, 4 Mpa and 10 Mpa) and two types of mortar bedding: whole bedding when the blocks are bedded with mortar in all contact surfaces and longitudinal bedding when the blocks are bedded with only two longitudinal lines (external thickness of the block). Two types dos blocks and mortar were individually characterized through various specific norms tests and afterwards 72 small walls were built. The small walls were built with the pattern dimension of 140 mm x 450 mm x 900 mm being 4 rows in height + u low channel length of one and a half blocks and width of one block. The blocks at the extremities of the walls were already mounted bathed in a cement paste. The analyses of the results show that for the 2 Mpa mortar, bulk wall block and whole bedding the average resistance is 4.68 Mpa and for the 10 Mpa mortar considering the same conditions the average resistance increases to 6.57 Mpa (40.4%). For the 2 Mpa mortar, hollow wall blocks and longitudinal mortar bedding the average resistance is 2.9 Mpa and for the 10 Mpa mortar, considering the same conditions the average resistance increased to 3.33 Mpa (14.8%)O presente trabalho tem com objetivo principal analisar a influência do tipo de argamassamento na resistência à compressão de pequenas paredes de alvenaria estrutural cerâmica. Para o estudo, foram utilizados dois tipos de blocos cerâmicos (paredes maciças e paredes vazadas), três tipos de argamassa (2, 4 e 10 MPa) e dois tipos argamassamento: pleno quando os blocos são assentados com argamassa em todas as suas paredes (superfície de contato) e longitudinal quando o bloco é assentado com argamassa colocada somente em dois filetes longitudinais (paredinhas externas do bloco). Os tipos de blocos e de argamassas foram caracterizados individualmente através de diversos ensaios específicos de norma e posteriormente foram confeccionadas de 72 pequenas paredes. As pequenas paredes tinham dimensões 140 mm x 450 mm x 900 mm sendo: altura de 4 fiadas + 1 canaleta u baixa de 9 cm comprimento de 1 bloco e meio largura de um bloco. Os blocos das extremidades das paredes foram montados já capeados com pasta de cimento. A análise dos resultados mostrou que, para a argamassa de 2 MPa, bloco de paredes maciças e argamassamento pleno, a resistência média é de 4,68 MPa e, para a argamassa de 10 MPa, mantendose as demais condições, a resistência média aumenta para 6,57 MPa (40,4%). Já para a argamassa de 2 MPa , bloco de paredes maciças e argamassamento longitudinal, a resistência média é de 2,90 MPa e, para a argamassa de 10 MPa, mantendose as demais condições, a resistência média aumenta para 3,33 MPa (14,8%)application/pdfporUniversidade Federal de Santa MariaPrograma de Pós-Graduação em Engenharia CivilUFSMBREngenharia CivilAlvenaria estruturalArgamassaAssentamentoBloco cerâmicoPequenas paredesStructural masonryMortarMortar beddingCeramic blockSmall wallsCNPQ::ENGENHARIAS::ENGENHARIA CIVILInfluência do tipo de argamassamento na resistência à compressão de pequenas paredes de alvenaria estrutural cerâmicaInfluence of the type of mortar bedding to the compretion resistence of small structure mansonry wallsinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisSoares, José Mario Doleyshttp://lattes.cnpq.br/2986137592706630Rizzatti, Eduardohttp://lattes.cnpq.br/2907271596071103Ramires, Marcus Vinicius Veledahttp://lattes.cnpq.br/5038681211194894http://lattes.cnpq.br/9466888072604150Pasquali, Ivair30010000000340030030030030040aa1229-abdc-489f-b6d9-e379d072dc502985d045-9600-421c-957f-0f3bfa2a081f5a9d378e-c0b5-47a1-afdf-10b20a35d3ca1b6e8b99-4951-4ae9-9455-b4fd6117a2ebinfo:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSMORIGINALIvair.pdfapplication/pdf12793390http://repositorio.ufsm.br/bitstream/1/7887/1/Ivair.pdfe2549283549c40eac43dd42cab3c9b68MD51TEXTIvair.pdf.txtIvair.pdf.txtExtracted texttext/plain233869http://repositorio.ufsm.br/bitstream/1/7887/2/Ivair.pdf.txt25e908cd1af1f697290666cd9773165bMD52THUMBNAILIvair.pdf.jpgIvair.pdf.jpgIM Thumbnailimage/jpeg5106http://repositorio.ufsm.br/bitstream/1/7887/3/Ivair.pdf.jpg6b1f3e58b9448fb10ba6a71b4af726adMD531/78872023-02-01 15:16:43.863oai:repositorio.ufsm.br:1/7887Repositório Institucionalhttp://repositorio.ufsm.br/PUBhttp://repositorio.ufsm.br/oai/requestopendoar:39132023-02-01T18:16:43Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false |
dc.title.por.fl_str_mv |
Influência do tipo de argamassamento na resistência à compressão de pequenas paredes de alvenaria estrutural cerâmica |
dc.title.alternative.eng.fl_str_mv |
Influence of the type of mortar bedding to the compretion resistence of small structure mansonry walls |
title |
Influência do tipo de argamassamento na resistência à compressão de pequenas paredes de alvenaria estrutural cerâmica |
spellingShingle |
Influência do tipo de argamassamento na resistência à compressão de pequenas paredes de alvenaria estrutural cerâmica Pasquali, Ivair Alvenaria estrutural Argamassa Assentamento Bloco cerâmico Pequenas paredes Structural masonry Mortar Mortar bedding Ceramic block Small walls CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
title_short |
Influência do tipo de argamassamento na resistência à compressão de pequenas paredes de alvenaria estrutural cerâmica |
