Avaliação de revestimentos de argamassa à permeabilidade ao vapor de água
Ano de defesa: | 2014 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | , |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal de Santa Maria
|
Programa de Pós-Graduação: |
Programa de Pós-Graduação em Engenharia Civil
|
Departamento: |
Engenharia Civil
|
País: |
BR
|
Palavras-chave em Português: | |
Palavras-chave em Inglês: | |
Área do conhecimento CNPq: | |
Link de acesso: | http://repositorio.ufsm.br/handle/1/7869 |
Resumo: | The present study evaluates: the performance of tensile adhesion and water and vapour permeability of mortar rendering systems.The study can highlight the following conclusions: the traditional cement, lime and sand mortars presented the lower adherence values and the highest water absorption values independent of the substrate used - loadbearing ceramic masonry block, nonbearing block with smooth surface and nonbearing block with rugged surface; through the results of the experiments it can be recommended the use of the corse mortar as the basis of the coating system to increase the adhesion and water permeability; the presence of the coarse layer elevated the adherence capacity of all mortars tested but no significant change was noticed in the water absorption; Generally the loadbearing ceramic masonry blocks presented the lower values of water absorption; the nonbearing rugged blocks showed higher adherence levels than the smooth surface blocks; the water vapour permeability coefficient was determined using a test cup with 100mm and worked well with mortar specimens with 20mm thickness; the industrialized mortars presented scattered results in the water vapour permeability test, prooving that the internal pore structure has influence in the vapour transmission; it was also verified that the ceramic material has a great restriction to vapour transmission because of its microstructure; it was also possible to notice the presence of salts in the surface of the samples, that occurred because the water vapour flow is continuous when interacting with the saline solution of lithium chloride; it was also verified that the mortars present different internal arrangements with pores that have distinct geometries. |
id |
UFSM_dcc89c2e9073edf945d6d3a3e702d7ee |
---|---|
oai_identifier_str |
oai:repositorio.ufsm.br:1/7869 |
network_acronym_str |
UFSM |
network_name_str |
Biblioteca Digital de Teses e Dissertações do UFSM |
repository_id_str |
|
spelling |
2015-05-062015-05-062014-09-26TEMP, Aldo Leonel. EVALUATION OF DIFFERENT TYPES OF MORTAR BY PERMEABILITY WATER VAPOUR. 2014. 152 f. Dissertação (Mestrado em Engenharia Civil) - Universidade Federal de Santa Maria, Santa Maria, 2014.http://repositorio.ufsm.br/handle/1/7869The present study evaluates: the performance of tensile adhesion and water and vapour permeability of mortar rendering systems.The study can highlight the following conclusions: the traditional cement, lime and sand mortars presented the lower adherence values and the highest water absorption values independent of the substrate used - loadbearing ceramic masonry block, nonbearing block with smooth surface and nonbearing block with rugged surface; through the results of the experiments it can be recommended the use of the corse mortar as the basis of the coating system to increase the adhesion and water permeability; the presence of the coarse layer elevated the adherence capacity of all mortars tested but no significant change was noticed in the water absorption; Generally the loadbearing ceramic masonry blocks presented the lower values of water absorption; the nonbearing rugged blocks showed higher adherence levels than the smooth surface blocks; the water vapour permeability coefficient was determined using a test cup with 100mm and worked well with mortar specimens with 20mm thickness; the industrialized mortars presented scattered results in the water vapour permeability test, prooving that the internal pore structure has influence in the vapour transmission; it was also verified that the ceramic material has a great restriction to vapour transmission because of its microstructure; it was also possible to notice the presence of salts in the surface of the samples, that occurred because the water vapour flow is continuous when interacting with the saline solution of lithium chloride; it was also verified that the mortars present different internal arrangements with pores that have distinct geometries.Neste estudo foram avaliados: o desempenho de aderência à tração e permeabilidade à água no estado líquido e ao vapor de sistemas de revestimento argamassados. Como conclusões gerais do trabalho, podem destacar as seguintes: argamassa tradicional de cimento, cal e areia apresentaram os menores valores de resistência de