Pós-tratamento físico-químico de efluente sanitário para remoção de fósforo

Detalhes bibliográficos
Ano de defesa: 2011
Autor(a) principal: Baccarin, Lindsay Iara Pegoraro
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Engenharias
Programa de Pós-Graduação em Engenharia
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: https://repositorio.upf.br/handle/123456789/2798
Resumo: The wastewater, even after primary and secondary treatment, may contain organic matter and nutrients such as phosphorus. Which are causing negative impact when released in water body receptors by their accumulation in the aquatic environment, interfering with the natural biological cycle. In this context, alternative effluent technologies are being extensively studied such as physical-chemical processes including coagulation followed by flocculation and subsequent sedimentation as post-treatment of effluents before their discarding in water body receptors. The main goals of this work were quantification of different forms of phosphorus and the study of physical-chemical treatment by flocculation and sedimentation using inorganic salts (ferric chloride, aluminum sulfate, calcium oxide and calcium chloride), as an alternative after the conventional biological treatment, in the wastewater sanitary ETE of the Passo Fundo University. The results showed that the soluble phosphorous forms are the main forms in the final sanitary effluent. The quantification of these different phosphorous fractions facilitates the evaluation of each coagulant agent used in the different concentrations. The ferric chloride at concentration of 250 mg/L showed the best total phosphorous remotion taxes. At this concentration the total phosphorous concentration decreased from 16 mg/L to 3 mg/L after the treatment. The aluminum sulfate showed efficiency similar to ferric chloride. The minimization of the organic matter and nutrients suchas phosphorous at the sanitary effluent by use of this post treatment will contribute with a less impacting effluent deposition.
id UPF_9936360499155255e36dac5f0d910cfe
oai_identifier_str oai:repositorio.upf.br:123456789/2798
network_acronym_str UPF
network_name_str Repositório Institucional da UPF
repository_id_str
spelling Pós-tratamento físico-químico de efluente sanitário para remoção de fósforoÁguas residuais - PurificaçãoEsgotosEngenharia sanitáriaFósforoSewage - PurificationSewerageSanitary engineeringPhosphorusCNPQ::ENGENHARIAS::ENGENHARIA SANITARIA::TRATAMENTO DE AGUAS DE ABASTECIMENTO E RESIDUARIASThe wastewater, even after primary and secondary treatment, may contain organic matter and nutrients such as phosphorus. Which are causing negative impact when released in water body receptors by their accumulation in the aquatic environment, interfering with the natural biological cycle. In this context, alternative effluent technologies are being extensively studied such as physical-chemical processes including coagulation followed by flocculation and subsequent sedimentation as post-treatment of effluents before their discarding in water body receptors. The main goals of this work were quantification of different forms of phosphorus and the study of physical-chemical treatment by flocculation and sedimentation using inorganic salts (ferric chloride, aluminum sulfate, calcium oxide and calcium chloride), as an alternative after the conventional biological treatment, in the wastewater sanitary ETE of the Passo Fundo University. The results showed that the soluble phosphorous forms are the main forms in the final sanitary effluent. The quantification of these different phosphorous fractions facilitates the evaluation of each coagulant agent used in the different concentrations. The ferric chloride at concentration of 250 mg/L showed the best total phosphorous remotion taxes. At this concentration the total phosphorous concentration decreased from 16 mg/L to 3 mg/L after the treatment. The aluminum sulfate showed efficiency similar to ferric chloride. The minimization of the organic matter and nutrients suchas phosphorous at the sanitary effluent by use of this post treatment will contribute with a less impacting effluent deposition.Os efluentes sanitários, mesmo após tratamento primário e secundário, ainda podem conter matéria orgânica e nutrientes como o fósforo. Estes vêm causando impacto negativo quando lançados em corpos hídricos receptores por seu acúmulo no ambiente aquático, interferindo no ciclo biológico natural. Neste contexto, vem sendo amplamente estudado a utilização de tecnologias alternativas, como processos físico-químicos, entre eles a coagulação seguida de floculação e posterior sedimentação, para o pós-tratamento destes efluentes, antes que os mesmos sejam descartados nos corpos hídricos receptores. Este trabalho teve como principais objetivos: a quantificação das diferentes formas de fósforo existentes no efluente sanitário e o estudo do tratamento físico-químico por floculação e sedimentação com o uso de sais inorgânicos (cloreto férrico, sulfato de alumínio, óxido e cloreto de cálcio), como uma alternativa após o tratamento biológico convencional da ETE da Universidade de Passo Fundo. Os resultados desta pesquisa mostram que as formas solúveis do fósforo são as formas predominantes no efluente sanitário final. A quantificação das diferentes frações de fósforo possibilitou a avaliação individual das eficiências de cada coagulante