Exportação concluída — 

Princípios de design educacional e desenvolvimento de recursos educacionais para os cursos técnicos concomitantes EaD do IFRO

Detalhes bibliográficos
Ano de defesa: 2022
Autor(a) principal: Cordenonsi, Adriana Zanki
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
dARK ID: ark:/26339/0013000015mpb
Idioma: por
Instituição de defesa: Universidade Federal de Santa Maria
Brasil
Educação
UFSM
Programa de Pós-Graduação em Educação Profissional e Tecnológica
Colégio Técnico Industrial de Santa Maria
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://repositorio.ufsm.br/handle/1/26852
Resumo: The work presented here shows the final results of the research project developed in the Academic Master's Degree in Vocational and Technological Education at the Industrial Technical College of Santa Maria of the Federal University of Santa Maria. The objective of the work was to develop instructional design and educational resources for concomitant vocational courses at the Federal Institute of Rondônia, in order to adapt the teaching-learning process for the teenager target audience, especially regarding the EaD workload present in this modality and which presents deficiencies in its implementation. Initially, a bibliographic survey was carried out on the subject and the theoretical foundations on instructional design, active methodologies, blended learning, educational resources, use of technologies and learning styles were addressed. The investigation with the target audience, in relation to the teaching-learning processes, on the methodologies, resources and media most accepted by this audience, provided subsidies for the development of the design. The methodological foundation is the Design Based Research (DBR), which proposes to identify the problems by those involved in the research and apply the practical and innovative solutions through iterative cycles, in a process of improving the results. Bardin's content analysis was used to verify the results obtained through qualitative and quantitative methods. In addition to the instructional design for the subject, a pedagogical game was developed for content review. The game and the design were applied at the Federal Institute of Rondônia, in the EaD Vocational course in Administration concomitant to high school, in the Marketing discipline. The results showed that students in this age group are eager for more practical classes, use of games and interactivity. The methodologies used in the instructional design project were the flipped classroom and project-based learning, both of which had good acceptance and satisfactory results. The resources developed sought to present various levels of interactivity and were very well accepted. The design principles for this course resulting from the implementation of the instructional design planned for the Marketing discipline were: 1) Diagnosis and Evaluation; 2) Interactivity; 3) Practice; 4) Flipped Classroom.
id UFSM_f180e3e4c49c3d89446f3c49aaabd5cb
oai_identifier_str oai:repositorio.ufsm.br:1/26852
network_acronym_str UFSM
network_name_str Manancial - Repositório Digital da UFSM
repository_id_str
spelling Princípios de design educacional e desenvolvimento de recursos educacionais para os cursos técnicos concomitantes EaD do IFROInstructional design principles and development of educational resources for IFRO's concomitant vocational courses EaDEducação profissional e tecnológicaDesign educacionalMetodologias ativasVocational and technological educationInstructional designActive methodologiesCNPQ::CIENCIAS HUMANAS::EDUCACAOThe work presented here shows the final results of the research project developed in the Academic Master's Degree in Vocational and Technological Education at the Industrial Technical College of Santa Maria of the Federal University of Santa Maria. The objective of the work was to develop instructional design and educational resources for concomitant vocational courses at the Federal Institute of Rondônia, in order to adapt the teaching-learning process for the teenager target audience, especially regarding the EaD workload present in this modality and which presents deficiencies in its implementation. Initially, a bibliographic survey was carried out on the subject and the theoretical foundations on instructional design, active methodologies, blended learning, educational resources, use of technologies and learning styles were addressed. The investigation with the target audience, in relation to the teaching-learning processes, on the methodologies, resources and media most accepted by this audience, provided subsidies for the development of the design. The methodological foundation is the Design Based Research (DBR), which proposes to identify the problems by those involved in the research and apply the practical and innovative solutions through iterative cycles, in a process of improving the results. Bardin's content analysis was used to verify the results obtained through qualitative and quantitative methods. In addition to the