Comportamento do sinal mecanomiográfico em contrações voluntárias e estimuladas eletricamente

Detalhes bibliográficos
Ano de defesa: 2011
Autor(a) principal: Scheeren, Eduardo Mendonça
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Tese
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Tecnológica Federal do Paraná
Curitiba
Programa de Pós-Graduação em Engenharia Elétrica e Informática Industrial
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://repositorio.utfpr.edu.br/jspui/handle/1/1053
Resumo: Introduction: Mechanomyography (MMG) is used to measure muscle oscillations and electromyography (EMG) is used to study recruitment thresholds of motor units. Both techniques indicate the effect of the phenomena responsible for muscle fatigue during voluntary contractions. There is a technical limitation to use the EMG with the functional electrical stimulation (FES) simultaneously what the MMG can overcome. Objective: to characterize and compare the EMG and MMG signal during voluntary contraction and to verify if is there difference among the MMG signal by FES protocols for health (HI) and spinal cord injury individuals (SCI). Materials and Methods: the subjects were splited in three groups with 10 participants (HI – voluntary contraction; HI – FES; SCI – FES). EMG surface electrodes and triaxial accelerometer were used to acquire the EMG and MMG signals, respectively. The experimental protocol was done in two steps: (a) fatigue protocol with biceps brachii muscle monitored by EMG and MMG (HI) and (b) four fatiguing (lower limb) electrically stimulated contraction profiles (different days) in HI and SCI. The experimental protocol consisted of four contractions, a rest interval of 15 min and four additional contractions. The features used to analyze the EMG and MMG signals were root mean square (RMS) (time domain) and median frequency (frequency domain). Results: the results indicate an increase in the EMG signal amplitude during the muscle fatigue protocol by voluntary contraction while the MMG signal energy decreased. The RMS and median frequency values may be useful as indicators of fatigue in FES protocols for HI and SCI. The FES profile set to 1kHz pulse frequency, 200μs active pulse duration and burst frequency of 50Hz presented the lowest MMG RMS and median frequency values, suggesting less muscle modification. The MMG signal was different between HI and SCI. Conclusions: in both EMG and MMG biceps brachii signals there was frequency attenuation during the fatigue protocol indicating similarity in both signals. The MMG signal was different between HI and SCI in all FES profiles and it is probably due to the difference in the proportion of muscle fiber between the groups.
id UTFPR-12_a7167d981ac9df8a853765baa42ab929
oai_identifier_str oai:repositorio.utfpr.edu.br:1/1053
network_acronym_str UTFPR-12
network_name_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository_id_str
spelling Comportamento do sinal mecanomiográfico em contrações voluntárias e estimuladas eletricamenteEletromiografiaMedula Óssea - Ferimentos e lesõesEngenharia elétricaElectromyographyBone marrow - Wounds and injuriesElectric engineeringIntroduction: Mechanomyography (MMG) is used to measure muscle oscillations and electromyography (EMG) is used to study recruitment thresholds of motor units. Both techniques indicate the effect of the phenomena responsible for muscle fatigue during voluntary contractions. There is a technical limitation to use the EMG with the functional electrical stimulation (FES) simultaneously what the MMG can overcome. Objective: to characterize and compare the EMG and MMG signal during voluntary contraction and to verify if is there difference among the MMG signal by FES protocols for health (HI) and spinal cord injury individuals (SCI). Materials and Methods: the subjects were splited in three groups with 10 participants (HI – voluntary contraction; HI – FES; SCI – FES). EMG surface electrodes and triaxial accelerometer were used to acquire the EMG and MMG signals, respectively. The experimental protocol was done in two steps: (a) fatigue protocol with biceps brachii muscle monitored by EMG and MMG (HI) and (b) four fatiguing (lower limb) electrically stimulated contraction profiles (different days) in HI and SCI. The experimental protocol consisted of four contractions, a rest interval of 15 min and four additional contractions. The features used to analyze the EMG and MMG signals were root mean square (RMS) (time domain) and median frequency (frequency domain). Results: the results indicate an increase in the EMG signal amplitude during the muscle fatigue protocol by voluntary contraction while the MMG signal energy decreased. The RMS and median frequency values may be useful as indicators