Redes de Bragg em fibras óticas nas bandas do visível e infravermelho
| Ano de defesa: | 2026 |
|---|---|
| Autor(a) principal: | |
| Orientador(a): | |
| Banca de defesa: | |
| Tipo de documento: | Tese |
| Tipo de acesso: | Acesso aberto |
| Idioma: | por |
| Instituição de defesa: |
Universidade Tecnológica Federal do Paraná
Curitiba Brasil Programa de Pós-Graduação em Engenharia Elétrica e Informática Industrial UTFPR |
| Programa de Pós-Graduação: |
Não Informado pela instituição
|
| Departamento: |
Não Informado pela instituição
|
| País: |
Não Informado pela instituição
|
| Palavras-chave em Português: | |
| Link de acesso: | http://repositorio.utfpr.edu.br/jspui/handle/1/39946 |
Resumo: | This thesis presents the production, thermal treatment, and comprehensive characterization of fiber Bragg grating (FBG)-based optical sensors fabricated in standard optical fibers and tapered optical fibers, operating in both the infrared (IR) and visible (VIS) spectral bands. The study focuses on the development of conventional FBGs and regenerated fiber Bragg gratings (RFBGs), aiming to evaluate their thermal and strain sensitivities, long-term stability, and suitability for high-temperature and high-deformation sensing applications. Initially, saturated seed FBGs were inscribed in standard single-mode optical fibers using ultraviolet excimer laser irradiation and phase-mask techniques, targeting operation in the infrared region around 1550 nm. These gratings were thermally characterized and subsequently subjected to controlled high-temperature treatments, reaching temperatures close to 1000 °C, in order to promote the regeneration process. The evolution of the spectral response during thermal annealing was monitored in real time, enabling the analysis of grating degradation, regeneration dynamics, wavelength shift, and reflected signal stability. The resulting regenerated Bragg gratings demonstrated enhanced thermal endurance and spectral robustness when compared to conventional FBGs. In parallel, FBGs operating in the visible spectral band were fabricated in photosensitive optical fibers and characterized under thermal loading. Their spectral behavior, sensitivity coefficients, and regeneration feasibility were investigated and compared to those obtained for infrared gratings. The results highlight the intrinsic differences between IR and VIS FBGs, particularly regarding thermal sensitivity, fabrication complexity, and interrogation system cost, reinforcing the potential of visible-band FBGs for low-cost sensing solutions. Additionally, this work explores the fabrication of tapered optical fibers with diameters ranging from 30 µm to 125 µm and the inscription of FBGs within their uniform waist regions. These tapered FBG sensors were experimentally characterized in terms of temperature and axial strain. The influence of fiber diameter reduction on the effective refractive index, Bragg wavelength, and sensitivity coefficients was systematically analyzed. The results demonstrate a significant enhancement in strain sensitivity as the fiber diameter decreases, confirming the suitability of tapered FBGs for applications requiring high deformation resolution. Overall, this thesis provides a detailed comparative analysis of FBG-based sensors operating in different spectral bands and fiber geometries. The findings contribute to the understanding of thermal regeneration mechanisms, sensitivity optimization, and practical implementation of optical fiber sensors for harsh environments, including high-temperature monitoring and structural health sensing in industrial and automotive applications. |
| id |
UTFPR-12_53a897e5aa6876ebd044331ebe6f3d8d |
|---|---|
| oai_identifier_str |
oai:repositorio.utfpr.edu.br:1/39946 |
| network_acronym_str |
UTFPR-12 |
| network_name_str |
Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) |
| repository_id_str |
|
| spelling |
