Desenvolvimento de pellets provenientes de madeira e finos de carvão vegetal
| Ano de defesa: | 2019 |
|---|---|
| Autor(a) principal: | |
| Orientador(a): | |
| Banca de defesa: | |
| Tipo de documento: | Dissertação |
| Tipo de acesso: | Acesso aberto |
| Idioma: | por |
| Instituição de defesa: |
Universidade Tecnológica Federal do Paraná
Ponta Grossa Brasil Programa de Pós-Graduação em Engenharia de Produção UTFPR |
| Programa de Pós-Graduação: |
Não Informado pela instituição
|
| Departamento: |
Não Informado pela instituição
|
| País: |
Não Informado pela instituição
|
| Palavras-chave em Português: | |
| Link de acesso: | http://repositorio.utfpr.edu.br/jspui/handle/1/4091 |
Resumo: | With the growing demand for world energy, there is a need for energy sources with the potential to replace fossil fuels like oil, coal and natural gas. An alternative form of energy with high energy potential are pellets, which can be considered as renewable biofuels, have low humidity, homogeneous form and high energy density, and are derived from vegetal biomass. The objective of this work is to develop and characterize pellets from wood with addition of charcoal fines. Three compositions of pellets were produced and compared: sawdust pellets of pinus spp. (P1), pine sawdust pellets with 10% charcoal fines (P2) and 25% charcoal fines (P3). The national and international pellet standards were used for this purpose. The results of the analyzes showed that the addition of charcoal fines can increase the energy potential of the pellets, since the pellets P2 and P3 presented values higher than the pellets P1, in the quality parameters related to the energetic part, such as higher calorific value and lower and energy density. With regard to quality parameters, physical, chemical and thermal, all pellets have reached the values stipulated by the norms of international standards. Thus, it can be concluded that pellets have high energy potential and can be substitute sources of energy, considered as clean and renewable, due to the use of residues from wood, and that the insertion of charcoal fines can contribute to an increase potential of the pellets. |
| id |
UTFPR-12_07e7be6edb8e052d0f0f930b1a311655 |
|---|---|
| oai_identifier_str |
oai:repositorio.utfpr.edu.br:1/4091 |
| network_acronym_str |
UTFPR-12 |
| network_name_str |
Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) |
| repository_id_str |
|
| spelling |
Desenvolvimento de pellets provenientes de madeira e finos de carvão vegetalDevelopment of pellets from wood and charcoal finesBiocombustíveisCarvão vegetalEnergia - Fontes alternativasBiomass energyCharcoalRenewable energy sourcesCNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAOEngenharia de ProduçãoWith the growing demand for world energy, there is a need for energy sources with the potential to replace fossil fuels like oil, coal and natural gas. An alternative form of energy with high energy potential are pellets, which can be considered as renewable biofuels, have low humidity, homogeneous form and high energy density, and are derived from vegetal biomass. The objective of this work is to develop and characterize pellets from wood with addition of charcoal fines. Three compositions of pellets were produced and compared: sawdust pellets of pinus spp. (P1), pine sawdust pellets with 10% charcoal fines (P2) and 25% charcoal fines (P3). The national and international pellet standards were used for this purpose. The results of the analyzes showed that the addition of charcoal fines can increase the energy potential of the pellets, since the pellets P2 and P3 presented values higher than the pellets P1, in the quality parameters related to the energetic part, such as higher calorific value and lower and energy density. With regard to quality parameters, physical, chemical and thermal, all pellets have reached the values stipulated by the norms of international standards. Thus, it can be concluded that pellets have high energy potential and can be substitute sources of energy, considered as clean and renewable, due to the use of residues from