Design and development of an electronic system for the selective stimulation and simultaneous measurement of the skin impedance

Detalhes bibliográficos
Ano de defesa: 2011
Autor(a) principal: Esser, Eduardo Mussoi
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: eng
Instituição de defesa: Universidade Tecnológica Federal do Paraná
Curitiba
Programa de Pós-Graduação em Engenharia Elétrica e Informática Industrial
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://repositorio.utfpr.edu.br/jspui/handle/1/1048
Resumo: It has been found that electrical current applied to the human skin stimulates some of the peripheral nerves and fibers of the human body, causing several reactions such as the increase of sweat production. Moreover the analyses of such reactions can be used to diagnose some diseases, for example diabetes. Nevertheless, most of the electrical stimulation devices, which use mostly square wave signals, are not optimal since they stimulate not only the desired glands (C-fiber) but also the Aδ-fibers of the body, responsible for the fast pain sensation. In this context, this work presents the development of a microcontroller based electronic system for controlling the electrical stimulation of human skin. The objective of the system was to make it possible to test different patterns of electric current pulses, in order to obtain the ideal shape for maximizing the desired stimulation effects with minimal pain. The result of the project was an electronic device that generates electrical pulses based on pre-programmed signals, which are received through a USB interface from a PC. Moreover the system was able to measure the skin impedance value during the electrical stimulation, complementing the diagnosis. The results of the tests carried out with the system showed that the pain intensity during the stimulation could be minimized according to the pulse shape not changing the amplitude and energy of the signal. Moreover a slight difference in the skin impedance was observed when different shapes were applied.
id UTFPR-12_15c85e9af8120c11a2cbe3c9ba40f40d
oai_identifier_str oai:repositorio.utfpr.edu.br:1/1048
network_acronym_str UTFPR-12
network_name_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository_id_str
spelling Design and development of an electronic system for the selective stimulation and simultaneous measurement of the skin impedanceEstimulação elétrica transcutânea do nervoEstimulação neuralEletrofisiologiaTecidos (Anatomia e fisiologia) - AnáliseEngenharia elétricaTranscutaneous electrical nerve stimulationNeural stimulationElectrophysiologyTissues - AnalysisElectric engineeringIt has been found that electrical current applied to the human skin stimulates some of the peripheral nerves and fibers of the human body, causing several reactions such as the increase of sweat production. Moreover the analyses of such reactions can be used to diagnose some diseases, for example diabetes. Nevertheless, most of the electrical stimulation devices, which use mostly square wave signals, are not optimal since they stimulate not only the desired glands (C-fiber) but also the Aδ-fibers of the body, responsible for the fast pain sensation. In this context, this work presents the development of a microcontroller based electronic system for controlling the electrical stimulation of human skin. The objective of the system was to make it possible to test different patterns of electric current pulses, in order to obtain the ideal shape for maximizing the desired stimulation effects with minimal pain. The result of the project was an electronic device that generates electrical pulses based on pre-programmed signals, which are received through a USB interface from a PC. Moreover the system was able to measure the skin impedance value during the electrical stimulation, complementing the diagnosis. The results of the tests carried out with the system showed that the pain intensity during the stimulation could be minimized according to the pulse shape not changing the amplitude and energy of the signal. Moreover a slight difference in the skin impedance was observed when different shapes were applied.A aplicação de corrente elétrica na pele humana estimula alguns dos nervos periféricos e fibras do corpo humano, causando diversas reações tais como o aumento da produção de suor. Além disso, a análise dessas reações pode ser usada para diagnosticar doenças como diabetes. No entanto, grande parte dos aparelhos de estimulação elétrica comerciais utilizam sinais de onda quadrada. Esses sinais não são ideais uma vez que estimulam não somente as glândulas desejadas (fibras C), mas também as fibras A-delta do corpo, responsáveis pela sensação rápida de dor. Neste contexto, este trabalho apresenta o desenvolvimento de um sistema eletrônico para controlar a estimulação elétrica da pele humana. O objetivo do sistema é tornar possível o teste diferentes padrões de pulsos de corrente elétrica, a fim de obter a forma ideal para maximizar os efeitos desejados com um mínimo de dor. Como resultado do projeto tem-se o desenvolvimento de um dispositivo eletrônico microcontrolado que gera pulsos elétricos baseados em sinais pré-programados recebidos de um PC via USB. Além disso, o sistema é capaz de medir o valor da impedância da pele durante a estimulação elétrica, o que pode complementar o processo de diagnóstico. Os resultados dos testes realizados com o sistema mostraram que a intensidade da dor durante a estimulação pode ser minimizada apenas com a forma do pulso, sem a alteração da amplitude e da energia do sinal. Além disso, uma pequena diferença na impedância da pele foi observada quando diferentes formas de onda foram aplicadas.Universidade Tecnológica Federal do ParanáCuritibaPrograma de Pós-Graduação em Engenharia Elétrica e Informática IndustrialGamba, Humberto RemigioNguyen, PhucEsser, Eduardo Mussoi2015-02-09T16:33:44Z2015-02-09T16:33:44Z2011-02-11info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfESSER, Eduardo Mussoi. Design and development of an electronic system for the selective stimulation and simultaneous measurement of the skin impedance. 2011. 145 f. Dissertação (Mestrado em Engenharia Elétrica e Informática Industrial) – Universidade Tecnológica Federal do Paraná, Curitiba, 2011.http://repositorio.utfpr.edu.br/jspui/handle/1/1048engreponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))instname:Universidade Tecnológica Federal do Paraná (UTFPR)instacron:UTFPRinfo:eu-repo/semantics/openAccess2015-03-07T06:20:39Zoai:repositorio.utfpr.edu.br:1/1048Repositório InstitucionalPUBhttp://repositorio.utfpr.edu.br:8080/oai/requestriut@utfpr.edu.br || sibi@utfpr.edu.bropendoar:2015-03-07T06:20:39Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)false
