Distribuição dos lotes de cargas procurando maximizar o carregamento em semi-reboques do tipo baú sem causar excesso de peso
Ano de defesa: | 2007 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal de Uberlândia
BR Programa de Pós-graduação em Engenharia Civil Engenharias UFU |
Programa de Pós-Graduação: |
Não Informado pela instituição
|
Departamento: |
Não Informado pela instituição
|
País: |
Não Informado pela instituição
|
Palavras-chave em Português: | |
Link de acesso: | https://repositorio.ufu.br/handle/123456789/14238 |
Resumo: | The traffic of vehicles used into the highway transportation of cargoes with overweight at this country, that's a recurrent problem of extreme gravity, in as much as this excess , acts reducing the service period that highways. The crescent competitive sector of the products distribution completed the organizations to improve their procedures , creating the method of loads transfer, but the utilization of this method is demaged due to the overweight into the tract unit rear axle, even when the semi-plaster is loaded with values of weight far below of the permitted on law. We can stress this shipment made with values beyond from the foreseen on law bring many problems on the operation of cargoes transportation, as the overweight fine and the requirement of the loads excess to be transhipped to another vehicle, generates delays and increasing the costs of the whole process, acting on the company competitiveness, injuring the pavement. Then, the objective of this work is offer a solution that could be technique and, at the same time, a low cost investment, to the sector companies, mainly, for the ones that uses sets of two axles unit tract and semi - plaster of triple tandem axle. Providing the results of a cargo into the rear axle tract unit and of the triple tandem axle, through the calculations of static balance considering the stowage factor and the weight force application point from of each lot of loads in relation to the tract unit rear axle. In this way, it offered a necessary ambiance for the case study, the company increases the average weight loaded for semi-plaster in 22,95%, without overweight. |
id |
UFU_2fac9e91e0fb1e390bdbc666721aa707 |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/14238 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
Distribuição dos lotes de cargas procurando maximizar o carregamento em semi-reboques do tipo baú sem causar excesso de pesoCargo distribution to maximize the loading in truck semi plasters without overweightTransporte de cargasFator de estivaForça pesoUnidade tratoraTransporte de mercadoriasCargo transportationStowage factorWeight forceTract unitCNPQ::ENGENHARIAS::ENGENHARIA CIVILThe traffic of vehicles used into the highway transportation of cargoes with overweight at this country, that's a recurrent problem of extreme gravity, in as much as this excess , acts reducing the service period that highways. The crescent competitive sector of the products distribution completed the organizations to improve their procedures , creating the method of loads transfer, but the utilization of this method is demaged due to the overweight into the tract unit rear axle, even when the semi-plaster is loaded with values of weight far below of the permitted on law. We can stress this shipment made with values beyond from the foreseen on law bring many problems on the operation of cargoes transportation, as the overweight fine and the requirement of the loads excess to be transhipped to another vehicle, generates delays and increasing the costs of the whole process, acting on the company competitiveness, injuring the pavement. Then, the objective of this work is offer a solution that could be technique and, at the same time, a low cost investment, to the sector companies, mainly, for the ones that uses sets of two axles unit tract and semi - plaster of triple tandem axle. Providing the results of a cargo into the rear axle tract unit and of the triple tandem axle, through the calculations of static balance considering the stowage factor and the weight force application point from of each lot of loads in relation to the tract unit rear axle. In this way, it offered a necessary ambiance for the case study, the company increases the average weight loaded for semi-plaster in 22,95%, without overweight.Mestre em Engenharia CivilO trânsito de veículos utilizados no transporte rodoviário de cargas com excesso de peso no país é um problema recorrente e de extremada gravidade, já que esse excesso, atua como limitador da vida útil dessas rodovias. A crescente competitividade do setor de distribuição de produtos fez as empresas aprimorarem seus procedimentos, criando o método de transferência de carga, mas a utilização deste método está prejudicando pelo excesso de peso no eixo traseiro da unidade tratora, mesmo quando o semi-reboque é carregado com valores de carga bem abaixo do permitido na legislação. Cabe ressaltar que esse carregamento feito com valores além dos previstos na legislação acarreta muitos problemas à operação de transportes de cargas, como a lavratura de multa referente ao excesso de peso e a exigência do transbordo do excesso de carga para outro veículo, gerando atrasos e onerosidade em todo o processo, influenciando na competitividade da empresa, e danificando o pavimento. Assim, esse trabalho tem por objetivo oferecer uma solução que seja técnica e, ao mesmo tempo, de baixo investimento, às empresas do setor, notadamente, àquelas que utilizam conjuntos de unidade tratora de dois eixos e semireboque de eixo tandem triplo. Fornecendo as resultantes de um dado carregamento no eixo traseiro da unidade tratora e do eixo tandem triplo, através de cálculos de equilíbrio estático que considerarão o fator de estiva e o ponto de aplicação da força peso de cada lote de carga em relação ao eixo traseiro da unidade tratora. Desta forma, ofereceu meios necessários para que no estudo de caso, a empresa aumentasse o peso médio carregado por semi-reboque em 22,95%, sem incorrer em excesso de peso.Universidade Federal de UberlândiaBRPrograma de Pós-graduação em Engenharia CivilEngenhariasUFUFaria, Carlos Albertohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4785412J3Miotto, Cláudio Luizhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4758881U2Caixeta Filho, José Vicentehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4721415A2Souza, Cezar Augusto Matos e2016-06-22T18:37:35Z2016-03-152016-06-22T18:37:35Z2007-09-25info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfapplication/pdfSOUZA, Cezar Augusto Matos e. Cargo distribution to maximize the loading in truck semi plasters without overweight. 