Análise de transitórios eletromagnéticos de alta frequência em transformadores através de modelagem caixa branca e medições experimentais

Detalhes bibliográficos
Ano de defesa: 2026
Autor(a) principal: Stochero, Mateus Paiva
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal de Santa Maria
Brasil
UFSM
Programa de Pós-Graduação em Engenharia Elétrica
Centro de Tecnologia
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://repositorio.ufsm.br/handle/1/39283
Resumo: In the power system, power transformers play a fundamental role due to their operational importance, high investment cost, and function as the link between power generation and electricity consumption. In this context, understanding the effects of high-frequency electromagnetic transients is essential to ensure the reliability and robustness of these devices during the design stage. To support risk assessment and resource optimization in transformer design, a high-frequency white-box model is proposed for the winding types most commonly used in high-voltage transformers: continuous, intershield, and interleaved coils, considering the conventional standard terminal arrangement. The model was evaluated through a transformer prototype composed of a tank, a wooden core covered with aluminum sheets, and representative windings. The system was subjected to repetitive impulse excitation, and its responses to high-frequency transients were recorded using an oscilloscope. A distinctive feature of this study is the strong dimensional and constructive similarity between the prototype and actual power transformers, as well as the presence of multiple measurement points distributed along the windings. This configuration enabled the analysis of transient voltage distributions at different winding locations and allowed a direct comparison between experimental and simulated results. To ensure measurement reliability, tests were conducted to evaluate the influence of measurement cables and connections on the system response. The transformer windings were represented by an equivalent RLC network based on methodologies widely discussed in CIGRÉ technical publications. The results demonstrate that the proposed model satisfactorily reproduces the experimentally measured responses, particularly the first voltage peak, which is considered a critical parameter for assessing the dielectric robustness of the design. Furthermore, the model exhibited a conservative behavior throughout the transient response, contributing to increased reliability in the design process of power transformers.
id UFSM_63566496a749c5747a448b8fb2fd9b82
oai_identifier_str oai:repositorio.ufsm.br:1/39283
network_acronym_str UFSM
network_name_str Manancial - Repositório Digital da UFSM
repository_id_str
spelling Análise de transitórios eletromagnéticos de alta frequência em transformadores através de modelagem caixa branca e medições experimentaisAnalysis of high frequency electromagnetic transients in transformers through white box modeling and experimental measurementsTransformadores de potênciaTransitórios eletromagnéticosAlta frequênciaModelo White BoxAferições práticasPower transformersElectromagnetic transientsHigh frequencyWhite-Box ModelPractical measurementsCNPQ::ENGENHARIAS::ENGENHARIA ELETRICAIn the power system, power transformers play a fundamental role due to their operational importance, high investment cost, and function as the link between power generation and electricity consumption. In this context, understanding the effects of high-frequency electromagnetic transients is essential to ensure the reliability and robustness of these devices during the design stage. To support risk assessment and resource optimization in transformer design, a high-frequency white-box model is proposed for the winding types most commonly used in high-voltage transformers: continuous, intershield, and interleaved coils, considering the conventional standard terminal arrangement. The model was evaluated through a transformer prototype composed of a tank, a wooden core covered with aluminum sheets, and representative windings. The system was subjected to repetitive impulse excitation, and its responses to high-frequency transients were recorded using an oscilloscope. A distinctive feature of this study is the strong dimensional and constructive similarity between the prototype and actual power transformers, as well as the presence of multiple measurement points distributed along the windings. This configuration enabled the analysis of transient voltage distributions at different winding locations and allowed a direct comparison between experimental and simulated results. To ensure measurement reliability, tests were conducted to evaluate the influence