Exportação concluída — 

Simulação acústica de espectros sonoros e barreiras em subestação de energia

Detalhes bibliográficos
Ano de defesa: 2022
Autor(a) principal: Silva, Mateus da
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade de Passo Fundo
Faculdade de Engenharia e Arquitetura – FEAR
Brasil
UPF
Programa de Pós-Graduação em Projeto e Processos de Fabricação
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: https://repositorio.upf.br/handle/123456789/4153
Resumo: Electric power substations are increasingly inserted in urban environments, making the noise generated by power transformers a recurring discomfort for the population. In order to improve social welfare, two studies were carried out through acoustic simulations, the first being the evaluation of the simulation program tools and other types of noise spectra generated by transformers, thus seeking ways to evaluate the noise. before installing the equipment in a substation to be built and also the possibility of simulating a substation without the need for onsite measurements. The second stage of the study sought, through acoustic simulations, to verify the effectiveness of different geometries of acoustic barriers in mitigating the sound pressure level in homes close to a substation. In order to guarantee a correct simulation, data referring to the noise generated by the transformers in a real substation were collected, both for the purposes of noise characterization and for data referring to the sound pressure level in the substation region. With this, the real values were compared with the simulated values, and later the sound mitigation capacity was simulated with the insertion of acoustic barriers. Such barriers could influence the form of noise dispersion depending on its proximity to the source, its geometry and height. Among the 4 forms of simulated barriers, values from 3 to 17 dB(A) of loss by insertion of barriers were found. During the evaluation of the spectra, which were obtained through the simulation software and the literature, it was possible to verify that the spectrum generated by the software presented values that were too high and therefore unreliable. The spectrum found in the literature presented plausible values, however its use is restricted, since the variations presented between it and the real spectrum had values of up to 8.6% of difference.
id UPF_90100fecffaf2cf11c8defe751b85232
oai_identifier_str oai:repositorio.upf.br:123456789/4153
network_acronym_str UPF
network_name_str Repositório Institucional da UPF
repository_id_str
spelling Simulação acústica de espectros sonoros e barreiras em subestação de energiaProcessos de fabricaçãoSubestações elétricasRuído industrialAcústicaPoluição sonoraENGENHARIA CIVIL::CONSTRUCAO CIVILElectric power substations are increasingly inserted in urban environments, making the noise generated by power transformers a recurring discomfort for the population. In order to improve social welfare, two studies were carried out through acoustic simulations, the first being the evaluation of the simulation program tools and other types of noise spectra generated by transformers, thus seeking ways to evaluate the noise. before installing the equipment in a substation to be built and also the possibility of simulating a substation without the need for onsite measurements. The second stage of the study sought, through acoustic simulations, to verify the effectiveness of different geometries of acoustic barriers in mitigating the sound pressure level in homes close to a substation. In order to guarantee a correct simulation, data referring to the noise generated by the transformers in a real substation were collected, both for the purposes of noise characterization and for data referring to the sound pressure level in the substation region. With this, the real values were compared with the simulated values, and later the sound mitigation capacity was simulated with the insertion of acoustic barriers. Such barriers could influence the form of noise dispersion depending on its proximity to the source, its geometry and height. Among the 4 forms of simulated barriers, values from 3 to 17 dB(A) of loss by insertion of barriers were found. During the evaluation of the spectra, which were obtained through the simulation software and the literature, it was possible to verify that the spectrum generated by the software presented values that were too high and therefore unreliable. The spectrum found in the literature presented plausible values, however its use is restricted, since the variations presented between it and the real spectrum had values of up to 8.6% of difference.Subestações de energia elétrica estão cada vez mais inseridas em ambientes urbanos, tornando o ruído gerado pelos transformadores de potência um desconforto recorrente para a população. Com o intuito de melhorar o bem estar social, foram realizados dois estudos por meio de simulações acústicas, sendo o primeiro a avaliação das ferramentas do programa de simulação e de outros tipos de espectros de ruído gerados por transformadores, buscando assim formas de avaliar o ruído antes da instalação dos equipamentos em uma subestação a ser construída e também a possibilidade de simular uma subestação sem a necessidade de medições - . A segunda etapa do estudo buscou por meio de simulações acústicas verificar a eficácia de diferentes geometrias de barreiras acústicas na mitigação do nível de pressão sonora nas residências próximas de uma subestação. Para garantir uma correta simulação foram coletados dados referentes ao ruído gerado pelos transformadores em uma subestação real, tanto para fins de caracterização do ruído, como para dados referentes ao nível de pressão sonora na região da subestação. Com isso comparou-se os valores reais com os valores simulados, e posteriormente simulou-se a capacidade de mitigação do som com a inserção de barreiras acústicas. Tais barreiras puderam influenciar na forma de dispersão do ruído dependendo de sua proximidade da fonte, de sua geometria e altura. Dentre as 4 formas de barreiras simuladas foram encontrados valores de 3 a 17 dB(A) de perda por inserção das barreiras. Durante a avaliação dos espectros, que foram obtidos por meio do software de simulação e da literatura, foi possível verificar que o espectro gerado pelo software apresentou valores demasiadamente elevados e com isso não confiável. O espectro encontrado na literatura apresentou valores plausíveis, entretanto seu uso é restrito, pois as variações apresentadas entre ele e o espectro real tiveram valores de até 8,6% de diferença.Universidade de Passo FundoFaculdade de Engenharia e Arquitetura – FEARBrasilUPFPrograma de Pós-Graduação em Projeto e Processos de FabricaçãoIsrael, Charles Leonardohttp://lattes.cnpq.br/7302070158208102Silva, Mateus da2025-05-07T18:08:45Z2022-04-25info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfapplication/pdfSILVA, Mateus da. Simulação acústica de espectros sonoros e barreiras em subestação de energia. 