Propriedades físico-hídricas de latossolos sob plantio direto e sua relação com a trabalhabilidade

Detalhes bibliográficos
Ano de defesa: 2019
Autor(a) principal: Broch, Djulia Taís
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Tese
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade de Passo Fundo
Faculdade de Agronomia e Medicina Veterinária – FAMV
Brasil
UPF
Programa de Pós-Graduação em Agronomia
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: https://repositorio.upf.br/handle/123456789/9279
Resumo: The soil is the main substrate used by plants, becoming important the knowledge of water storage and the relationship with the attributes of the soil. Sowing under inadequate moisture conditions can result in the adherence of the soil to implement devices, changing the sowing depth and developing problems in the establishment of the crop. Knowledgement about soil workability can reduce the risk of degradation of it and the energy required for the machine operations. The go of this research was to set a relationship between physical-hydrological properties and the workability of LATOSSOLOS (oxisol) conducted under no-tillage. Samples with preserved and not preserved structure were collected at five depths of five soils in Rio Grande do Sul (BR), under no-tillage system. Particle size, organic matter (MO), soil density (DS), maximum soil density (Dsmax), relative density (DR), the moisture on the field capacity (CC) and permanent wilting point (PMP), total porosity (PT) and the distribution of the pores diameter, soil consistency, water retention curve, optimal water range (IHO), water content of the soil where adhesion occurs and germination of soybean seeds. The results proved that the collected soils show different granulometric compositions and organic matter contents. The values obtained for the DS range were 1,167 to 1,660 g / cm³, therefore higher DR values found, indicated soil compaction. Higher penetration resistance (RP) values provide a lower limit than decreased IHO. Soils with more sand in their composition retain less water, while the clay ones showed greater retention. The optimal compaction moisture (UOC) increased with clay soils and MO content. The soil water content, where soil adherence at the seeding device began, had a range of 0.236 to 0.340 g / g among the studied soils, which was influenced by clay and MO contents. The soil moisture that occurred soybean seeds germination ranged from 0.150 to 0.302 g / g, being influenced by the clay content. The physical-hydrological properties are related to soil workability. The UOC is lower than the adherence and might be observed to establish a proper sowing window.
id UPF_aa61e0390d4e27d9d9e3fefa530686ea
oai_identifier_str oai:repositorio.upf.br:123456789/9279
network_acronym_str UPF
network_name_str Repositório Institucional da UPF
repository_id_str
spelling Propriedades físico-hídricas de latossolos sob plantio direto e sua relação com a trabalhabilidadePhysical and water properties of oxisols under no-tillage and its relationship with workabilitySemeaduraLatossolosPlantio (Cultivo de plantas)CIENCIAS AGRARIAS::AGRONOMIAThe soil is the main substrate used by plants, becoming important the knowledge of water storage and the relationship with the attributes of the soil. Sowing under inadequate moisture conditions can result in the adherence of the soil to implement devices, changing the sowing depth and developing problems in the establishment of the crop. Knowledgement about soil workability can reduce the risk of degradation of it and the energy required for the machine operations. The go of this research was to set a relationship between physical-hydrological properties and the workability of LATOSSOLOS (oxisol) conducted under no-tillage. Samples with preserved and not preserved structure were collected at five depths of five soils in Rio Grande do Sul (BR), under no-tillage system. Particle size, organic matter (MO), soil density (DS), maximum soil density (Dsmax), relative density (DR), the moisture on the field capacity (CC) and permanent wilting point (PMP), total porosity (PT) and the distribution of the pores diameter, soil consistency, water retention curve, optimal water range (IHO), water content of the soil where adhesion occurs and germination of soybean seeds. The results proved that the collected soils show different granulometric compositions and organic matter contents. The values obtained for the DS range were 1,167 to 1,660 g / cm³, therefore higher DR values found, indicated soil compaction. Higher penetration resistance (RP) values provide a lower limit than