2007. 131 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2007.https://repositorio.ufu.br/handle/123456789/14238porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2017-06-27T13:45:26Zoai:repositorio.ufu.br:123456789/14238Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2017-06-27T13:45:26Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.none.fl_str_mv |
Distribuição dos lotes de cargas procurando maximizar o carregamento em semi-reboques do tipo baú sem causar excesso de peso Cargo distribution to maximize the loading in truck semi plasters without overweight |
title |
Distribuição dos lotes de cargas procurando maximizar o carregamento em semi-reboques do tipo baú sem causar excesso de peso |
spellingShingle |
Distribuição dos lotes de cargas procurando maximizar o carregamento em semi-reboques do tipo baú sem causar excesso de peso Souza, Cezar Augusto Matos e Transporte de cargas Fator de estiva Força peso Unidade tratora Transporte de mercadorias Cargo transportation Stowage factor Weight force Tract unit CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
title_short |
Distribuição dos lotes de cargas procurando maximizar o carregamento em semi-reboques do tipo baú sem causar excesso de peso |
title_full |
Distribuição dos lotes de cargas procurando maximizar o carregamento em semi-reboques do tipo baú sem causar excesso de peso |
title_fullStr |
Distribuição dos lotes de cargas procurando maximizar o carregamento em semi-reboques do tipo baú sem causar excesso de peso |
title_full_unstemmed |
Distribuição dos lotes de cargas procurando maximizar o carregamento em semi-reboques do tipo baú sem causar excesso de peso |
title_sort |
Distribuição dos lotes de cargas procurando maximizar o carregamento em semi-reboques do tipo baú sem causar excesso de peso |
author |
Souza, Cezar Augusto Matos e |
author_facet |
Souza, Cezar Augusto Matos e |
author_role |
author |
dc.contributor.none.fl_str_mv |
Faria, Carlos Alberto http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4785412J3 Miotto, Cláudio Luiz http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4758881U2 Caixeta Filho, José Vicente http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4721415A2 |
dc.contributor.author.fl_str_mv |
Souza, Cezar Augusto Matos e |
dc.subject.por.fl_str_mv |
Transporte de cargas Fator de estiva Força peso Unidade tratora Transporte de mercadorias Cargo transportation Stowage factor Weight force Tract unit CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
topic |
Transporte de cargas Fator de estiva Força peso Unidade tratora Transporte de mercadorias Cargo transportation Stowage factor Weight force Tract unit CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
description |
The traffic of vehicles used into the highway transportation of cargoes with overweight at this country, that's a recurrent problem of extreme gravity, in as much as this excess , acts reducing the service period that highways. The crescent competitive sector of the products distribution completed the organizations to improve their procedures , creating the method of loads transfer, but the utilization of this method is demaged due to the overweight into the tract unit rear axle, even when the semi-plaster is loaded with values of weight far below of the permitted on law. We can stress this shipment made with values beyond from the foreseen on law bring many problems on the operation of cargoes transportation, as the overweight fine and the requirement of the loads excess to be transhipped to another vehicle, generates delays and increasing the costs of the whole process, acting on the company competitiveness, injuring the pavement. Then, the objective of this work is offer a solution that could be technique and, at the same time, a low cost investment, to the sector companies, mainly, for the ones that uses sets of two axles unit tract and semi - plaster of triple tandem axle. Providing the results of a cargo into the rear axle tract unit and of the triple tandem axle, through the calculations of static balance considering the stowage factor and the weight force application point from of each lot of loads in relation to the tract unit rear axle. In this way, it offered a necessary ambiance for the case study, the company increases the average weight loaded for semi-plaster in 22,95%, without overweight. |
publishDate |
2007 |
dc.date.none.fl_str_mv |
2007-09-25 2016-06-22T18:37:35Z 2016-03-15 2016-06-22T18:37:35Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
SOUZA, Cezar Augusto Matos e. Cargo distribution to maximize the loading in truck semi plasters without overweight. 2007. 131 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2007. https://repositorio.ufu.br/handle/123456789/14238 |
identifier_str_mv |
SOUZA, Cezar Augusto Matos e. Cargo distribution to maximize the loading in truck semi plasters without overweight. 2007. 131 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2007. |
url |
https://repositorio.ufu.br/handle/123456789/14238 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia BR Programa de Pós-graduação em Engenharia Civil Engenharias UFU |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia BR Programa de Pós-graduação em Engenharia Civil Engenharias UFU |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1805397048928763904 |