Influência da vazão e da posição do jato de água na transferência de oxigênio por tubos venturi

Detalhes bibliográficos
Ano de defesa: 2017
Autor(a) principal: Gianjacomo, Carlos Henrique
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Tecnológica Federal do Paraná
Apucarana
Londrina
Brasil
Programa de Pós-Graduação em Engenharia Ambiental
UTFPR
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://repositorio.utfpr.edu.br/jspui/handle/1/2268
Resumo: The objective of this work was to evaluate the reoxygenation potential of water using Venturi tubes. The experiments were performed in two tanks: Horizontal (HT) and vertical (VT), with useful volumes of 100 L and 63 L, respectively. The tests followed the statistical design associated with the surface methodology of responses, having as independent variables the water flow (Qwater) and the inlet position of the jet (Pjet), for a single Venturi tube and two associated tubes in parallel. Were determined as response the global oxygen transfer coefficients from air to water (KLa) and oxygenation efficiencies (OE). The results indicate that the water flow significantly influenced the values of KLa and OE, whereas the position of the jet only had effect when the Venturi tubes were associated in parallel, in both tanks. In general, the best KLa results, up to 50 h-1, were obtained for higher water flows and a jet positioned 15 cm above the water surface. Oxygenation efficiencies of up to 2 kgO2 kW-1 h-1 were observed at low water flow rates. Considering experimental values of power density (DP) and volume of air injected per minute, the vertical tank showed a performance of KLa and EO slightly higher than vertical. The experimental data can be satisfactorily represented by the mathematical models obtained.
id UTFPR-12_a7cb7d2f65e411176c02aa38d10b53f2
oai_identifier_str oai:repositorio.utfpr.edu.br:1/2268
network_acronym_str UTFPR-12
network_name_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository_id_str
spelling Influência da vazão e da posição do jato de água na transferência de oxigênio por tubos venturiInfluence of flow rate and water jet position on oxygen transfer by venturi tubesÁguas residuaisTubos VenturiSewageVenturi tubesCNPQ::ENGENHARIAS::ENGENHARIA SANITARIAEngenharia SanitáriaThe objective of this work was to evaluate the reoxygenation potential of water using Venturi tubes. The experiments were performed in two tanks: Horizontal (HT) and vertical (VT), with useful volumes of 100 L and 63 L, respectively. The tests followed the statistical design associated with the surface methodology of responses, having as independent variables the water flow (Qwater) and the inlet position of the jet (Pjet), for a single Venturi tube and two associated tubes in parallel. Were determined as response the global oxygen transfer coefficients from air to water (KLa) and oxygenation efficiencies (OE). The results indicate that the water flow significantly influenced the values of KLa and OE, whereas the position of the jet only had effect when the Venturi tubes were associated in parallel, in both tanks. In general, the best KLa results, up to 50 h-1, were obtained for higher water flows and a jet positioned 15 cm above the water surface. Oxygenation efficiencies of up to 2 kgO2 kW-1 h-1 were observed at low water flow rates. Considering experimental values of power density (DP) and volume of air injected per minute, the vertical tank showed a performance of KLa and EO slightly higher than vertical. The experimental data can be satisfactorily represented by the mathematical models obtained.O objetivo desse trabalho foi avaliar o potencial de reoxigenação da água por meio de tubos de Venturi. Os experimentos foram realizados em dois tanques: horizontal (TH) e vertical (TV), com volumes úteis de 100 L e 63 L, respectivamente. Os testes seguiram delineamento experimental associado a metodologia de superfície de respostas, tendo como variáveis independentes a vazão da água (Qágua) e a posição de entrada do jato (Pjato), para um único tubo de Venturi e dois tubos associados em paralelo. Como respostas, foram determinados os coeficientes globais de transferência de oxigênio do ar para a água (KLa) e as eficiências de oxigenação (EO). Os resultados indicam que a vazão da água influenciou significativamente os valores de KLa e EO, enquanto que a posição do jato só teve efeito quando os tubos de Venturi foram associados em paralelo, em