wood, and that the insertion of charcoal fines can contribute to an increase potential of the pellets.Com a crescente demanda de energia mundial, há a necessidade de fontes de energia com potencial para substituir os combustíveis fósseis, como petróleo, carvão mineral e gás natural. Uma forma de energia alternativa e com grande potencial energético são os pellets, estes podem ser considerados biocombustíveis renováveis, possuem baixa umidade, forma homogênea e alta densidade energética e são provenientes de biomassa vegetal. O objetivo deste trabalho é desenvolver e caracterizar pellets provenientes de madeira com adição de finos de carvão vegetal. Foram produzidos e comparados três composições de pellets: pellets de serragem de pinus spp. (P1), pellets de serragem de pinus com adição de 10% de finos de carvão vegetal (P2) e com 25% de finos de carvão vegetal (P3). Para isto foram utilizadas as normas de padrões nacionais e internacionais de pellets. Os resultados das análises demonstraram que a adição de finos de carvão vegetal pode elevar o potencial energético dos pellets, já que os pellets P2 e P3 apresentaram valores superiores aos pellets P1, nos parâmetros de qualidade relacionados a parte energética, tais como poder calorífico superior e inferior e densidade energética.Com relação aos parâmetros de qualidade, físicos, químicos e térmicos, todos os pellets atingiram os valores estipulados pelas normas de padrões internacionais. Assim, pode-se concluir que os pellets possuem grande potencial energético e podem ser fontes substituintes de energia, considerada como limpa e renovável, devido a utilização de resíduos provenientes de madeira, e que a inserção de finos de carvão vegetal pode contribuir para um aumento significativo do potencial energético dos pellets.Universidade Tecnológica Federal do ParanáPonta GrossaBrasilPrograma de Pós-Graduação em Engenharia de ProduçãoUTFPRBraghini Junior, Aldohttp://lattes.cnpq.br/1542491584454798Caraschi, José Cláudiohttp://lattes.cnpq.br/5729302235544407Ferreira, Bruno SantosPiekarski, Cassiano MoroFrancisco, Antonio Carlos deBraghini Junior, AldoCamargo, Bruno Silva2019-05-29T13:24:09Z2019-05-29T13:24:09Z2019-02-20info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfCAMARGO, Bruno Silva. Desenvolvimento de pellets provenientes de madeira e finos de carvão vegetal. 75 f. Dissertação (Mestrado em Engenharia de Produção) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2019.http://repositorio.utfpr.edu.br/jspui/handle/1/4091porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))instname:Universidade Tecnológica Federal do Paraná (UTFPR)instacron:UTFPR2019-05-30T06:00:41Zoai:repositorio.utfpr.edu.br:1/4091Repositório InstitucionalPUBhttp://repositorio.utfpr.edu.br:8080/oai/requestriut@utfpr.edu.br || sibi@utfpr.edu.bropendoar:2019-05-30T06:00:41Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)false |
| dc.title.none.fl_str_mv |
Desenvolvimento de pellets provenientes de madeira e finos de carvão vegetal Development of pellets from wood and charcoal fines |
| title |
Desenvolvimento de pellets provenientes de madeira e finos de carvão vegetal |
| spellingShingle |
Desenvolvimento de pellets provenientes de madeira e finos de carvão vegetal Camargo, Bruno Silva Biocombustíveis Carvão vegetal Energia - Fontes alternativas Biomass energy Charcoal Renewable energy sources CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO Engenharia de Produção |
| title_short |
Desenvolvimento de pellets provenientes de madeira e finos de carvão vegetal |
| title_full |
Desenvolvimento de pellets provenientes de madeira e finos de carvão vegetal |
| title_fullStr |
Desenvolvimento de pellets provenientes de madeira e finos de carvão vegetal |
| title_full_unstemmed |
Desenvolvimento de pellets provenientes de madeira e finos de carvão vegetal |
| title_sort |
Desenvolvimento de pellets provenientes de madeira e finos de carvão vegetal |
| author |
Camargo, Bruno Silva |
| author_facet |
Camargo, Bruno Silva |
| author_role |
author |
| dc.contributor.none.fl_str_mv |