Redes de Bragg em fibras óticas nas bandas do visível e infravermelhoFiber Bragg gratings in optical fibers in the visible and infrared bandsRedes de BraggFibras ópticas - Tratamento térmicoDetectores ópticosFibras ópticasDeformações (Mecânica) - MediçãoRadiação infravermelhaEspectroscopia ópticaBragg gratingsOptical fibers - Heat treatmentFiber optic sensorsOptical fibersDeformations (Mechanics) - MeasurementInfrared radiationOptical spectroscopyCNPQ::ENGENHARIAS::ENGENHARIA ELETRICAEngenharia ElétricaThis thesis presents the production, thermal treatment, and comprehensive characterization of fiber Bragg grating (FBG)-based optical sensors fabricated in standard optical fibers and tapered optical fibers, operating in both the infrared (IR) and visible (VIS) spectral bands. The study focuses on the development of conventional FBGs and regenerated fiber Bragg gratings (RFBGs), aiming to evaluate their thermal and strain sensitivities, long-term stability, and suitability for high-temperature and high-deformation sensing applications. Initially, saturated seed FBGs were inscribed in standard single-mode optical fibers using ultraviolet excimer laser irradiation and phase-mask techniques, targeting operation in the infrared region around 1550 nm. These gratings were thermally characterized and subsequently subjected to controlled high-temperature treatments, reaching temperatures close to 1000 °C, in order to promote the regeneration process. The evolution of the spectral response during thermal annealing was monitored in real time, enabling the analysis of grating degradation, regeneration dynamics, wavelength shift, and reflected signal stability. The resulting regenerated Bragg gratings demonstrated enhanced thermal endurance and spectral robustness when compared to conventional FBGs. In parallel, FBGs operating in the visible spectral band were fabricated in photosensitive optical fibers and characterized under thermal loading. Their spectral behavior, sensitivity coefficients, and regeneration feasibility were investigated and compared to those obtained for infrared gratings. The results highlight the intrinsic differences between IR and VIS FBGs, particularly regarding thermal sensitivity, fabrication complexity, and interrogation system cost, reinforcing the potential of visible-band FBGs for low-cost sensing solutions. Additionally, this work explores the fabrication of tapered optical fibers with diameters ranging from 30 µm to 125 µm and the inscription of FBGs within their uniform waist regions. These tapered FBG sensors were experimentally characterized in terms of temperature and axial strain. The influence of fiber diameter reduction on the effective refractive index, Bragg wavelength, and sensitivity coefficients was systematically analyzed. The results demonstrate a significant enhancement in strain sensitivity as the fiber diameter decreases, confirming the suitability of tapered FBGs for applications requiring high deformation resolution. Overall, this thesis provides a detailed comparative analysis of FBG-based sensors operating in different spectral bands and fiber geometries. The findings contribute to the understanding of thermal regeneration mechanisms, sensitivity optimization, and practical implementation of optical fiber sensors for harsh environments, including high-temperature monitoring and structural health sensing in industrial and automotive applications.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)Esta tese apresenta a produção, o tratamento térmico e a caracterização abrangente de sensores óticos baseados em redes de Bragg em fibra ótica (FBG), fabricados tanto em fibras óticas padrão quanto em fibras óticas afinadas, com operação nas bandas espectrais do infravermelho (IR) e do visível (VIS). O trabalho concentra-se no desenvolvimento de FBGs convencionais e de redes de Bragg regeneradas (RFBGs), com o objetivo de avaliar suas sensibilidades térmica e à deformação, estabilidade em altas temperaturas e potencial de aplicação em ambientes severos. Inicialmente, redes de Bragg saturadas (redes sementes) foram gravadas em fibras óticas monomodo padrão por meio