decreased IHO. Soils with more sand in their composition retain less water, while the clay ones showed greater retention. The optimal compaction moisture (UOC) increased with clay soils and MO content. The soil water content, where soil adherence at the seeding device began, had a range of 0.236 to 0.340 g / g among the studied soils, which was influenced by clay and MO contents. The soil moisture that occurred soybean seeds germination ranged from 0.150 to 0.302 g / g, being influenced by the clay content. The physical-hydrological properties are related to soil workability. The UOC is lower than the adherence and might be observed to establish a proper sowing window.O solo é o principal substrato utilizado pelas plantas, tornando importante o conhecimento do armazenamento de água e sua relação com os atributos do solo. A semeadura em condições inadequadas de umidade é capaz de acarretar aderência do solo nos dispositivos do implemento, o que acaba por alterar a profundidade de semeadura, gerando problemas no estabelecimento da cultura. O conhecimento a respeito da trabalhabilidade do solo pode reduzir o risco de degradação e a necessidade de energia para as operações. O objetivo desse trabalho foi determinar a relação entre as propriedades físico-hídricas e a trabalhabilidade de Latossolos conduzidos sob plantio direto. Foram coletadas amostras com estrutura preservada e não preservada em cinco profundidades de cinco solos do Rio Grande do Sul, sob sistema plantio direto. Determinaram-se a composição granulométrica, o teor de matéria orgânica (MO), a densidade do solo (DS), a densidade do solo máxima (Dsmáx), a densidade relativa (DR), a umidade na capacidade de campo (CC) e no ponto de murcha permanente (PMP), a porosidade total (PT) e a distribuição do diâmetro dos poros, a consistência do solo, sua curva de retenção de água, intervalo hídrico ótimo (IHO), teor de água onde ocorre a aderência do solo e a germinação de sementes de soja. Os resultados mostraram que os solos coletados apresentaram distintas composições granulométricas e teores de matéria orgânica. Os valores obtidos de DS variaram entre 1,167 a 1,660 g/cm³, por sua vez valores altos de DR encontrados indicaram solos compactados. Elevados valores de resistência a penetração (RP) proporcionaram um limite inferior do IHO diminuto. Os solos com mais areia em sua composição tenderam a reter menos água, enquanto os mais argilosos demostraram uma maior retenção. A umidade ótima de compacaçao (UOC) aumentou com o teor de argila e MO do solo. O teor de água no solo onde iniciou-se a aderência do solo no dispositivo de semeadora teve uma amplitude de 0,236 a 0,340 g/g dentre os solos estudados, esta foi influenciada pelos teores de argila e MO. A umidade do solo na qual ocorreu a germinação de sementes de soja variou entre 0,150 e 0,302 g/g, sendo influenciada pelo seu teor de argila. As propriedades físico-hídricas do solo têm relação com a trabalhabilidade. A UOC é inferior a aderência, devendo esta ser observada para que se estabeleça uma janela de semeadura adequada.Universidade de Passo FundoFaculdade de Agronomia e Medicina Veterinária – FAMVBrasilUPFPrograma de Pós-Graduação em AgronomiaKlein, Vilson Antoniohttp://lattes.cnpq.br/8469286241035840Broch, Djulia Taís2025-06-20T16:41:57Z2019-08-09info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisapplication/pdfapplication/pdfBROCH, Djulia Taís. Propriedades físico-hídricas de latossolos sob plantio direto e sua relação com a trabalhabilidade. 2019. 88 f. Tese (Doutorado em Agronomia) - Universidade de Passo Fundo, Passo Fundo, RS, 2019.https://repositorio.upf.br/handle/123456789/9279porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UPFinstname:Universidade de Passo Fundo (UPF)instacron:UPF2025-07-24T03:06:07Zoai:repositorio.upf.br:123456789/9279Repositório InstitucionalPRIhttp://repositorio.upf.br/oai/requestjucelei@upf.br||biblio@upf.bropendoar:16102025-07-24T03:06:07Repositório Institucional da UPF - Universidade de Passo Fundo (UPF)false
dc.title.none.fl_str_mv Propriedades físico-hídricas de latossolos sob plantio direto e sua relação com a trabalhabilidade
Physical and water properties of oxisols under no-tillage and its relationship with workability
title Propriedades físico-hídricas de latossolos sob plantio direto e sua relação com a trabalhabilidade
spellingShingle Propriedades físico-hídricas de latossolos sob plantio direto e sua relação com a trabalhabilidade
Broch, Djulia Taís
Semeadura
Latossolos
Plantio (Cultivo de plantas)
CIENCIAS AGRARIAS::AGRONOMIA
title_short Propriedades físico-hídricas de latossolos sob plantio direto e sua relação com a trabalhabilidade