Braghini Junior, Aldo http://lattes.cnpq.br/1542491584454798 Caraschi, José Cláudio http://lattes.cnpq.br/5729302235544407 Ferreira, Bruno Santos Piekarski, Cassiano Moro Francisco, Antonio Carlos de Braghini Junior, Aldo |
| dc.contributor.author.fl_str_mv |
Camargo, Bruno Silva |
| dc.subject.por.fl_str_mv |
Biocombustíveis Carvão vegetal Energia - Fontes alternativas Biomass energy Charcoal Renewable energy sources CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO Engenharia de Produção |
| topic |
Biocombustíveis Carvão vegetal Energia - Fontes alternativas Biomass energy Charcoal Renewable energy sources CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO Engenharia de Produção |
| description |
With the growing demand for world energy, there is a need for energy sources with the potential to replace fossil fuels like oil, coal and natural gas. An alternative form of energy with high energy potential are pellets, which can be considered as renewable biofuels, have low humidity, homogeneous form and high energy density, and are derived from vegetal biomass. The objective of this work is to develop and characterize pellets from wood with addition of charcoal fines. Three compositions of pellets were produced and compared: sawdust pellets of pinus spp. (P1), pine sawdust pellets with 10% charcoal fines (P2) and 25% charcoal fines (P3). The national and international pellet standards were used for this purpose. The results of the analyzes showed that the addition of charcoal fines can increase the energy potential of the pellets, since the pellets P2 and P3 presented values higher than the pellets P1, in the quality parameters related to the energetic part, such as higher calorific value and lower and energy density. With regard to quality parameters, physical, chemical and thermal, all pellets have reached the values stipulated by the norms of international standards. Thus, it can be concluded that pellets have high energy potential and can be substitute sources of energy, considered as clean and renewable, due to the use of residues from wood, and that the insertion of charcoal fines can contribute to an increase potential of the pellets. |
| publishDate |
2019 |
| dc.date.none.fl_str_mv |
2019-05-29T13:24:09Z 2019-05-29T13:24:09Z 2019-02-20 |
| dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
| dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
| format |
masterThesis |
| status_str |
publishedVersion |
| dc.identifier.uri.fl_str_mv |
CAMARGO, Bruno Silva. Desenvolvimento de pellets provenientes de madeira e finos de carvão vegetal. 75 f. Dissertação (Mestrado em Engenharia de Produção) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2019. http://repositorio.utfpr.edu.br/jspui/handle/1/4091 |
| identifier_str_mv |
CAMARGO, Bruno Silva. Desenvolvimento de pellets provenientes de madeira e finos de carvão vegetal. 75 f. Dissertação (Mestrado em Engenharia de Produção) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2019. |
| url |
http://repositorio.utfpr.edu.br/jspui/handle/1/4091 |
| dc.language.iso.fl_str_mv |
por |
| language |
por |
| dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
| eu_rights_str_mv |
openAccess |
| dc.format.none.fl_str_mv |
application/pdf |
| dc.publisher.none.fl_str_mv |
Universidade Tecnológica Federal do Paraná Ponta Grossa Brasil Programa de Pós-Graduação em Engenharia de Produção UTFPR |
| publisher.none.fl_str_mv |
Universidade Tecnológica Federal do Paraná Ponta Grossa Brasil Programa de Pós-Graduação em Engenharia de Produção UTFPR |
| dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) instname:Universidade Tecnológica Federal do Paraná (UTFPR) instacron:UTFPR |
| instname_str |
Universidade Tecnológica Federal do Paraná (UTFPR) |
| instacron_str |
UTFPR |
| institution |
UTFPR |
| reponame_str |
Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) |
| collection |
Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) |
| repository.name.fl_str_mv |
Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR) |
| repository.mail.fl_str_mv |
riut@utfpr.edu.br || sibi@utfpr.edu.br |
| _version_ |
1850498301801005056 |