de irradiação ultravioleta utilizando laser excímero e técnica de máscara de fase, com operação na região do infravermelho em torno de 1550 nm. Essas redes foram caracterizadas termicamente e, posteriormente, submetidas a tratamentos térmicos controlados, com temperaturas próximas de 1000 °C, visando à obtenção do processo de regeneração. A evolução espectral durante o aquecimento foi monitorada em tempo real, permitindo a análise do apagamento da rede semente, do recrescimento das RFBGs, do deslocamento do comprimento de onda de Bragg e da estabilidade do sinal refletido. As redes regeneradas apresentaram maior robustez espectral e elevada resistência térmica quando comparadas às FBGs convencionais. Em paralelo, redes de Bragg operando na banda do visível foram produzidas em fibras óticas fotossensíveis e caracterizadas quanto à resposta térmica. Foram investigados os coeficientes de sensibilidade, o comportamento espectral e a viabilidade do processo de regeneração, possibilitando uma comparação direta com as FBGs na banda do infravermelho. Os resultados evidenciam diferenças intrínsecas entre sensores IR e VIS, especialmente no que se refere à sensibilidade térmica, ao processo de fabricação e ao custo dos sistemas de interrogaçmo, destacando o potencial das FBGs VIS para aplicações de baixo custo. Adicionalmente, foram produzidas fibras óticas afinadas com diâmetros variando entre 30 µm e 125 µm, nas quais redes de Bragg foram gravadas na região de diâmetro uniforme. Esses sensores foram caracterizados em termos de temperatura e deformação axial. A influência da redução do diâmetro da fibra sobre o índice de refração efetivo, o comprimento de onda de Bragg e os coeficientes de sensibilidade foi analisada de forma sistemática. Os resultados demonstram um aumento significativo da sensibilidade à deformação com a diminuição do diâmetro da fibra, confirmando a aplicabilidade das FBGs em fibras afinadas para medições de alta resolução. De forma geral, esta tese apresenta uma análise comparativa detalhada de sensores baseados em redes de Bragg operando em diferentes bandas espectrais e geometrias de fibra. Os resultados contribuem para o entendimento dos mecanismos de regeneração térmica, da otimização de sensibilidade e da aplicação prática de sensores em fibra ótica para monitoramento de altas temperaturas e de deformações em ambientes industriais e automotivos.Universidade Tecnológica Federal do ParanáCuritibaBrasilPrograma de Pós-Graduação em Engenharia Elétrica e Informática IndustrialUTFPROliveira, Valmir dehttps://orcid.org/0000-0001-5731-6127https://lattes.cnpq.br/1276189869170012Castaldo, Fernando Cardosohttps://orcid.org/0000-0003-2251-5673https://lattes.cnpq.br/0087025993114267Oliveira, Valmirhttps://orcid.org/0000-0001-5731-6127https://lattes.cnpq.br/1276189869170012Abe, Ildahttps://orcid.org/0000-0003-1142-8996https://lattes.cnpq.br/6430809426743411Souza, Mauren Abreu dehttps://orcid.org/0000-0001-6137-918Xhttps://lattes.cnpq.br/7932254008088709Dreyer, Uilian Joséhttps://orcid.org/0000-0001-9720-4410https://lattes.cnpq.br/6015434912116988Marques, Carlos Alberto Ferreirahttps://orcid.org/0000-0002-8596-5092Moura, Camila Carvalho de2026-04-01T18:15:10Z2026-04-01T18:15:10Z2026-02-18info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisapplication/pdfMOURA, Camila Carvalho de. Redes de Bragg em fibras óticas nas bandas do visível e infravermelho. 2026. Tese (Doutorado em Engenharia Elétrica e Informática Industrial) - Universidade Tecnológica Federal do Paraná, Curitiba, 2026.http://repositorio.utfpr.edu.br/jspui/handle/1/39946porhttp://creativecommons.org/licenses/by/4.0/info:eu-repo/semantics/openAccessreponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))instname:Universidade Tecnológica Federal do Paraná (UTFPR)instacron:UTFPR2026-04-02T06:13:50Zoai:repositorio.utfpr.edu.br:1/39946Repositório InstitucionalPUBhttp://repositorio.utfpr.edu.br:8080/oai/requestriut@utfpr.edu.br || sibi@utfpr.edu.bropendoar:2026-04-02T06:13:50Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)false |
