Metodologia para avaliação da suportabilidade de disjuntores frente às solicitações de TRT

Detalhes bibliográficos
Ano de defesa: 2025
Autor(a) principal: Lazzari, Eleonora Fripp
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Tese
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal de Santa Maria
Brasil
UFSM
Programa de Pós-Graduação em Engenharia Elétrica
Centro de Tecnologia
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://repositorio.ufsm.br/handle/1/36772
Resumo: The occurrence of transients in power systems has attracted growing attention in the technical literature due to its relevance to the operational reliability of electrical equipment under high-frequency stresses, such as those arising from circuit breaker operations. These events may generate overvoltages capable of compromising the integrity of components, especially during fault clearing, when the Transient Recovery Voltage (TRV) across the contacts can reach critical levels. To address this issue, this work proposes a methodology based on Fuzzy Logic with a Sugeno-type structure, employing fixed membership functions and consequents adjusted through a weighted average according to the activation degree of the rules. The proposed approach acts as a technical screening tool that enables a preliminary assessment of circuit breaker susceptibility to TRV stresses without the immediate need for extensive numerical simulations. The model allows classification of circuit breakers according to their susceptibility to TRV based on electrical parameters extracted from the system, even under operating conditions not previously simulated. Validation is performed through cross-analysis with control of sample origin, ensuring robustness and representativeness. Samples classified as critical are subsequently evaluated through electromagnetic transient simulations, in which TRV envelopes defined by international standards are verified in terms of both amplitude and rate of rise. The results demonstrate the applicability and effectiveness of the proposed methodology as a screening tool, capable of identifying conditions that require detailed evaluation and significantly reducing the computational burden of traditional simulation approaches, thereby contributing to the preventive assessment of circuit breaker reliability in power systems.
id UFSM_82a129f10618a1e918ddf6169fc8aad0
oai_identifier_str oai:repositorio.ufsm.br:1/36772
network_acronym_str UFSM
network_name_str Manancial - Repositório Digital da UFSM
repository_id_str
spelling Metodologia para avaliação da suportabilidade de disjuntores frente às solicitações de TRTMethodology for assessing the withstand capability of circuit breakers under TRV stressesSistemas de potênciaTransitórios de altas frequênciasTensão de restabelecimento transitóriaSuportabilidade de disjuntoresInferência FuzzyPower systemsVery fast transientsTransient recovery voltageSupportability of circuit breakersFuzzy inferenceCNPQ::ENGENHARIAS::ENGENHARIA ELETRICAThe occurrence of transients in power systems has attracted growing attention in the technical literature due to its relevance to the operational reliability of electrical equipment under high-frequency stresses, such as those arising from circuit breaker operations. These events may generate overvoltages capable of compromising the integrity of components, especially during fault clearing, when the Transient Recovery Voltage (TRV) across the contacts can reach critical levels. To address this issue, this work proposes a methodology based on Fuzzy Logic with a Sugeno-type structure, employing fixed membership functions and consequents adjusted through a weighted average according to the activation degree of the rules. The proposed approach acts as a technical screening tool that enables a preliminary assessment of circuit breaker susceptibility to TRV stresses without the immediate need for extensive numerical simulations. The model allows classification of circuit breakers according to their susceptibility to TRV based on electrical parameters extracted from the system, even under operating conditions not previously simulated. Validation is performed through cross-analysis with control of sample origin, ensuring robustness and representativeness. Samples classified as critical are subsequently evaluated through electromagnetic transient simulations, in which TRV envelopes defined by international standards are verified in terms of both amplitude and rate of rise. The results demonstrate the applicability and effectiveness of the proposed methodology as a screening tool, capable of identifying conditions that require detailed evaluation and significantly reducing the computational burden of traditional simulation approaches, thereby contributing to the preventive assessment of circuit breaker reliability in power systems.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPESA ocorrência de transitórios em sistemas de potência tem despertado crescente interesse na literatura técnica, dada sua relevância para a confiabilidade operacional de equipamentos elétricos diante de solicitações de alta frequência, como aquelas decorrentes de manobras de disjuntores. Esses eventos podem gerar sobretensões capazes de comprometer a integridade dos componentes, especialmente durante a eliminação de faltas, quando a Tensão de Restabelecimento Transitória (TRT) entre os contatos pode atingir níveis críticos. Para abordar essa problemática, este trabalho propõe uma metodologia baseada em lógica Fuzzy com estrutura do tipo Sugeno, utilizando funções de pertinência fixas e consequentes ajustados por média ponderada com base na ativação das regras. A abordagem proposta caracteriza-se como uma ferramenta de triagem técnica capaz de avaliar, preliminarmente, a suscetibilidade de disjuntores e esforços de TRT sem a necessidade imediata de extensas simulações numéricas. O modelo permite classificar disjuntores quanto à sua susceptibilidade à TRT com base em parâmetros elétricos extraídos do sistema, mesmo em situações não previamente simuladas. A validação é realizada por meio de uma análise cruzada com controle de origem das amostras. Amostras classificadas como críticas são posteriormente avaliadas via simulações em software de transitórios eletromagnéticos, nas quais se verifica a superação ou não por meio das envoltórias de TRT definidas por normas técnicas, considerando tanto a amplitude quanto a taxa de crescimento. Os resultados demonstram a aplicabilidade da metodologia como ferramenta de