aderência e os maiores valores de absorção de água para os diferentes substratos bloco cerâmico estrutural, bloco de vedação liso e bloco de vedação ranhurado; a partir dos resultados experimentais recomenda-se o uso da base do sistema de revestimento (chapisco) para aumentar o desempenho de aderência à tração e permeabilidade a água das argamassas de revestimento; a presença do chapisco aumentou o nível de resistência de aderência para todas as argamassas avaliadas e não se observou mudança significativa no nível de absorção de água produzido pela presença do chapisco; de uma forma geral, os blocos cerâmicos estruturais foram os que produziram os menores níveis de absorção de água; os blocos de vedação ranhurados apresentaram níveis de resistência de aderência maiores do que os blocos de vedação lisos; a determinação do coeficiente de permeabilidade ao vapor de água utilizando o copo teste de 100 mm mostrou-se favorável para as amostras de argamassas estudadas com espessura de 20 mm; as argamassas industrializadas apresentaram coeficientes de permeabilidade ao vapor de água dispersos, ficando evidente que existe a influência da estrutura interna de poros na transmissão de vapor; foi verificado que a cerâmica tem uma grande restrição ao fluxo de vapor, devido a sua microestrutura; visualmente foi observado a presença de sais na superfície das amostras, isso ocorreu pelo fato de que o fluxo é contínuo interagindo com a solução salina de cloreto de lítio; verificou-se que, as argamassas apresentam diferentes arranjos internos, com poros de diferentes geometrias.Coordenação de Aperfeiçoamento de Pessoal de Nível Superiorapplication/pdfporUniversidade Federal de Santa MariaPrograma de Pós-Graduação em Engenharia CivilUFSMBREngenharia CivilArgamassas de revestimentoAderênciaPermeabilidadeRendering mortarAdhesionPermeabilityCNPQ::ENGENHARIAS::ENGENHARIA CIVILAvaliação de revestimentos de argamassa à permeabilidade ao vapor de águaEvaluation of different types of mortar by permeability water vapourinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisMohamad, Gihadhttp://lattes.cnpq.br/5446970753192990Lima, Rogerio Cattelan Antocheves dehttp://lattes.cnpq.br/5518587537986438Vargas, Alexandre Silva dehttp://lattes.cnpq.br/6501148372644975Rizzatti, Eduardohttp://lattes.cnpq.br/2907271596071103http://lattes.cnpq.br/0546415481385275Temp, Aldo Leonel300100000003400300300300300300821281d4-7dc1-4c12-b084-2d4c1590347a7cf64d26-d0f6-48a4-9db8-538ae3a5e752a1ceceaa-77c8-48ce-8450-fede4f33cf32c28c2145-caeb-4538-82b1-2922fb717e21168ddbe9-e73b-4690-982a-ebf37d172d8dinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações do UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSMORIGINALTEMP, ALDO LEONEL.pdfapplication/pdf6454802http://repositorio.ufsm.br/bitstream/1/7869/1/TEMP%2c%20ALDO%20LEONEL.pdf87fd3bb1f5c92a45f160edd956b3693cMD51TEXTTEMP, ALDO LEONEL.pdf.txtTEMP, ALDO LEONEL.pdf.txtExtracted texttext/plain198439http://repositorio.ufsm.br/bitstream/1/7869/2/TEMP%2c%20ALDO%20LEONEL.pdf.txtdb82dd380dc5c368689bdf7e9bcd8311MD52THUMBNAILTEMP, ALDO LEONEL.pdf.jpgTEMP, ALDO LEONEL.pdf.jpgIM Thumbnailimage/jpeg4739http://repositorio.ufsm.br/bitstream/1/7869/3/TEMP%2c%20ALDO%20LEONEL.pdf.jpg216aaf92f61eaf955e8db7eb8e3caed6MD531/78692022-03-04 08:51:06.959oai:repositorio.ufsm.br:1/7869Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2022-03-04T11:51:06Biblioteca Digital de Teses e Dissertações do UFSM - Universidade Federal de Santa Maria (UFSM)false |
dc.title.por.fl_str_mv |
Avaliação de revestimentos de argamassa à permeabilidade ao vapor de água |
dc.title.alternative.eng.fl_str_mv |
Evaluation of different types of mortar by permeability water vapour |
title |
Avaliação de revestimentos de argamassa à permeabilidade ao vapor de água |
spellingShingle |
Avaliação de revestimentos de argamassa à permeabilidade ao vapor de água Temp, Aldo Leonel Argamassas de revestimento Aderência Permeabilidade Rendering mortar Adhesion Permeability CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
title_short |
Avaliação de revestimentos de argamassa à permeabilidade ao vapor de água |
title_full |
Avaliação de revestimentos de argamassa à permeabilidade ao vapor de água |
title_fullStr |
Avaliação de revestimentos de argamassa à permeabilidade ao vapor de água |
title_full_unstemmed |
Avaliação de revestimentos de argamassa à permeabilidade ao vapor de água |
title_sort |
Avaliação de revestimentos de argamassa à permeabilidade ao vapor de água |
author |
Temp, Aldo Leonel |
author_facet |
Temp, Aldo Leonel |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Mohamad, Gihad |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/5446970753192990 |
dc.contributor.advisor-co1.fl_str_mv |
Lima, Rogerio Cattelan Antocheves de |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://lattes.cnpq.br/5518587537986438 |