| dc.title.none.fl_str_mv |
Redes de Bragg em fibras óticas nas bandas do visível e infravermelho Fiber Bragg gratings in optical fibers in the visible and infrared bands |
| title |
Redes de Bragg em fibras óticas nas bandas do visível e infravermelho |
| spellingShingle |
Redes de Bragg em fibras óticas nas bandas do visível e infravermelho Moura, Camila Carvalho de Redes de Bragg Fibras ópticas - Tratamento térmico Detectores ópticos Fibras ópticas Deformações (Mecânica) - Medição Radiação infravermelha Espectroscopia óptica Bragg gratings Optical fibers - Heat treatment Fiber optic sensors Optical fibers Deformations (Mechanics) - Measurement Infrared radiation Optical spectroscopy CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA Engenharia Elétrica |
| title_short |
Redes de Bragg em fibras óticas nas bandas do visível e infravermelho |
| title_full |
Redes de Bragg em fibras óticas nas bandas do visível e infravermelho |
| title_fullStr |
Redes de Bragg em fibras óticas nas bandas do visível e infravermelho |
| title_full_unstemmed |
Redes de Bragg em fibras óticas nas bandas do visível e infravermelho |
| title_sort |
Redes de Bragg em fibras óticas nas bandas do visível e infravermelho |
| author |
Moura, Camila Carvalho de |
| author_facet |
Moura, Camila Carvalho de |
| author_role |
author |
| dc.contributor.none.fl_str_mv |
Oliveira, Valmir de https://orcid.org/0000-0001-5731-6127 https://lattes.cnpq.br/1276189869170012 Castaldo, Fernando Cardoso https://orcid.org/0000-0003-2251-5673 https://lattes.cnpq.br/0087025993114267 Oliveira, Valmir https://orcid.org/0000-0001-5731-6127 https://lattes.cnpq.br/1276189869170012 Abe, Ilda https://orcid.org/0000-0003-1142-8996 https://lattes.cnpq.br/6430809426743411 Souza, Mauren Abreu de https://orcid.org/0000-0001-6137-918X https://lattes.cnpq.br/7932254008088709 Dreyer, Uilian José https://orcid.org/0000-0001-9720-4410 https://lattes.cnpq.br/6015434912116988 Marques, Carlos Alberto Ferreira https://orcid.org/0000-0002-8596-5092 |
| dc.contributor.author.fl_str_mv |
Moura, Camila Carvalho de |
| dc.subject.por.fl_str_mv |
Redes de Bragg Fibras ópticas - Tratamento térmico Detectores ópticos Fibras ópticas Deformações (Mecânica) - Medição Radiação infravermelha Espectroscopia óptica Bragg gratings Optical fibers - Heat treatment Fiber optic sensors Optical fibers Deformations (Mechanics) - Measurement Infrared radiation Optical spectroscopy CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA Engenharia Elétrica |
| topic |
Redes de Bragg Fibras ópticas - Tratamento térmico Detectores ópticos Fibras ópticas Deformações (Mecânica) - Medição Radiação infravermelha Espectroscopia óptica Bragg gratings Optical fibers - Heat treatment Fiber optic sensors Optical fibers Deformations (Mechanics) - Measurement Infrared radiation Optical spectroscopy CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA Engenharia Elétrica |
| description |
This thesis presents the production, thermal treatment, and comprehensive characterization of fiber Bragg grating (FBG)-based optical sensors fabricated in standard optical fibers and tapered optical fibers, operating in both the infrared (IR) and visible (VIS) spectral bands. The study focuses on the development of conventional FBGs and regenerated fiber Bragg gratings (RFBGs), aiming to evaluate their thermal and strain sensitivities, long-term stability, and suitability for high-temperature and high-deformation sensing applications. Initially, saturated seed FBGs were inscribed in standard single-mode optical fibers using ultraviolet excimer laser irradiation and phase-mask techniques, targeting operation in the infrared region around 1550 nm. These gratings were thermally characterized and subsequently subjected to controlled high-temperature treatments, reaching temperatures close to 1000 °C, in order to promote the regeneration process. The evolution of the spectral response during thermal annealing was monitored in real time, enabling the analysis