title_full |
Influência do tipo de argamassamento na resistência à compressão de pequenas paredes de alvenaria estrutural cerâmica |
title_fullStr |
Influência do tipo de argamassamento na resistência à compressão de pequenas paredes de alvenaria estrutural cerâmica |
title_full_unstemmed |
Influência do tipo de argamassamento na resistência à compressão de pequenas paredes de alvenaria estrutural cerâmica |
title_sort |
Influência do tipo de argamassamento na resistência à compressão de pequenas paredes de alvenaria estrutural cerâmica |
author |
Pasquali, Ivair |
author_facet |
Pasquali, Ivair |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Soares, José Mario Doleys |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/2986137592706630 |
dc.contributor.referee1.fl_str_mv |
Rizzatti, Eduardo |
dc.contributor.referee1Lattes.fl_str_mv |
http://lattes.cnpq.br/2907271596071103 |
dc.contributor.referee2.fl_str_mv |
Ramires, Marcus Vinicius Veleda |
dc.contributor.referee2Lattes.fl_str_mv |
http://lattes.cnpq.br/5038681211194894 |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/9466888072604150 |
dc.contributor.author.fl_str_mv |
Pasquali, Ivair |
contributor_str_mv |
Soares, José Mario Doleys Rizzatti, Eduardo Ramires, Marcus Vinicius Veleda |
dc.subject.por.fl_str_mv |
Alvenaria estrutural Argamassa Assentamento Bloco cerâmico Pequenas paredes |
topic |
Alvenaria estrutural Argamassa Assentamento Bloco cerâmico Pequenas paredes Structural masonry Mortar Mortar bedding Ceramic block Small walls CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
dc.subject.eng.fl_str_mv |
Structural masonry Mortar Mortar bedding Ceramic block Small walls |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
description |
The present work has as its main objective to analyze the influence of the mortar bedding in the resistance to compression of small structure masonry walls. For this study were used two types of ceramic blocks (bulk wall blocks and hollow wall blocks), three types of mortar (2 Mpa, 4 Mpa and 10 Mpa) and two types of mortar bedding: whole bedding when the blocks are bedded with mortar in all contact surfaces and longitudinal bedding when the blocks are bedded with only two longitudinal lines (external thickness of the block). Two types dos blocks and mortar were individually characterized through various specific norms tests and afterwards 72 small walls were built. The small walls were built with the pattern dimension of 140 mm x 450 mm x 900 mm being 4 rows in height + u low channel length of one and a half blocks and width of one block. The blocks at the extremities of the walls were already mounted bathed in a cement paste. The analyses of the results show that for the 2 Mpa mortar, bulk wall block and whole bedding the average resistance is 4.68 Mpa and for the 10 Mpa mortar considering the same conditions the average resistance increases to 6.57 Mpa (40.4%). For the 2 Mpa mortar, hollow wall blocks and longitudinal mortar bedding the average resistance is 2.9 Mpa and for the 10 Mpa mortar, considering the same conditions the average resistance increased to 3.33 Mpa (14.8%) |
publishDate |
2007 |
dc.date.accessioned.fl_str_mv |
2007-07-10 |
dc.date.available.fl_str_mv |
2007-07-10 |
dc.date.issued.fl_str_mv |
2007-02-28 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
PASQUALI, Ivair. Influence of the type of mortar bedding to the compretion resistence of small structure mansonry walls. 2007. 140 f. Dissertação (Mestrado em Engenharia Civil) - Universidade Federal de Santa Maria, Santa Maria, 2007. |
dc.identifier.uri.fl_str_mv |
http://repositorio.ufsm.br/handle/1/7887 |
identifier_str_mv |
PASQUALI, Ivair. Influence of the type of mortar bedding to the compretion resistence of small structure mansonry walls. 2007. 140 f. Dissertação (Mestrado em Engenharia Civil) - Universidade Federal de Santa Maria, Santa Maria, 2007. |
url |
http://repositorio.ufsm.br/handle/1/7887 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.cnpq.fl_str_mv |
300100000003 |
dc.relation.confidence.fl_str_mv |
400 300 300 300 300 |
dc.relation.authority.fl_str_mv |
40aa1229-abdc-489f-b6d9-e379d072dc50 2985d045-9600-421c-957f-0f3bfa2a081f 5a9d378e-c0b5-47a1-afdf-10b20a35d3ca 1b6e8b99-4951-4ae9-9455-b4fd6117a2eb |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Civil |
dc.publisher.initials.fl_str_mv |
UFSM |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Engenharia Civil |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria |
dc.source.none.fl_str_mv |
reponame:Manancial - Repositório Digital da UFSM instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Manancial - Repositório Digital da UFSM |
collection |
Manancial - Repositório Digital da UFSM |
bitstream.url.fl_str_mv |
http://repositorio.ufsm.br/bitstream/1/7887/1/Ivair.pdf http://repositorio.ufsm.br/bitstream/1/7887/2/Ivair.pdf.txt http://repositorio.ufsm.br/bitstream/1/7887/3/Ivair.pdf.jpg |
bitstream.checksum.fl_str_mv |
e2549283549c40eac43dd42cab3c9b68 25e908cd1af1f697290666cd9773165b 6b1f3e58b9448fb10ba6a71b4af726ad |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
|
_version_ |
1794524434155962368 |