Performance biomecânica e caracterização do protetor bucal em implante dentário frente à impacto análise experimental e elementos finitos
Ano de defesa: | 2016 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal de Uberlândia
BR Programa de Pós-graduação em Odontologia Ciências da Saúde UFU |
Programa de Pós-Graduação: |
Não Informado pela instituição
|
Departamento: |
Não Informado pela instituição
|
País: |
Não Informado pela instituição
|
Palavras-chave em Português: | |
Link de acesso: | https://repositorio.ufu.br/handle/123456789/17036 http://doi.org/10.14393/ufu.di.2016.184 |
Resumo: | The aim of this study was to characterize the mouthguard material and evaluate mouthguard shock absorption, impact strain and stress behavior in an impact on dental implants inserted in the anterior maxilla. Sixty models were manufactured which were randomly divided into six groups (n=10) varying: implant type, EH external hexagon (Alvim Smart, NEODENT), and MT, Morse taper (Alvim CM, NEODENT); mouthguard type: custom-fitted with two sheets of EVA (BioART), standard self-adapted (Dogma Indútria e Comércio de Plásticos Ltda) and without mouthguard. To characterize the mouthguard material Shore A hardness and thickness of EVA sheets, transparent and pink, and mouthguard were measured. To characterize the deformation of the implant front impact, strain gauge was attached at the palatal surface of the implant abutment and samples were submitted to the impact test at 45° directed in the central buccal side of the crown. Abutment/implant distortion after the impact was calculated by the centroid in standardized XR-images. Six two-dimensional finite element models were created and submitted to nonlinear dynamics analysis of impact, with parameters and factors similar to the strain gauge test. The data were statistically analyzed using factorial analysis of variance and Tukey test (α=0.05). There was no significant difference in Shore A hardness between pink and transparent sheets (P=0.796). Standard self-adapted mouthguard expressed Shore A hardness lower than custom-fitted (P<0.001). The sheet thickness presented standardization of industrial construction. After heat forming process the standard self-adapted mouthguard kept the initial thickness, but the custom-fitted mouthguard suffered significant reduction. The mouthguard presence reduced significantly the strain values (P<0.001), especially the custom-fitted, there is no significant difference between the implant connection type (P=0.547). After impact, there was micro displacement in the implant/abutment, which was more pronounced in the absence of mouthguard use. Implant EH resulted in higher values of stress and strain. The mouthguard shock absorption was 40 to 46% and increased the time of contact of the sphere on impact by reducing the peak of the stress. |
id |
UFU_176bedc54c94212ef4e526fd17f53738 |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/17036 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
Performance biomecânica e caracterização do protetor bucal em implante dentário frente à impacto análise experimental e elementos finitosMétodo de elementos finitosImplante dentárioProtetor bucalTensãoDeformaçãoCopolímero de etileno vinil acetatoFinite element analysisDental implantMouthguardsStressStrainEthylenevinylacetate copolymerCNPQ::CIENCIAS DA SAUDE::ODONTOLOGIAThe aim of this study was to characterize the mouthguard material and evaluate mouthguard shock absorption, impact strain and stress behavior in an impact on dental implants inserted in the anterior maxilla. Sixty models were manufactured which were randomly divided into six groups (n=10) varying: implant type, EH external hexagon (Alvim Smart, NEODENT), and MT, Morse taper (Alvim CM, NEODENT); mouthguard type: custom-fitted with two sheets of EVA (BioART), standard self-adapted (Dogma Indútria e Comércio de Plásticos Ltda) and without mouthguard. To characterize the mouthguard material Shore A hardness and thickness of EVA sheets, transparent and pink, and mouthguard were measured. To characterize the deformation of the implant front impact, strain gauge was attached at the palatal surface of the implant abutment and samples were submitted to the impact test at 45° directed in the central buccal side of the crown. Abutment/implant distortion after the impact was calculated by the centroid in standardized XR-images. Six two-dimensional finite element models were created and submitted to nonlinear dynamics analysis of impact, with parameters and factors similar to the strain gauge test. The data were statistically analyzed using factorial analysis of variance and Tukey test (α=0.05). There was no significant difference in Shore A hardness between pink and transparent sheets (P=0.796). Standard self-adapted mouthguard expressed Shore A hardness lower than custom-fitted (P<0.001). The sheet thickness presented standardization of industrial construction. After heat forming process the standard self-adapted mouthguard kept the initial thickness, but the custom-fitted mouthguard suffered significant reduction. The mouthguard presence reduced significantly the strain