of fatigue in FES protocols for HI and SCI. The FES profile set to 1kHz pulse frequency, 200μs active pulse duration and burst frequency of 50Hz presented the lowest MMG RMS and median frequency values, suggesting less muscle modification. The MMG signal was different between HI and SCI. Conclusions: in both EMG and MMG biceps brachii signals there was frequency attenuation during the fatigue protocol indicating similarity in both signals. The MMG signal was different between HI and SCI in all FES profiles and it is probably due to the difference in the proportion of muscle fiber between the groups.CAPESIntrodução: a mecanomiografia (MMG) avalia as oscilações mecânicas causadas pela contração muscular, enquanto a eletromiografia (EMG) mede o somatório dos potenciais de ação que são enviados pelo sistema nervoso central para as unidades motoras que estão na região de sensibilidade do sensor. Ambas as técnicas são empregadas na detecção de fadiga muscular em contração voluntária, sendo que a EMG apresenta limitações durante aplicações com estimulação elétrica neuromuscular (EENM) enquanto a MMG apresenta boa compatibilidade. Objetivos: caracterizar e comparar os sinais de EMG e MMG em contração voluntária e comparar a resposta do sinal mecanomiográfico em protocolos de extensão de joelho com aplicação de EENM em participantes hígidos (PHI) e com lesão medular (PLM). Materiais e Métodos: a amostra foi dividida em 3 grupos de 10 participantes (PHI – contração voluntária; PHI – EENM; PLM – EENM). Eletrodos de superfície em configuração bipolar foram utilizados para obtenção do sinal de EMG e um acelerômetro triaxial foi utilizado como sensor de MMG. Os experimentos foram realizados em 2 etapas: (a) protocolo de fadiga com o músculo bíceps braquial com monitoração do sinal de EMG e MMG e (b) protocolo de EENM (4 padrões) com o músculo quadríceps com 4 contrações, 15 min de intervalo e mais 4 contrações. Os sinais de EMG e MMG foram analisados no domínio do tempo e da frequência. Resultados: aumentou a amplitude do sinal de EMG e diminuiu a energia do sinal de MMG no decorrer do protocolo de fadiga muscular por contração voluntária. O valor eficaz (root mean square - RMS) e a frequência mediana (FM) do sinal de MMG podem ser úteis como indicadores de fadiga em protocolos com EENM para PHI e PLM. O padrão de EENM com frequência de pulso de 1kHz, 200μs de período ativo de pulso (on) e 50Hz de frequência de burst foi o que apresentou os menores valores de RMS e de FM para PHI e PLM, o que sugere que músculo sofreu menos modificações no decorrer do protocolo. A resposta do sinal de MMG apresentou diferença para participantes hígidos e com lesão medular. Conclusões: em ambos os sinais (EMG e MMG) do músculo bíceps braquial houve redução da frequência no decorrer do protocolo de fadiga indicando resultado similar em ambos os sinais. Foi observada diferença no sinal mecanomiográfico entre PHI e PLM em todos os protocolos de EENM provavelmente devido à diferença na proporção de fibras muscular (lentas e rápidas) entre os grupos.Universidade Tecnológica Federal do ParanáCuritibaPrograma de Pós-Graduação em Engenharia Elétrica e Informática IndustrialNohama, PercyScheeren, Eduardo Mendonça2015-02-09T18:23:44Z2015-02-09T18:23:44Z2011-03-31info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisapplication/pdfSCHEEREN, Eduardo Mendonça. Comportamento do sinal mecanomiográfico em contrações voluntárias e estimuladas eletricamente. 2011. 113 f. Tese (Doutorado em Engenharia Elétrica e Informática Industrial) – Universidade Tecnológica Federal do Paraná, Curitiba, 2011.http://repositorio.utfpr.edu.br/jspui/handle/1/1053porreponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))instname:Universidade Tecnológica Federal do Paraná (UTFPR)instacron:UTFPRinfo:eu-repo/semantics/openAccess2015-03-07T06:20:50Zoai:repositorio.utfpr.edu.br:1/1053Repositório InstitucionalPUBhttp://repositorio.utfpr.edu.br:8080/oai/requestriut@utfpr.edu.br || sibi@utfpr.edu.bropendoar:2015-03-07T06:20:50Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)false
dc.title.none.fl_str_mv Comportamento do sinal mecanomiográfico em contrações voluntárias e estimuladas eletricamente
title Comportamento do sinal mecanomiográfico em contrações voluntárias e estimuladas eletricamente
spellingShingle Comportamento do sinal mecanomiográfico em contrações voluntárias e estimuladas eletricamente
Scheeren, Eduardo Mendonça
Eletromiografia
Medula Óssea - Ferimentos e lesões
Engenharia elétrica
Electromyography
Bone marrow - Wounds and injuries
Electric engineering
title_short Comportamento do sinal mecanomiográfico em contrações voluntárias e estimuladas eletricamente
title_full Comportamento do sinal mecanomiográfico em contrações voluntárias e estimuladas eletricamente