triagem, capaz de indicar situações que demandam avaliação detalhada e reduzir a carga computacional de simulações tradicionais.Universidade Federal de Santa MariaBrasilUFSMPrograma de Pós-Graduação em Engenharia ElétricaCentro de TecnologiaMarchesan, Tiago Bandeirahttp://lattes.cnpq.br/2318413245910780Morais, Adriano Peres deSantos, Eduardo Machados dosGutierres, Luiz Fernando de FreitasLeborgne, Roberto ChouhyFreitag, Suelen CristianeLazzari, Eleonora Fripp2025-11-07T20:56:02Z2025-11-07T20:56:02Z2025-08-06info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisapplication/pdfhttp://repositorio.ufsm.br/handle/1/36772porAttribution-NonCommercial-NoDerivatives 4.0 Internationalinfo:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSM2025-11-07T20:56:02Zoai:repositorio.ufsm.br:1/36772Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/PUBhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.com||manancial@ufsm.bropendoar:2025-11-07T20:56:02Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false
dc.title.none.fl_str_mv Metodologia para avaliação da suportabilidade de disjuntores frente às solicitações de TRT
Methodology for assessing the withstand capability of circuit breakers under TRV stresses
title Metodologia para avaliação da suportabilidade de disjuntores frente às solicitações de TRT
spellingShingle Metodologia para avaliação da suportabilidade de disjuntores frente às solicitações de TRT
Lazzari, Eleonora Fripp
Sistemas de potência
Transitórios de altas frequências
Tensão de restabelecimento transitória
Suportabilidade de disjuntores
Inferência Fuzzy
Power systems
Very fast transients
Transient recovery voltage
Supportability of circuit breakers
Fuzzy inference
CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA
title_short Metodologia para avaliação da suportabilidade de disjuntores frente às solicitações de TRT
title_full Metodologia para avaliação da suportabilidade de disjuntores frente às solicitações de TRT
title_fullStr Metodologia para avaliação da suportabilidade de disjuntores frente às solicitações de TRT
title_full_unstemmed Metodologia para avaliação da suportabilidade de disjuntores frente às solicitações de TRT
title_sort Metodologia para avaliação da suportabilidade de disjuntores frente às solicitações de TRT
author Lazzari, Eleonora Fripp
author_facet Lazzari, Eleonora Fripp
author_role author
dc.contributor.none.fl_str_mv Marchesan, Tiago Bandeira
http://lattes.cnpq.br/2318413245910780
Morais, Adriano Peres de
Santos, Eduardo Machados dos
Gutierres, Luiz Fernando de Freitas
Leborgne, Roberto Chouhy
Freitag, Suelen Cristiane
dc.contributor.author.fl_str_mv Lazzari, Eleonora Fripp
dc.subject.por.fl_str_mv Sistemas de potência
Transitórios de altas frequências
Tensão de restabelecimento transitória
Suportabilidade de disjuntores
Inferência Fuzzy
Power systems
Very fast transients
Transient recovery voltage
Supportability of circuit breakers
Fuzzy inference
CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA
topic Sistemas de potência
Transitórios de altas frequências
Tensão de restabelecimento transitória
Suportabilidade de disjuntores
Inferência Fuzzy
Power systems
Very fast transients
Transient recovery voltage
Supportability of circuit breakers
Fuzzy inference
CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA
description The occurrence of transients in power systems has attracted growing attention in the technical literature due to its relevance to the operational reliability of electrical equipment under high-frequency stresses, such as those arising from circuit breaker operations. These events may generate overvoltages capable of compromising the integrity of components, especially during fault clearing, when the Transient Recovery Voltage (TRV) across the contacts can reach critical levels. To address this issue, this work proposes a methodology based on Fuzzy Logic with a Sugeno-type structure, employing fixed membership functions and consequents adjusted through a weighted average according to the activation degree of the rules. The proposed approach acts as a technical screening tool that enables a preliminary assessment of circuit breaker susceptibility to TRV stresses without the immediate need for extensive numerical simulations. The model allows classification of circuit breakers according to their susceptibility to TRV based on electrical parameters extracted from the system, even under operating conditions not previously simulated. Validation is performed through cross-analysis with control of sample origin, ensuring robustness and representativeness. Samples classified as critical are subsequently evaluated through electromagnetic transient simulations, in which TRV envelopes defined by international standards are verified in terms of both amplitude and rate of rise. The results demonstrate the applicability and effectiveness of the proposed methodology as a screening tool, capable of identifying conditions that require detailed evaluation and significantly reducing the computational burden of traditional simulation approaches, thereby contributing to the preventive assessment of circuit breaker reliability in power systems.
publishDate 2025
dc.date.none.fl_str_mv 2025-11-07T20:56:02Z
2025-11-07T20:56:02Z
2025-08-06
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/doctoralThesis
format doctoralThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://repositorio.ufsm.br/handle/1/36772
url http://repositorio.ufsm.br/handle/1/36772
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv Attribution-NonCommercial-NoDerivatives 4.0 International
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Attribution-NonCommercial-NoDerivatives 4.0 International
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Santa Maria
Brasil
UFSM
Programa de Pós-Graduação em Engenharia Elétrica
Centro de Tecnologia
publisher.none.fl_str_mv Universidade Federal de Santa Maria
Brasil
UFSM
Programa de Pós-Graduação em Engenharia Elétrica
Centro de Tecnologia
dc.source.none.fl_str_mv reponame:Manancial - Repositório Digital da UFSM
instname:Universidade Federal de Santa Maria (UFSM)
instacron:UFSM
instname_str Universidade Federal de Santa Maria (UFSM)
instacron_str UFSM
institution UFSM
reponame_str Manancial - Repositório Digital da UFSM
collection Manancial - Repositório Digital da UFSM
repository.name.fl_str_mv Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)
repository.mail.fl_str_mv atendimento.sib@ufsm.br||tedebc@gmail.com||manancial@ufsm.br
_version_ 1853669939177586688