values (P<0.001), especially the custom-fitted, there is no significant difference between the implant connection type (P=0.547). After impact, there was micro displacement in the implant/abutment, which was more pronounced in the absence of mouthguard use. Implant EH resulted in higher values of stress and strain. The mouthguard shock absorption was 40 to 46% and increased the time of contact of the sphere on impact by reducing the peak of the stress.Fundação de Amparo a Pesquisa do Estado de Minas GeraisMestre em OdontologiaO objetivo deste estudo foi caracterizar o material do protetor bucal e avaliar o efeito do uso na absorção de choque, deformação e tensão frente ao impacto em implantes dentais inseridos na região anterior da maxila. Confeccionou-se sessenta modelos, que foram aleatoriamente divididos em seis grupos (n=10) variando: tipo de implante HE, hexágono externo (Alvim Smart, NEODENT), e CM, cone Morse (Alvim CM, NEODENT; tipo de protetor bucal customizado com duas placas de EVA (BioART), pré-fabricado (Dogma Indútria e Comércio de Plásticos Ltda) e sem protetor. Para caracterizar o material do protetor a dureza Shore A, espessura das placas de cor rosa e transparente de EVA e dos protetores foram mensuradas. Para caracterizar a deformação do implante frente ao impacto, extensometros foram colados na superfície palatina do pilar do implante e as amostras foram submetidas ao teste de impacto, a 45° direcionados no centro vestibular da coroa. A distorção pilar/implante após o impacto foi calculada pelo centroide por radiografias digitalizadas. Seis modelos bidimensionais de elementos finitos foram criados e submetidos à análise dinâmica não linear de impacto, com parâmetros e fatores em estudos semelhantes ao teste de extensometria. Os dados foram analisados estatisticamente empregando Análise de Variância fatorial e teste de Tukey (α=0,05). Não houve diferença significativa na dureza Shore A, entre placa rosa e transparente (P=0,796). O protetor pré-fabricado apresentou dureza Shore A inferior ao customizado (P<0,001). A espessura das placas apresentou padronização de construção industrial. Após a plastificação o protetor pré-fabricado manteve a espessura inicial, porém os protetores customizado sofreram redução significativa na plastificação. A presença de protetor reduziu significativamente os valores de deformação (P<0,001), principalmente o customizado, não havendo diferença significativa entre o tipo de conexão de implante (P=0,547). Após impacto houve micro deslocamento no pilar/implante, sendo este deslocamento mais acentuado na ausência de protetor bucal. Implante HE resultou em maiores valores de tensão e deformação. A absorção de impacto do protetor foi de 40 a 46% e aumentou o tempo de contato da esfera no impacto reduzindo o pico de tensão.Universidade Federal de UberlândiaBRPrograma de Pós-graduação em OdontologiaCiências da SaúdeUFUVeríssimo, Crisnicawhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4485500A2Soares, Carlos Joséhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4790296P8Zanetta-Barbosa, Darcenyhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4797156Y8Bernardes, Sérgio Rochahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4735654P0Carvalho, Valessa Florindo2016-06-22T18:47:41Z2016-04-262016-06-22T18:47:41Z2016-02-29info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfapplication/pdfCARVALHO, Valessa Florindo. Performance biomecânica e caracterização do protetor bucal em implante dentário frente à impacto análise experimental e elementos finitos. 2016. 88 f. Dissertação (Mestrado em Ciências da Saúde) - Universidade Federal de Uberlândia, Uberlândia, 2016. Disponível em: http://doi.org/10.14393/ufu.di.2016.184https://repositorio.ufu.br/handle/123456789/17036http://doi.org/10.14393/ufu.di.2016.184porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2021-03-19T20:23:50Zoai:repositorio.ufu.br:123456789/17036Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2021-03-19T20:23:50Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.none.fl_str_mv |
Performance biomecânica e caracterização do protetor bucal em implante dentário frente à impacto análise experimental e elementos finitos |
title |
Performance biomecânica e caracterização do protetor bucal em implante dentário frente à impacto análise experimental e elementos finitos |
spellingShingle |
Performance biomecânica e caracterização do protetor bucal em implante dentário frente à impacto análise experimental e elementos finitos Carvalho, Valessa Florindo Método de elementos finitos Implante dentário Protetor bucal Tensão Deformação Copolímero de etileno vinil acetato Finite element analysis Dental implant Mouthguards Stress Strain Ethylenevinylacetate copolymer CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
title_short |
Performance biomecânica e caracterização do protetor bucal em implante dentário frente à impacto análise experimental e elementos finitos |
title_full |
Performance biomecânica e caracterização do protetor bucal em implante dentário frente à impacto análise experimental e elementos finitos |
title_fullStr |