dc.contributor.referee1.fl_str_mv |
Vargas, Alexandre Silva de |
dc.contributor.referee1Lattes.fl_str_mv |
http://lattes.cnpq.br/6501148372644975 |
dc.contributor.referee2.fl_str_mv |
Rizzatti, Eduardo |
dc.contributor.referee2Lattes.fl_str_mv |
http://lattes.cnpq.br/2907271596071103 |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/0546415481385275 |
dc.contributor.author.fl_str_mv |
Temp, Aldo Leonel |
contributor_str_mv |
Mohamad, Gihad Lima, Rogerio Cattelan Antocheves de Vargas, Alexandre Silva de Rizzatti, Eduardo |
dc.subject.por.fl_str_mv |
Argamassas de revestimento Aderência Permeabilidade |
topic |
Argamassas de revestimento Aderência Permeabilidade Rendering mortar Adhesion Permeability CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
dc.subject.eng.fl_str_mv |
Rendering mortar Adhesion Permeability |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
description |
The present study evaluates: the performance of tensile adhesion and water and vapour permeability of mortar rendering systems.The study can highlight the following conclusions: the traditional cement, lime and sand mortars presented the lower adherence values and the highest water absorption values independent of the substrate used - loadbearing ceramic masonry block, nonbearing block with smooth surface and nonbearing block with rugged surface; through the results of the experiments it can be recommended the use of the corse mortar as the basis of the coating system to increase the adhesion and water permeability; the presence of the coarse layer elevated the adherence capacity of all mortars tested but no significant change was noticed in the water absorption; Generally the loadbearing ceramic masonry blocks presented the lower values of water absorption; the nonbearing rugged blocks showed higher adherence levels than the smooth surface blocks; the water vapour permeability coefficient was determined using a test cup with 100mm and worked well with mortar specimens with 20mm thickness; the industrialized mortars presented scattered results in the water vapour permeability test, prooving that the internal pore structure has influence in the vapour transmission; it was also verified that the ceramic material has a great restriction to vapour transmission because of its microstructure; it was also possible to notice the presence of salts in the surface of the samples, that occurred because the water vapour flow is continuous when interacting with the saline solution of lithium chloride; it was also verified that the mortars present different internal arrangements with pores that have distinct geometries. |
publishDate |
2014 |
dc.date.issued.fl_str_mv |
2014-09-26 |
dc.date.accessioned.fl_str_mv |
2015-05-06 |
dc.date.available.fl_str_mv |
2015-05-06 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
TEMP, Aldo Leonel. EVALUATION OF DIFFERENT TYPES OF MORTAR BY PERMEABILITY WATER VAPOUR. 2014. 152 f. Dissertação (Mestrado em Engenharia Civil) - Universidade Federal de Santa Maria, Santa Maria, 2014. |
dc.identifier.uri.fl_str_mv |
http://repositorio.ufsm.br/handle/1/7869 |
identifier_str_mv |
TEMP, Aldo Leonel. EVALUATION OF DIFFERENT TYPES OF MORTAR BY PERMEABILITY WATER VAPOUR. 2014. 152 f. Dissertação (Mestrado em Engenharia Civil) - Universidade Federal de Santa Maria, Santa Maria, 2014. |
url |
http://repositorio.ufsm.br/handle/1/7869 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.cnpq.fl_str_mv |
300100000003 |
dc.relation.confidence.fl_str_mv |
400 300 300 300 300 300 |
dc.relation.authority.fl_str_mv |
821281d4-7dc1-4c12-b084-2d4c1590347a 7cf64d26-d0f6-48a4-9db8-538ae3a5e752 a1ceceaa-77c8-48ce-8450-fede4f33cf32 c28c2145-caeb-4538-82b1-2922fb717e21 168ddbe9-e73b-4690-982a-ebf37d172d8d |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Civil |
dc.publisher.initials.fl_str_mv |
UFSM |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Engenharia Civil |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações do UFSM instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Biblioteca Digital de Teses e Dissertações do UFSM |
collection |
Biblioteca Digital de Teses e Dissertações do UFSM |
bitstream.url.fl_str_mv |
http://repositorio.ufsm.br/bitstream/1/7869/1/TEMP%2c%20ALDO%20LEONEL.pdf http://repositorio.ufsm.br/bitstream/1/7869/2/TEMP%2c%20ALDO%20LEONEL.pdf.txt http://repositorio.ufsm.br/bitstream/1/7869/3/TEMP%2c%20ALDO%20LEONEL.pdf.jpg |
bitstream.checksum.fl_str_mv |
87fd3bb1f5c92a45f160edd956b3693c db82dd380dc5c368689bdf7e9bcd8311 216aaf92f61eaf955e8db7eb8e3caed6 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações do UFSM - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
atendimento.sib@ufsm.br||tedebc@gmail.com |
_version_ |
1793240162406236160 |