Topology optimization of flextensional piezoelectric actuators with active control law.

• Ano de defesa: 2018
• Autor(a) principal: Moretti, Mariana
• Tipo de documento: Tese
• Tipo de acesso: Acesso aberto
• Idioma: eng
• Instituição de defesa: Biblioteca Digitais de Teses e Dissertações da USP
• Palavras-chave em Português: Active control law; Atuadores piezelétricos flextensionais; Flextensional piezoactuator; Método dos elementos finitos; Métodos topológicos (Otimização); Non-collapsed piezoelectric nodes; Sensor; Time-domain transient analysis; Topology optimization method
• Link de acesso: http://www.teses.usp.br/teses/disponiveis/3/3152/tde-20032019-145622/

Flextensional actuators assembled in association with piezoceramics feature the amplification of nanometric displacements generated by the ceramics energy conversion. For applications that require high precision positioning or vibration response attenuation, such as hard disc reading or atomic force microscopy, a response tracking control needs to be implemented. Shell and plate piezoactuators with vibration control have been extensively studied in literature, however the design of controlled piezoelectric systems by means of the Topology Optimization Method (TOM) has not been fully explored in literature yet, and is generally focused on the frequency domain transient analysis, which employs a model reduction method for the sake of computational implementation. Dealing with transient analysis of flextensional piezoelectric actuators, an active closed loop control design is more suited for the positioning and vibration problem, which consists on measuring the outputs of the system by the closed loop sensor layer, whose signal is modified by a control gain and eventually inputted into the actuator layer so the system response signal is modulated. Aiming to enhance the active feedback control in piezoelectric actuators (PEAs), this work targets the design of the flextensional microstructure considering an active velocity feedback control (AVFC), where the active piezoelectric sensing and actuating cycles imply in an extra damping to the system. Therefore, the flextensional mechanism compliance shall be distributed within the design domain by the allocation of void regions where there should be the flexible hinges. Such a design can be accomplished by means of the TOM, which employs a systematic analysis of the dynamic model through the finite element method (FEM). In this work, the finite element (FE) system model takes into account the piezoelectric ceramics intermediate nodes, what is denominated as non-collapsed piezoelectric nodes model, and whose induced voltage during the time domain dynamic response contributes to the active control of the system. The topology optimization (TO) problem is formulated for the system vibration suppression at the restoring position and at the actuated position (positioner) subject to material volume and design variables constraints. The TOM implemented is based on the solid isotropic material with penalization (SIMP), the dynamic adjoint sensitivity, and on the optimization solver known as sequential linear programming (SLP). To illustrate the method, bidimensional examples of optimized topologies are numerically obtained by employing different velocity feedback control gains, and the topologies efficiency are compared and contrasted.