Performance biomecânica e caracterização do protetor bucal em implante dentário frente à impacto análise experimental e elementos finitos |
title_full_unstemmed |
Performance biomecânica e caracterização do protetor bucal em implante dentário frente à impacto análise experimental e elementos finitos |
title_sort |
Performance biomecânica e caracterização do protetor bucal em implante dentário frente à impacto análise experimental e elementos finitos |
author |
Carvalho, Valessa Florindo |
author_facet |
Carvalho, Valessa Florindo |
author_role |
author |
dc.contributor.none.fl_str_mv |
Veríssimo, Crisnicaw http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4485500A2 Soares, Carlos José http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4790296P8 Zanetta-Barbosa, Darceny http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4797156Y8 Bernardes, Sérgio Rocha http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4735654P0 |
dc.contributor.author.fl_str_mv |
Carvalho, Valessa Florindo |
dc.subject.por.fl_str_mv |
Método de elementos finitos Implante dentário Protetor bucal Tensão Deformação Copolímero de etileno vinil acetato Finite element analysis Dental implant Mouthguards Stress Strain Ethylenevinylacetate copolymer CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
topic |
Método de elementos finitos Implante dentário Protetor bucal Tensão Deformação Copolímero de etileno vinil acetato Finite element analysis Dental implant Mouthguards Stress Strain Ethylenevinylacetate copolymer CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
description |
The aim of this study was to characterize the mouthguard material and evaluate mouthguard shock absorption, impact strain and stress behavior in an impact on dental implants inserted in the anterior maxilla. Sixty models were manufactured which were randomly divided into six groups (n=10) varying: implant type, EH external hexagon (Alvim Smart, NEODENT), and MT, Morse taper (Alvim CM, NEODENT); mouthguard type: custom-fitted with two sheets of EVA (BioART), standard self-adapted (Dogma Indútria e Comércio de Plásticos Ltda) and without mouthguard. To characterize the mouthguard material Shore A hardness and thickness of EVA sheets, transparent and pink, and mouthguard were measured. To characterize the deformation of the implant front impact, strain gauge was attached at the palatal surface of the implant abutment and samples were submitted to the impact test at 45° directed in the central buccal side of the crown. Abutment/implant distortion after the impact was calculated by the centroid in standardized XR-images. Six two-dimensional finite element models were created and submitted to nonlinear dynamics analysis of impact, with parameters and factors similar to the strain gauge test. The data were statistically analyzed using factorial analysis of variance and Tukey test (α=0.05). There was no significant difference in Shore A hardness between pink and transparent sheets (P=0.796). Standard self-adapted mouthguard expressed Shore A hardness lower than custom-fitted (P<0.001). The sheet thickness presented standardization of industrial construction. After heat forming process the standard self-adapted mouthguard kept the initial thickness, but the custom-fitted mouthguard suffered significant reduction. The mouthguard presence reduced significantly the strain values (P<0.001), especially the custom-fitted, there is no significant difference between the implant connection type (P=0.547). After impact, there was micro displacement in the implant/abutment, which was more pronounced in the absence of mouthguard use. Implant EH resulted in higher values of stress and strain. The mouthguard shock absorption was 40 to 46% and increased the time of contact of the sphere on impact by reducing the peak of the stress. |
publishDate |
2016 |
dc.date.none.fl_str_mv |
2016-06-22T18:47:41Z 2016-04-26 2016-06-22T18:47:41Z 2016-02-29 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
CARVALHO, Valessa Florindo. Performance biomecânica e caracterização do protetor bucal em implante dentário frente à impacto análise experimental e elementos finitos. 2016. 88 f. Dissertação (Mestrado em Ciências da Saúde) - Universidade Federal de Uberlândia, Uberlândia, 2016. Disponível em: http://doi.org/10.14393/ufu.di.2016.184 https://repositorio.ufu.br/handle/123456789/17036 http://doi.org/10.14393/ufu.di.2016.184 |
identifier_str_mv |
CARVALHO, Valessa Florindo. Performance biomecânica e caracterização do protetor bucal em implante dentário frente à impacto análise experimental e elementos finitos. 2016. 88 f. Dissertação (Mestrado em Ciências da Saúde) - Universidade Federal de Uberlândia, Uberlândia, 2016. Disponível em: http://doi.org/10.14393/ufu.di.2016.184 |
url |
https://repositorio.ufu.br/handle/123456789/17036 http://doi.org/10.14393/ufu.di.2016.184 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia BR Programa de Pós-graduação em Odontologia Ciências da Saúde UFU |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia BR Programa de Pós-graduação em Odontologia Ciências da Saúde UFU |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1805397032367554560 |