2022. 146 f. Dissertação (Mestrado em Projeto e Processos de Fabricação) - Universidade de Passo Fundo, Passo Fundo, RS, 2022.https://repositorio.upf.br/handle/123456789/4153porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UPFinstname:Universidade de Passo Fundo (UPF)instacron:UPF2025-10-23T12:41:38Zoai:repositorio.upf.br:123456789/4153Repositório InstitucionalPRIhttp://repositorio.upf.br/oai/requestjucelei@upf.br||biblio@upf.bropendoar:16102025-10-23T12:41:38Repositório Institucional da UPF - Universidade de Passo Fundo (UPF)false
dc.title.none.fl_str_mv Simulação acústica de espectros sonoros e barreiras em subestação de energia
title Simulação acústica de espectros sonoros e barreiras em subestação de energia
spellingShingle Simulação acústica de espectros sonoros e barreiras em subestação de energia
Silva, Mateus da
Processos de fabricação
Subestações elétricas
Ruído industrial
Acústica
Poluição sonora
ENGENHARIA CIVIL::CONSTRUCAO CIVIL
title_short Simulação acústica de espectros sonoros e barreiras em subestação de energia
title_full Simulação acústica de espectros sonoros e barreiras em subestação de energia
title_fullStr Simulação acústica de espectros sonoros e barreiras em subestação de energia
title_full_unstemmed Simulação acústica de espectros sonoros e barreiras em subestação de energia
title_sort Simulação acústica de espectros sonoros e barreiras em subestação de energia
author Silva, Mateus da
author_facet Silva, Mateus da
author_role author
dc.contributor.none.fl_str_mv Israel, Charles Leonardo
http://lattes.cnpq.br/7302070158208102
dc.contributor.author.fl_str_mv Silva, Mateus da
dc.subject.por.fl_str_mv Processos de fabricação
Subestações elétricas
Ruído industrial
Acústica
Poluição sonora
ENGENHARIA CIVIL::CONSTRUCAO CIVIL
topic Processos de fabricação
Subestações elétricas
Ruído industrial
Acústica
Poluição sonora
ENGENHARIA CIVIL::CONSTRUCAO CIVIL
description Electric power substations are increasingly inserted in urban environments, making the noise generated by power transformers a recurring discomfort for the population. In order to improve social welfare, two studies were carried out through acoustic simulations, the first being the evaluation of the simulation program tools and other types of noise spectra generated by transformers, thus seeking ways to evaluate the noise. before installing the equipment in a substation to be built and also the possibility of simulating a substation without the need for onsite measurements. The second stage of the study sought, through acoustic simulations, to verify the effectiveness of different geometries of acoustic barriers in mitigating the sound pressure level in homes close to a substation. In order to guarantee a correct simulation, data referring to the noise generated by the transformers in a real substation were collected, both for the purposes of noise characterization and for data referring to the sound pressure level in the substation region. With this, the real values were compared with the simulated values, and later the sound mitigation capacity was simulated with the insertion of acoustic barriers. Such barriers could influence the form of noise dispersion depending on its proximity to the source, its geometry and height. Among the 4 forms of simulated barriers, values from 3 to 17 dB(A) of loss by insertion of barriers were found. During the evaluation of the spectra, which were obtained through the simulation software and the literature, it was possible to verify that the spectrum generated by the software presented values that were too high and therefore unreliable. The spectrum found in the literature presented plausible values, however its use is restricted, since the variations presented between it and the real spectrum had values of up to 8.6% of difference.
publishDate 2022
dc.date.none.fl_str_mv 2022-04-25
2025-05-07T18:08:45Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv SILVA, Mateus da. Simulação acústica de espectros sonoros e barreiras em subestação de energia. 2022. 146 f. Dissertação (Mestrado em Projeto e Processos de Fabricação) - Universidade de Passo Fundo, Passo Fundo, RS, 2022.
https://repositorio.upf.br/handle/123456789/4153
identifier_str_mv SILVA, Mateus da. Simulação acústica de espectros sonoros e barreiras em subestação de energia. 2022. 146 f. Dissertação (Mestrado em Projeto e Processos de Fabricação) - Universidade de Passo Fundo, Passo Fundo, RS, 2022.
url https://repositorio.upf.br/handle/123456789/4153
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Universidade de Passo Fundo
Faculdade de Engenharia e Arquitetura – FEAR
Brasil
UPF
Programa de Pós-Graduação em Projeto e Processos de Fabricação
publisher.none.fl_str_mv Universidade de Passo Fundo
Faculdade de Engenharia e Arquitetura – FEAR
Brasil
UPF
Programa de Pós-Graduação em Projeto e Processos de Fabricação
dc.source.none.fl_str_mv reponame:Repositório Institucional da UPF
instname:Universidade de Passo Fundo (UPF)
instacron:UPF
instname_str Universidade de Passo Fundo (UPF)
instacron_str UPF
institution UPF
reponame_str Repositório Institucional da UPF
collection Repositório Institucional da UPF
repository.name.fl_str_mv Repositório Institucional da UPF - Universidade de Passo Fundo (UPF)
repository.mail.fl_str_mv jucelei@upf.br||biblio@upf.br
_version_ 1864264062675714048