instructional design for the subject, a pedagogical game was developed for content review. The game and the design were applied at the Federal Institute of Rondônia, in the EaD Vocational course in Administration concomitant to high school, in the Marketing discipline. The results showed that students in this age group are eager for more practical classes, use of games and interactivity. The methodologies used in the instructional design project were the flipped classroom and project-based learning, both of which had good acceptance and satisfactory results. The resources developed sought to present various levels of interactivity and were very well accepted. The design principles for this course resulting from the implementation of the instructional design planned for the Marketing discipline were: 1) Diagnosis and Evaluation; 2) Interactivity; 3) Practice; 4) Flipped Classroom.O trabalho aqui apresentado mostra os resultados finais do projeto de pesquisa desenvolvido no Curso de Mestrado Acadêmico em Educação Profissional e Tecnológica do Colégio Técnico Industrial de Santa Maria da Universidade Federal de Santa Maria. O objetivo do trabalho foi desenvolver o design educacional e recursos educacionais para os cursos técnicos concomitantes do Instituto Federal de Rondônia, de forma a adequar o processo de ensino-aprendizagem para o público-alvo adolescente, especialmente com relação à carga horária EaD presente nesta modalidade e que apresenta deficiências na sua implementação. Inicialmente foi realizado um levantamento bibliográfico sobre o tema e abordado os fundamentos teóricos sobre design educacional, metodologias ativas, ensino híbrido, recursos educacionais, uso de tecnologias e estilos de aprendizagem. A investigação junto ao público-alvo, com relação aos processos de ensino-aprendizagem, sobre as metodologias, recursos e mídias mais aceitos por este público, forneceram subsídios para o desenvolvimento do design. A fundamentação metodológica baseia-se na Design Based Research (DBR), a qual propõe identificar os problemas pelos envolvidos na pesquisa e aplicar as soluções práticas e inovadoras através de ciclos iterativos, em um processo de aprimoramento dos resultados. A análise de conteúdo de Bardin foi usada para verificar os resultados obtidos através de métodos qualitativos e quantitativos. Além do design educacional para a disciplina foi desenvolvido um jogo pedagógico para revisão de conteúdos. Os ciclos de aplicação do jogo e do design foram realizados no Instituto Federal de Rondônia, no curso Técnico em Administração concomitante ao ensino médio EaD, na disciplina de Marketing. Os resultados mostraram que os alunos desta faixa etária estão ávidos por aulas mais práticas, uso de jogos e interatividade. As metodologias usadas no projeto de design educacional foram a Sala de Aula Invertida e a Aprendizagem baseada em Projetos, ambas tiveram uma boa aceitação e resultados satisfatórios. Os recursos desenvolvidos procuraram apresentar variados níveis de interatividade e foram muito bem aceitos. Os princípios de design para esta modalidade de curso resultantes da implementação do design educacional planejado para a disciplina de Marketing foram: 1) Diagnóstico e Avaliação; 2) Interatividade; 3) Prática; 4) Sala de Aula Invertida.Universidade Federal de Santa MariaBrasilEducaçãoUFSMPrograma de Pós-Graduação em Educação Profissional e TecnológicaColégio Técnico Industrial de Santa MariaBarin, Cláudia Smaniottohttp://lattes.cnpq.br/0832298305352059Ellensohn, RicardoLima, Valdeson AmaroCordenonsi, Adriana Zanki2022-11-11T20:07:29Z2022-11-11T20:07:29Z2022-10-14info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttp://repositorio.ufsm.br/handle/1/26852ark:/26339/0013000015mpbporAttribution-NonCommercial-NoDerivatives 4.0 Internationalinfo:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSM2022-11-11T20:07:29Zoai:repositorio.ufsm.br:1/26852Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/PUBhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.com||manancial@ufsm.bropendoar:2022-11-11T20:07:29Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false
dc.title.none.fl_str_mv Princípios de design educacional e desenvolvimento de recursos educacionais para os cursos técnicos concomitantes EaD do IFRO
Instructional design principles and development of educational resources for IFRO's concomitant vocational courses EaD
title Princípios de design educacional e desenvolvimento de recursos educacionais para os cursos técnicos concomitantes EaD do IFRO
spellingShingle Princípios de design educacional e desenvolvimento de recursos educacionais para os cursos técnicos concomitantes EaD do IFRO
Cordenonsi, Adriana Zanki
Educação profissional e tecnológica
Design educacional
Metodologias ativas
Vocational and technological education
Instructional design
Active methodologies
CNPQ::CIENCIAS HUMANAS::EDUCACAO
title_short Princípios de design educacional e desenvolvimento de recursos educacionais para os cursos técnicos concomitantes EaD do IFRO