title_fullStr Comportamento do sinal mecanomiográfico em contrações voluntárias e estimuladas eletricamente
title_full_unstemmed Comportamento do sinal mecanomiográfico em contrações voluntárias e estimuladas eletricamente
title_sort Comportamento do sinal mecanomiográfico em contrações voluntárias e estimuladas eletricamente
author Scheeren, Eduardo Mendonça
author_facet Scheeren, Eduardo Mendonça
author_role author
dc.contributor.none.fl_str_mv Nohama, Percy
dc.contributor.author.fl_str_mv Scheeren, Eduardo Mendonça
dc.subject.por.fl_str_mv Eletromiografia
Medula Óssea - Ferimentos e lesões
Engenharia elétrica
Electromyography
Bone marrow - Wounds and injuries
Electric engineering
topic Eletromiografia
Medula Óssea - Ferimentos e lesões
Engenharia elétrica
Electromyography
Bone marrow - Wounds and injuries
Electric engineering
description Introduction: Mechanomyography (MMG) is used to measure muscle oscillations and electromyography (EMG) is used to study recruitment thresholds of motor units. Both techniques indicate the effect of the phenomena responsible for muscle fatigue during voluntary contractions. There is a technical limitation to use the EMG with the functional electrical stimulation (FES) simultaneously what the MMG can overcome. Objective: to characterize and compare the EMG and MMG signal during voluntary contraction and to verify if is there difference among the MMG signal by FES protocols for health (HI) and spinal cord injury individuals (SCI). Materials and Methods: the subjects were splited in three groups with 10 participants (HI – voluntary contraction; HI – FES; SCI – FES). EMG surface electrodes and triaxial accelerometer were used to acquire the EMG and MMG signals, respectively. The experimental protocol was done in two steps: (a) fatigue protocol with biceps brachii muscle monitored by EMG and MMG (HI) and (b) four fatiguing (lower limb) electrically stimulated contraction profiles (different days) in HI and SCI. The experimental protocol consisted of four contractions, a rest interval of 15 min and four additional contractions. The features used to analyze the EMG and MMG signals were root mean square (RMS) (time domain) and median frequency (frequency domain). Results: the results indicate an increase in the EMG signal amplitude during the muscle fatigue protocol by voluntary contraction while the MMG signal energy decreased. The RMS and median frequency values may be useful as indicators of fatigue in FES protocols for HI and SCI. The FES profile set to 1kHz pulse frequency, 200μs active pulse duration and burst frequency of 50Hz presented the lowest MMG RMS and median frequency values, suggesting less muscle modification. The MMG signal was different between HI and SCI. Conclusions: in both EMG and MMG biceps brachii signals there was frequency attenuation during the fatigue protocol indicating similarity in both signals. The MMG signal was different between HI and SCI in all FES profiles and it is probably due to the difference in the proportion of muscle fiber between the groups.
publishDate 2011
dc.date.none.fl_str_mv 2011-03-31
2015-02-09T18:23:44Z
2015-02-09T18:23:44Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/doctoralThesis
format doctoralThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv SCHEEREN, Eduardo Mendonça. Comportamento do sinal mecanomiográfico em contrações voluntárias e estimuladas eletricamente. 2011. 113 f. Tese (Doutorado em Engenharia Elétrica e Informática Industrial) – Universidade Tecnológica Federal do Paraná, Curitiba, 2011.
http://repositorio.utfpr.edu.br/jspui/handle/1/1053
identifier_str_mv SCHEEREN, Eduardo Mendonça. Comportamento do sinal mecanomiográfico em contrações voluntárias e estimuladas eletricamente. 2011. 113 f. Tese (Doutorado em Engenharia Elétrica e Informática Industrial) – Universidade Tecnológica Federal do Paraná, Curitiba, 2011.
url http://repositorio.utfpr.edu.br/jspui/handle/1/1053
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Curitiba
Programa de Pós-Graduação em Engenharia Elétrica e Informática Industrial
publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Curitiba
Programa de Pós-Graduação em Engenharia Elétrica e Informática Industrial
dc.source.none.fl_str_mv reponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
instname:Universidade Tecnológica Federal do Paraná (UTFPR)
instacron:UTFPR
instname_str Universidade Tecnológica Federal do Paraná (UTFPR)
instacron_str UTFPR
institution UTFPR
reponame_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
collection Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository.name.fl_str_mv Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)
repository.mail.fl_str_mv riut@utfpr.edu.br || sibi@utfpr.edu.br
_version_ 1850498288708485120