of measurement cables and connections on the system response. The transformer windings were represented by an equivalent RLC network based on methodologies widely discussed in CIGRÉ technical publications. The results demonstrate that the proposed model satisfactorily reproduces the experimentally measured responses, particularly the first voltage peak, which is considered a critical parameter for assessing the dielectric robustness of the design. Furthermore, the model exhibited a conservative behavior throughout the transient response, contributing to increased reliability in the design process of power transformers.No Sistema Elétrico de Potência (SEP), os transformadores de potência destacam-se por sua importância operacional, elevado valor de investimento e por constituírem o elo entre geração e consumo de energia elétrica. Nesse contexto, compreender os efeitos de transitórios eletromagnéticos de alta frequência é fundamental para garantir a confiabilidade e a robustez desses equipamentos durante a etapa de projeto. Com o objetivo de auxiliar a análise de riscos e otimizar recursos em projetos de transformadores, propõe-se um modelo white box para análise de transitórios eletromagnéticos de alta frequência nos transformadores de potência considerando os tipos de bobinas mais empregados em enrolamentos de alta tensão: contínuo, intershield e interleaved, considerando a configuração convencional em saída padrão e central. O modelo foi avaliado por meio de um protótipo de transformador composto por tanque, núcleo de madeira revestido por folhas de alumínio e bobinas representativas. O sistema foi submetido a impulsos repetitivos, e as respostas aos transitórios de alta frequência foram registradas por um osciloscópio. Um diferencial deste estudo é a elevada similaridade dimensional e construtiva do protótipo com transformadores reais, além da presença de múltiplos pontos de medição distribuídos ao longo dos enrolamentos, permitindo a análise das tensões transitórias em diferentes posições e a comparação direta entre resultados experimentais e simulados. Para garantir a confiabilidade das medições, foram realizados testes para avaliar a influência dos cabos e conexões de medição sobre a resposta do sistema. Os enrolamentos foram representados por uma rede RLC equivalente baseada em metodologias difundidas em publicações técnicas do CIGRÉ. Os resultados demonstram que o modelo proposto reproduz de forma satisfatória as respostas medidas experimentalmente, especialmente o primeiro pico de tensão, considerado um parâmetro crítico para a avaliação da robustez dielétrica do projeto. Além disso, o modelo apresentou comportamento conservador ao longo do transitório, contribuindo para o aumento da confiabilidade no projeto de transformadores de potência.Universidade Federal de Santa MariaBrasilUFSMPrograma de Pós-Graduação em Engenharia ElétricaCentro de TecnologiaMarchesan, Tiago Bandeirahttp://lattes.cnpq.br/2318413245910780Medeiros, Leonardo HautrivePissolato Filho, JoséFeil, Dion Lenon PredigerStochero, Mateus Paiva2026-09-15T11:42:22Z2026-09-15T11:42:22Z2026-08-10info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttp://repositorio.ufsm.br/handle/1/39283porAttribution-NonCommercial-NoDerivatives 4.0 Internationalinfo:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSM2026-09-15T11:42:23Zoai:repositorio.ufsm.br:1/39283Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/PUBhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.com||manancial@ufsm.bropendoar:2026-09-15T11:42:23Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false
dc.title.none.fl_str_mv Análise de transitórios eletromagnéticos de alta frequência em transformadores através de modelagem caixa branca e medições experimentais
Analysis of high frequency electromagnetic transients in transformers through white box modeling and experimental measurements
title Análise de transitórios eletromagnéticos de alta frequência em transformadores através de modelagem caixa branca e medições experimentais
spellingShingle Análise de transitórios eletromagnéticos de alta frequência em transformadores através de modelagem caixa branca e medições experimentais
Stochero, Mateus Paiva
Transformadores de potência
Transitórios eletromagnéticos
Alta frequência
Modelo White Box
Aferições práticas
Power transformers
Electromagnetic transients
High frequency
White-Box Model
Practical measurements
CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA
title_short Análise de transitórios eletromagnéticos de alta frequência em transformadores através de modelagem caixa branca e medições experimentais
title_full Análise de transitórios eletromagnéticos de alta frequência em transformadores através de modelagem caixa branca e medições experimentais