title_full Princípios de design educacional e desenvolvimento de recursos educacionais para os cursos técnicos concomitantes EaD do IFRO
title_fullStr Princípios de design educacional e desenvolvimento de recursos educacionais para os cursos técnicos concomitantes EaD do IFRO
title_full_unstemmed Princípios de design educacional e desenvolvimento de recursos educacionais para os cursos técnicos concomitantes EaD do IFRO
title_sort Princípios de design educacional e desenvolvimento de recursos educacionais para os cursos técnicos concomitantes EaD do IFRO
author Cordenonsi, Adriana Zanki
author_facet Cordenonsi, Adriana Zanki
author_role author
dc.contributor.none.fl_str_mv Barin, Cláudia Smaniotto
http://lattes.cnpq.br/0832298305352059
Ellensohn, Ricardo
Lima, Valdeson Amaro
dc.contributor.author.fl_str_mv Cordenonsi, Adriana Zanki
dc.subject.por.fl_str_mv Educação profissional e tecnológica
Design educacional
Metodologias ativas
Vocational and technological education
Instructional design
Active methodologies
CNPQ::CIENCIAS HUMANAS::EDUCACAO
topic Educação profissional e tecnológica
Design educacional
Metodologias ativas
Vocational and technological education
Instructional design
Active methodologies
CNPQ::CIENCIAS HUMANAS::EDUCACAO
description The work presented here shows the final results of the research project developed in the Academic Master's Degree in Vocational and Technological Education at the Industrial Technical College of Santa Maria of the Federal University of Santa Maria. The objective of the work was to develop instructional design and educational resources for concomitant vocational courses at the Federal Institute of Rondônia, in order to adapt the teaching-learning process for the teenager target audience, especially regarding the EaD workload present in this modality and which presents deficiencies in its implementation. Initially, a bibliographic survey was carried out on the subject and the theoretical foundations on instructional design, active methodologies, blended learning, educational resources, use of technologies and learning styles were addressed. The investigation with the target audience, in relation to the teaching-learning processes, on the methodologies, resources and media most accepted by this audience, provided subsidies for the development of the design. The methodological foundation is the Design Based Research (DBR), which proposes to identify the problems by those involved in the research and apply the practical and innovative solutions through iterative cycles, in a process of improving the results. Bardin's content analysis was used to verify the results obtained through qualitative and quantitative methods. In addition to the instructional design for the subject, a pedagogical game was developed for content review. The game and the design were applied at the Federal Institute of Rondônia, in the EaD Vocational course in Administration concomitant to high school, in the Marketing discipline. The results showed that students in this age group are eager for more practical classes, use of games and interactivity. The methodologies used in the instructional design project were the flipped classroom and project-based learning, both of which had good acceptance and satisfactory results. The resources developed sought to present various levels of interactivity and were very well accepted. The design principles for this course resulting from the implementation of the instructional design planned for the Marketing discipline were: 1) Diagnosis and Evaluation; 2) Interactivity; 3) Practice; 4) Flipped Classroom.
publishDate 2022
dc.date.none.fl_str_mv 2022-11-11T20:07:29Z
2022-11-11T20:07:29Z
2022-10-14
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://repositorio.ufsm.br/handle/1/26852
dc.identifier.dark.fl_str_mv ark:/26339/0013000015mpb
url http://repositorio.ufsm.br/handle/1/26852
identifier_str_mv ark:/26339/0013000015mpb
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv Attribution-NonCommercial-NoDerivatives 4.0 International
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Attribution-NonCommercial-NoDerivatives 4.0 International
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Santa Maria
Brasil
Educação
UFSM
Programa de Pós-Graduação em Educação Profissional e Tecnológica
Colégio Técnico Industrial de Santa Maria
publisher.none.fl_str_mv Universidade Federal de Santa Maria
Brasil
Educação
UFSM
Programa de Pós-Graduação em Educação Profissional e Tecnológica
Colégio Técnico Industrial de Santa Maria
dc.source.none.fl_str_mv reponame:Manancial - Repositório Digital da UFSM
instname:Universidade Federal de Santa Maria (UFSM)
instacron:UFSM
instname_str Universidade Federal de Santa Maria (UFSM)
instacron_str UFSM
institution UFSM
reponame_str Manancial - Repositório Digital da UFSM
collection Manancial - Repositório Digital da UFSM
repository.name.fl_str_mv Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)
repository.mail.fl_str_mv atendimento.sib@ufsm.br||tedebc@gmail.com||manancial@ufsm.br
_version_ 1847153497813811200