title_full Propriedades físico-hídricas de latossolos sob plantio direto e sua relação com a trabalhabilidade
title_fullStr Propriedades físico-hídricas de latossolos sob plantio direto e sua relação com a trabalhabilidade
title_full_unstemmed Propriedades físico-hídricas de latossolos sob plantio direto e sua relação com a trabalhabilidade
title_sort Propriedades físico-hídricas de latossolos sob plantio direto e sua relação com a trabalhabilidade
author Broch, Djulia Taís
author_facet Broch, Djulia Taís
author_role author
dc.contributor.none.fl_str_mv Klein, Vilson Antonio
http://lattes.cnpq.br/8469286241035840
dc.contributor.author.fl_str_mv Broch, Djulia Taís
dc.subject.por.fl_str_mv Semeadura
Latossolos
Plantio (Cultivo de plantas)
CIENCIAS AGRARIAS::AGRONOMIA
topic Semeadura
Latossolos
Plantio (Cultivo de plantas)
CIENCIAS AGRARIAS::AGRONOMIA
description The soil is the main substrate used by plants, becoming important the knowledge of water storage and the relationship with the attributes of the soil. Sowing under inadequate moisture conditions can result in the adherence of the soil to implement devices, changing the sowing depth and developing problems in the establishment of the crop. Knowledgement about soil workability can reduce the risk of degradation of it and the energy required for the machine operations. The go of this research was to set a relationship between physical-hydrological properties and the workability of LATOSSOLOS (oxisol) conducted under no-tillage. Samples with preserved and not preserved structure were collected at five depths of five soils in Rio Grande do Sul (BR), under no-tillage system. Particle size, organic matter (MO), soil density (DS), maximum soil density (Dsmax), relative density (DR), the moisture on the field capacity (CC) and permanent wilting point (PMP), total porosity (PT) and the distribution of the pores diameter, soil consistency, water retention curve, optimal water range (IHO), water content of the soil where adhesion occurs and germination of soybean seeds. The results proved that the collected soils show different granulometric compositions and organic matter contents. The values obtained for the DS range were 1,167 to 1,660 g / cm³, therefore higher DR values found, indicated soil compaction. Higher penetration resistance (RP) values provide a lower limit than decreased IHO. Soils with more sand in their composition retain less water, while the clay ones showed greater retention. The optimal compaction moisture (UOC) increased with clay soils and MO content. The soil water content, where soil adherence at the seeding device began, had a range of 0.236 to 0.340 g / g among the studied soils, which was influenced by clay and MO contents. The soil moisture that occurred soybean seeds germination ranged from 0.150 to 0.302 g / g, being influenced by the clay content. The physical-hydrological properties are related to soil workability. The UOC is lower than the adherence and might be observed to establish a proper sowing window.
publishDate 2019
dc.date.none.fl_str_mv 2019-08-09
2025-06-20T16:41:57Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/doctoralThesis
format doctoralThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv BROCH, Djulia Taís. Propriedades físico-hídricas de latossolos sob plantio direto e sua relação com a trabalhabilidade. 2019. 88 f. Tese (Doutorado em Agronomia) - Universidade de Passo Fundo, Passo Fundo, RS, 2019.
https://repositorio.upf.br/handle/123456789/9279
identifier_str_mv BROCH, Djulia Taís. Propriedades físico-hídricas de latossolos sob plantio direto e sua relação com a trabalhabilidade. 2019. 88 f. Tese (Doutorado em Agronomia) - Universidade de Passo Fundo, Passo Fundo, RS, 2019.
url https://repositorio.upf.br/handle/123456789/9279
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Universidade de Passo Fundo
Faculdade de Agronomia e Medicina Veterinária – FAMV
Brasil
UPF
Programa de Pós-Graduação em Agronomia
publisher.none.fl_str_mv Universidade de Passo Fundo
Faculdade de Agronomia e Medicina Veterinária – FAMV
Brasil
UPF
Programa de Pós-Graduação em Agronomia
dc.source.none.fl_str_mv reponame:Repositório Institucional da UPF
instname:Universidade de Passo Fundo (UPF)
instacron:UPF
instname_str Universidade de Passo Fundo (UPF)
instacron_str UPF
institution UPF
reponame_str Repositório Institucional da UPF
collection Repositório Institucional da UPF
repository.name.fl_str_mv Repositório Institucional da UPF - Universidade de Passo Fundo (UPF)
repository.mail.fl_str_mv jucelei@upf.br||biblio@upf.br
_version_ 1864264066753626112