title_fullStr Análise de transitórios eletromagnéticos de alta frequência em transformadores através de modelagem caixa branca e medições experimentais
title_full_unstemmed Análise de transitórios eletromagnéticos de alta frequência em transformadores através de modelagem caixa branca e medições experimentais
title_sort Análise de transitórios eletromagnéticos de alta frequência em transformadores através de modelagem caixa branca e medições experimentais
author Stochero, Mateus Paiva
author_facet Stochero, Mateus Paiva
author_role author
dc.contributor.none.fl_str_mv Marchesan, Tiago Bandeira
http://lattes.cnpq.br/2318413245910780
Medeiros, Leonardo Hautrive
Pissolato Filho, José
Feil, Dion Lenon Prediger
dc.contributor.author.fl_str_mv Stochero, Mateus Paiva
dc.subject.por.fl_str_mv Transformadores de potência
Transitórios eletromagnéticos
Alta frequência
Modelo White Box
Aferições práticas
Power transformers
Electromagnetic transients
High frequency
White-Box Model
Practical measurements
CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA
topic Transformadores de potência
Transitórios eletromagnéticos
Alta frequência
Modelo White Box
Aferições práticas
Power transformers
Electromagnetic transients
High frequency
White-Box Model
Practical measurements
CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA
description In the power system, power transformers play a fundamental role due to their operational importance, high investment cost, and function as the link between power generation and electricity consumption. In this context, understanding the effects of high-frequency electromagnetic transients is essential to ensure the reliability and robustness of these devices during the design stage. To support risk assessment and resource optimization in transformer design, a high-frequency white-box model is proposed for the winding types most commonly used in high-voltage transformers: continuous, intershield, and interleaved coils, considering the conventional standard terminal arrangement. The model was evaluated through a transformer prototype composed of a tank, a wooden core covered with aluminum sheets, and representative windings. The system was subjected to repetitive impulse excitation, and its responses to high-frequency transients were recorded using an oscilloscope. A distinctive feature of this study is the strong dimensional and constructive similarity between the prototype and actual power transformers, as well as the presence of multiple measurement points distributed along the windings. This configuration enabled the analysis of transient voltage distributions at different winding locations and allowed a direct comparison between experimental and simulated results. To ensure measurement reliability, tests were conducted to evaluate the influence of measurement cables and connections on the system response. The transformer windings were represented by an equivalent RLC network based on methodologies widely discussed in CIGRÉ technical publications. The results demonstrate that the proposed model satisfactorily reproduces the experimentally measured responses, particularly the first voltage peak, which is considered a critical parameter for assessing the dielectric robustness of the design. Furthermore, the model exhibited a conservative behavior throughout the transient response, contributing to increased reliability in the design process of power transformers.
publishDate 2026
dc.date.none.fl_str_mv 2026-09-15T11:42:22Z
2026-09-15T11:42:22Z
2026-08-10
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://repositorio.ufsm.br/handle/1/39283
url http://repositorio.ufsm.br/handle/1/39283
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv Attribution-NonCommercial-NoDerivatives 4.0 International
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Attribution-NonCommercial-NoDerivatives 4.0 International
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Santa Maria
Brasil
UFSM
Programa de Pós-Graduação em Engenharia Elétrica
Centro de Tecnologia
publisher.none.fl_str_mv Universidade Federal de Santa Maria
Brasil
UFSM
Programa de Pós-Graduação em Engenharia Elétrica
Centro de Tecnologia
dc.source.none.fl_str_mv reponame:Manancial - Repositório Digital da UFSM
instname:Universidade Federal de Santa Maria (UFSM)
instacron:UFSM
instname_str Universidade Federal de Santa Maria (UFSM)
instacron_str UFSM
institution UFSM
reponame_str Manancial - Repositório Digital da UFSM
collection Manancial - Repositório Digital da UFSM
repository.name.fl_str_mv Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)
repository.mail.fl_str_mv atendimento.sib@ufsm.br||tedebc@gmail.com||manancial@ufsm.br
_version_ 1876517118083596288