Efeito de tratamentos de superfície e cimentos resinosos na resistência de união e na carga para falha em fadiga de uma cerâmica vítrea

• Ano de defesa: 2019
• Autor(a) principal: Dalla Nora, Fernanda
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso aberto
• dARK ID: ark:/26339/0013000010p89
• Idioma: por
• Instituição de defesa: Universidade Federal de Santa Maria; Brasil; Odontologia; UFSM; Programa de Pós-Graduação em Ciências Odontológicas; Centro de Ciências da Saúde
• Palavras-chave em Português: Silicato de lítio reforçado por zircônia; Microcisalhamento; Adesão; Carregamento cíclico; Taxa de sobrevivência; Zirconia reinforced lithium silicate ceramic Micro shear; Adhesion; Cyclic loading; Survival Rate; CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA
• Link de acesso: http://repositorio.ufsm.br/handle/1/19327

The aim of the present study was to evaluate the effect of different surface treatments and resin cements on bond strength and mechanical behavior of a zirconia reinforced lithium silicate ceramic (ZLS). For the micro-shear bond strength test, the ZLS blocks were cut into rectangular (1 × 14 × 12 mm) slices, embedded in acrylic resin and divided according to the study factors (n = 36): “surface treatment” (hydrofluoric acid etching 5%- HF; application of a self-etching primer- EP and sandblasting with silica coated aluminum oxide particles- SB) and “resin cements” (MDP-free cement - nMDP; MDP-containing cement - MDP; and self-adhesive cement - SA). After the surface treatments, the different cements were applied inside starch tubes on the ceramic and photopolymerized. Twenty-four hours after the cementation, all specimens were thermocycled (5-55°C, 5,000 cycles). Subsequently, the wire-loop micro-shear test was carried out. Statistical analysis was performed using Kruskal-Wallis and post-hoc Dunn tests. For the fatigue test, ceramic discs (diameter- Ø = 10 mm, thickness = 1.5 mm) and discs of dentin analog material (Ø = 10 mm, thickness = 20 mm) were made and divided according to the factors of the study (n = 15) described above. The discs were cemented, thermocycled and submitted to the fatigue test (Step-wise), starting with a load of 400N at a frequency of 20Hz for 10,000 cycles for step, plus 100N for step. Statistical analysis was performed using Kaplan-Meier and Mantel-Cox (Log Rank) tests (p < 0.05). For the bond strength test, considering the type of surface treatment, the HF and the EP provided higher values of bond strength with the self-adhesive cement, and the SB with the conventional resin cement and the self-adhesive cement. Considering the type of cement, the MDP-free conventional one showed better results with the HF or SB treatments and the MDP-containing and the self-adhesive cements performed better results with HF etching. Regarding the fatigue test, the surface treatment with hydrofluoric acid and ceramic primer showed values of load and number of cycles for failure statistically similar and higher than the sandblasting, regardless of the type of cement. When only the surface treatment was considered, the best cement for hydrofluoric acid and sandblast surface treatments was self-adhesive cement. There was no difference between the cements for the ceramic treatment with the self-etching primer.