of grating degradation, regeneration dynamics, wavelength shift, and reflected signal stability. The resulting regenerated Bragg gratings demonstrated enhanced thermal endurance and spectral robustness when compared to conventional FBGs. In parallel, FBGs operating in the visible spectral band were fabricated in photosensitive optical fibers and characterized under thermal loading. Their spectral behavior, sensitivity coefficients, and regeneration feasibility were investigated and compared to those obtained for infrared gratings. The results highlight the intrinsic differences between IR and VIS FBGs, particularly regarding thermal sensitivity, fabrication complexity, and interrogation system cost, reinforcing the potential of visible-band FBGs for low-cost sensing solutions. Additionally, this work explores the fabrication of tapered optical fibers with diameters ranging from 30 µm to 125 µm and the inscription of FBGs within their uniform waist regions. These tapered FBG sensors were experimentally characterized in terms of temperature and axial strain. The influence of fiber diameter reduction on the effective refractive index, Bragg wavelength, and sensitivity coefficients was systematically analyzed. The results demonstrate a significant enhancement in strain sensitivity as the fiber diameter decreases, confirming the suitability of tapered FBGs for applications requiring high deformation resolution. Overall, this thesis provides a detailed comparative analysis of FBG-based sensors operating in different spectral bands and fiber geometries. The findings contribute to the understanding of thermal regeneration mechanisms, sensitivity optimization, and practical implementation of optical fiber sensors for harsh environments, including high-temperature monitoring and structural health sensing in industrial and automotive applications. |
| publishDate |
2026 |
| dc.date.none.fl_str_mv |
2026-04-01T18:15:10Z 2026-04-01T18:15:10Z 2026-02-18 |
| dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
| dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
| format |
doctoralThesis |
| status_str |
publishedVersion |
| dc.identifier.uri.fl_str_mv |
MOURA, Camila Carvalho de. Redes de Bragg em fibras óticas nas bandas do visível e infravermelho. 2026. Tese (Doutorado em Engenharia Elétrica e Informática Industrial) - Universidade Tecnológica Federal do Paraná, Curitiba, 2026. http://repositorio.utfpr.edu.br/jspui/handle/1/39946 |
| identifier_str_mv |
MOURA, Camila Carvalho de. Redes de Bragg em fibras óticas nas bandas do visível e infravermelho. 2026. Tese (Doutorado em Engenharia Elétrica e Informática Industrial) - Universidade Tecnológica Federal do Paraná, Curitiba, 2026. |
| url |
http://repositorio.utfpr.edu.br/jspui/handle/1/39946 |
| dc.language.iso.fl_str_mv |
por |
| language |
por |
| dc.rights.driver.fl_str_mv |
http://creativecommons.org/licenses/by/4.0/ info:eu-repo/semantics/openAccess |
| rights_invalid_str_mv |
http://creativecommons.org/licenses/by/4.0/ |
| eu_rights_str_mv |
openAccess |
| dc.format.none.fl_str_mv |
application/pdf |
| dc.publisher.none.fl_str_mv |
Universidade Tecnológica Federal do Paraná Curitiba Brasil Programa de Pós-Graduação em Engenharia Elétrica e Informática Industrial UTFPR |
| publisher.none.fl_str_mv |
Universidade Tecnológica Federal do Paraná Curitiba Brasil Programa de Pós-Graduação em Engenharia Elétrica e Informática Industrial UTFPR |
| dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) instname:Universidade Tecnológica Federal do Paraná (UTFPR) instacron:UTFPR |
| instname_str |
Universidade Tecnológica Federal do Paraná (UTFPR) |
| instacron_str |
UTFPR |
| institution |
UTFPR |
| reponame_str |
Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) |
| collection |
Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) |
| repository.name.fl_str_mv |
Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR) |
| repository.mail.fl_str_mv |
riut@utfpr.edu.br || sibi@utfpr.edu.br |
| _version_ |
1879057224531181568 |