dc.title.none.fl_str_mv Design and development of an electronic system for the selective stimulation and simultaneous measurement of the skin impedance
title Design and development of an electronic system for the selective stimulation and simultaneous measurement of the skin impedance
spellingShingle Design and development of an electronic system for the selective stimulation and simultaneous measurement of the skin impedance
Esser, Eduardo Mussoi
Estimulação elétrica transcutânea do nervo
Estimulação neural
Eletrofisiologia
Tecidos (Anatomia e fisiologia) - Análise
Engenharia elétrica
Transcutaneous electrical nerve stimulation
Neural stimulation
Electrophysiology
Tissues - Analysis
Electric engineering
title_short Design and development of an electronic system for the selective stimulation and simultaneous measurement of the skin impedance
title_full Design and development of an electronic system for the selective stimulation and simultaneous measurement of the skin impedance
title_fullStr Design and development of an electronic system for the selective stimulation and simultaneous measurement of the skin impedance
title_full_unstemmed Design and development of an electronic system for the selective stimulation and simultaneous measurement of the skin impedance
title_sort Design and development of an electronic system for the selective stimulation and simultaneous measurement of the skin impedance
author Esser, Eduardo Mussoi
author_facet Esser, Eduardo Mussoi
author_role author
dc.contributor.none.fl_str_mv Gamba, Humberto Remigio
Nguyen, Phuc
dc.contributor.author.fl_str_mv Esser, Eduardo Mussoi
dc.subject.por.fl_str_mv Estimulação elétrica transcutânea do nervo
Estimulação neural
Eletrofisiologia
Tecidos (Anatomia e fisiologia) - Análise
Engenharia elétrica
Transcutaneous electrical nerve stimulation
Neural stimulation
Electrophysiology
Tissues - Analysis
Electric engineering
topic Estimulação elétrica transcutânea do nervo
Estimulação neural
Eletrofisiologia
Tecidos (Anatomia e fisiologia) - Análise
Engenharia elétrica
Transcutaneous electrical nerve stimulation
Neural stimulation
Electrophysiology
Tissues - Analysis
Electric engineering
description It has been found that electrical current applied to the human skin stimulates some of the peripheral nerves and fibers of the human body, causing several reactions such as the increase of sweat production. Moreover the analyses of such reactions can be used to diagnose some diseases, for example diabetes. Nevertheless, most of the electrical stimulation devices, which use mostly square wave signals, are not optimal since they stimulate not only the desired glands (C-fiber) but also the Aδ-fibers of the body, responsible for the fast pain sensation. In this context, this work presents the development of a microcontroller based electronic system for controlling the electrical stimulation of human skin. The objective of the system was to make it possible to test different patterns of electric current pulses, in order to obtain the ideal shape for maximizing the desired stimulation effects with minimal pain. The result of the project was an electronic device that generates electrical pulses based on pre-programmed signals, which are received through a USB interface from a PC. Moreover the system was able to measure the skin impedance value during the electrical stimulation, complementing the diagnosis. The results of the tests carried out with the system showed that the pain intensity during the stimulation could be minimized according to the pulse shape not changing the amplitude and energy of the signal. Moreover a slight difference in the skin impedance was observed when different shapes were applied.
publishDate 2011
dc.date.none.fl_str_mv 2011-02-11
2015-02-09T16:33:44Z
2015-02-09T16:33:44Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv ESSER, Eduardo Mussoi. Design and development of an electronic system for the selective stimulation and simultaneous measurement of the skin impedance. 2011. 145 f. Dissertação (Mestrado em Engenharia Elétrica e Informática Industrial) – Universidade Tecnológica Federal do Paraná, Curitiba, 2011.
http://repositorio.utfpr.edu.br/jspui/handle/1/1048
identifier_str_mv ESSER, Eduardo Mussoi. Design and development of an electronic system for the selective stimulation and simultaneous measurement of the skin impedance. 2011. 145 f. Dissertação (Mestrado em Engenharia Elétrica e Informática Industrial) – Universidade Tecnológica Federal do Paraná, Curitiba, 2011.
url http://repositorio.utfpr.edu.br/jspui/handle/1/1048
dc.language.iso.fl_str_mv eng
language eng
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Curitiba
Programa de Pós-Graduação em Engenharia Elétrica e Informática Industrial
publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Curitiba
Programa de Pós-Graduação em Engenharia Elétrica e Informática Industrial
dc.source.none.fl_str_mv reponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
instname:Universidade Tecnológica Federal do Paraná (UTFPR)
instacron:UTFPR
instname_str Universidade Tecnológica Federal do Paraná (UTFPR)
instacron_str UTFPR
institution UTFPR
reponame_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
collection Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository.name.fl_str_mv Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)
repository.mail.fl_str_mv riut@utfpr.edu.br || sibi@utfpr.edu.br
_version_ 1850498308119724032