utilizado e suas diferentes concentrações. As maiores remoções de fósforo total foram obtidas utilizando-se do coagulante cloreto férrico na concentração de 250 mg/L. Nestas condições o fósforo total inicial passou de 16 mg/L para 3 mg/L após o tratamento. O coagulante sulfato de alumínio apresentou eficiências próximas ao cloreto férrico. Com a minimização da matéria orgânica e nutrientes como o fósforo, o pós-tratamento para o efluente sanitário contribuirá de maneira a um despejo menos impactante no corpo hídrico receptorEngenhariasPrograma de Pós-Graduação em EngenhariaHemkemeier, Marcelohttp://lattes.cnpq.br/1369101484238907Baccarin, Lindsay Iara Pegoraro2025-05-07T14:29:48Z2011-03-03info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfapplication/pdfhttps://repositorio.upf.br/handle/123456789/2798porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UPFinstname:Universidade de Passo Fundo (UPF)instacron:UPF2025-12-08T12:11:05Zoai:repositorio.upf.br:123456789/2798Repositório InstitucionalPRIhttp://repositorio.upf.br/oai/requestjucelei@upf.br||biblio@upf.bropendoar:16102025-12-08T12:11:05Repositório Institucional da UPF - Universidade de Passo Fundo (UPF)false
dc.title.none.fl_str_mv Pós-tratamento físico-químico de efluente sanitário para remoção de fósforo
title Pós-tratamento físico-químico de efluente sanitário para remoção de fósforo
spellingShingle Pós-tratamento físico-químico de efluente sanitário para remoção de fósforo
Baccarin, Lindsay Iara Pegoraro
Águas residuais - Purificação
Esgotos
Engenharia sanitária
Fósforo
Sewage - Purification
Sewerage
Sanitary engineering
Phosphorus
CNPQ::ENGENHARIAS::ENGENHARIA SANITARIA::TRATAMENTO DE AGUAS DE ABASTECIMENTO E RESIDUARIAS
title_short Pós-tratamento físico-químico de efluente sanitário para remoção de fósforo
title_full Pós-tratamento físico-químico de efluente sanitário para remoção de fósforo
title_fullStr Pós-tratamento físico-químico de efluente sanitário para remoção de fósforo
title_full_unstemmed Pós-tratamento físico-químico de efluente sanitário para remoção de fósforo
title_sort Pós-tratamento físico-químico de efluente sanitário para remoção de fósforo
author Baccarin, Lindsay Iara Pegoraro
author_facet Baccarin, Lindsay Iara Pegoraro
author_role author
dc.contributor.none.fl_str_mv Hemkemeier, Marcelo
http://lattes.cnpq.br/1369101484238907
dc.contributor.author.fl_str_mv Baccarin, Lindsay Iara Pegoraro
dc.subject.por.fl_str_mv Águas residuais - Purificação
Esgotos
Engenharia sanitária
Fósforo
Sewage - Purification
Sewerage
Sanitary engineering
Phosphorus
CNPQ::ENGENHARIAS::ENGENHARIA SANITARIA::TRATAMENTO DE AGUAS DE ABASTECIMENTO E RESIDUARIAS
topic Águas residuais - Purificação
Esgotos
Engenharia sanitária
Fósforo
Sewage - Purification
Sewerage
Sanitary engineering
Phosphorus
CNPQ::ENGENHARIAS::ENGENHARIA SANITARIA::TRATAMENTO DE AGUAS DE ABASTECIMENTO E RESIDUARIAS
description The wastewater, even after primary and secondary treatment, may contain organic matter and nutrients such as phosphorus. Which are causing negative impact when released in water body receptors by their accumulation in the aquatic environment, interfering with the natural biological cycle. In this context, alternative effluent technologies are being extensively studied such as physical-chemical processes including coagulation followed by flocculation and subsequent sedimentation as post-treatment of effluents before their discarding in water body receptors. The main goals of this work were quantification of different forms of phosphorus and the study of physical-chemical treatment by flocculation and sedimentation using inorganic salts (ferric chloride, aluminum sulfate, calcium oxide and calcium chloride), as an alternative after the conventional biological treatment, in the wastewater sanitary ETE of the Passo Fundo University. The results showed that the soluble phosphorous forms are the main forms in the final sanitary effluent. The quantification of these different phosphorous fractions facilitates the evaluation of each coagulant agent used in the different concentrations. The ferric chloride at concentration of 250 mg/L showed the best total phosphorous remotion taxes. At this concentration the total phosphorous concentration decreased from 16 mg/L to 3 mg/L after the treatment. The aluminum sulfate showed efficiency similar to ferric chloride. The minimization of the organic matter and nutrients suchas phosphorous at the sanitary effluent by use of this post treatment will contribute with a less impacting effluent deposition.
publishDate 2011
dc.date.none.fl_str_mv 2011-03-03
2025-05-07T14:29:48Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://repositorio.upf.br/handle/123456789/2798
url https://repositorio.upf.br/handle/123456789/2798
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Engenharias
Programa de Pós-Graduação em Engenharia
publisher.none.fl_str_mv Engenharias
Programa de Pós-Graduação em Engenharia
dc.source.none.fl_str_mv reponame:Repositório Institucional da UPF
instname:Universidade de Passo Fundo (UPF)
instacron:UPF
instname_str Universidade de Passo Fundo (UPF)
instacron_str UPF
institution UPF
reponame_str Repositório Institucional da UPF
collection Repositório Institucional da UPF
repository.name.fl_str_mv Repositório Institucional da UPF - Universidade de Passo Fundo (UPF)
repository.mail.fl_str_mv jucelei@upf.br||biblio@upf.br
_version_ 1864264051339558912