ambos os tanques. De maneira geral, os melhores resultados do KLa, de até 50 h-1, foram obtidos para vazões de água mais elevadas e a jato posicionado 15 cm acima da superfície da água. Eficiências de oxigenação de até 2 kgO2 kW-1 h-1 foram observadas para baixos valores de vazão de água. Considerando-se valores experimentais de densidade de potência (DP) e volume de ar injetado por minuto na massa de água, o tanque vertical apresentou desempenho de KLa e EO ligeiramente superior ao horizontal. Os dados experimentais podem ser satisfatoriamente representados pelos modelos matemáticos obtidos.Universidade Tecnológica Federal do ParanáApucaranaLondrinaBrasilPrograma de Pós-Graduação em Engenharia AmbientalUTFPRFazolo, Ajadirhttp://lattes.cnpq.br/6444873963227829Fazolo, AjadirPinheiro, Hemerson DonizeteSantiago, Cosmo DamiãoGianjacomo, Carlos Henrique2017-08-11T21:28:39Z2017-08-11T21:28:39Z2017-04-28info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfGIANJACOMO, Carlos Henrique. Influência da vazão e da posição do jato de água na transferência de oxigênio por tubos venturi. 2017. 82 f. Dissertação (Mestrado em Engenharia Ambiental) - Universidade Tecnológica Federal do Paraná, Londrina, 2017.http://repositorio.utfpr.edu.br/jspui/handle/1/2268porhttp://creativecommons.org/licenses/by-nc-sa/4.0/info:eu-repo/semantics/openAccessreponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))instname:Universidade Tecnológica Federal do Paraná (UTFPR)instacron:UTFPR2017-08-11T21:28:39Zoai:repositorio.utfpr.edu.br:1/2268Repositório InstitucionalPUBhttp://repositorio.utfpr.edu.br:8080/oai/requestriut@utfpr.edu.br || sibi@utfpr.edu.bropendoar:2017-08-11T21:28:39Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)false
dc.title.none.fl_str_mv Influência da vazão e da posição do jato de água na transferência de oxigênio por tubos venturi
Influence of flow rate and water jet position on oxygen transfer by venturi tubes
title Influência da vazão e da posição do jato de água na transferência de oxigênio por tubos venturi
spellingShingle Influência da vazão e da posição do jato de água na transferência de oxigênio por tubos venturi
Gianjacomo, Carlos Henrique
Águas residuais
Tubos Venturi
Sewage
Venturi tubes
CNPQ::ENGENHARIAS::ENGENHARIA SANITARIA
Engenharia Sanitária
title_short Influência da vazão e da posição do jato de água na transferência de oxigênio por tubos venturi
title_full Influência da vazão e da posição do jato de água na transferência de oxigênio por tubos venturi
title_fullStr Influência da vazão e da posição do jato de água na transferência de oxigênio por tubos venturi
title_full_unstemmed Influência da vazão e da posição do jato de água na transferência de oxigênio por tubos venturi
title_sort Influência da vazão e da posição do jato de água na transferência de oxigênio por tubos venturi
author Gianjacomo, Carlos Henrique
author_facet Gianjacomo, Carlos Henrique
author_role author
dc.contributor.none.fl_str_mv Fazolo, Ajadir
http://lattes.cnpq.br/6444873963227829
Fazolo, Ajadir
Pinheiro, Hemerson Donizete
Santiago, Cosmo Damião
dc.contributor.author.fl_str_mv Gianjacomo, Carlos Henrique
dc.subject.por.fl_str_mv Águas residuais
Tubos Venturi
Sewage
Venturi tubes
CNPQ::ENGENHARIAS::ENGENHARIA SANITARIA
Engenharia Sanitária
topic Águas residuais
Tubos Venturi
Sewage
Venturi tubes
CNPQ::ENGENHARIAS::ENGENHARIA SANITARIA
Engenharia Sanitária
description The objective of this work was to evaluate the reoxygenation potential of water using Venturi tubes. The experiments were performed in two tanks: Horizontal (HT) and vertical (VT), with useful volumes of 100 L and 63 L, respectively. The tests followed the statistical design associated with the surface methodology of responses, having as independent variables the water flow (Qwater) and the inlet position of the jet (Pjet), for a single Venturi tube and two associated tubes in parallel. Were determined as response the global oxygen transfer coefficients from air to water (KLa) and oxygenation efficiencies (OE). The results indicate that the water flow significantly influenced the values of KLa and OE, whereas the position of the jet only had effect when the Venturi tubes were associated in parallel, in both tanks. In general, the best KLa results, up to 50 h-1, were obtained for higher water flows and a jet positioned 15 cm above the water surface. Oxygenation efficiencies of up to 2 kgO2 kW-1 h-1 were observed at low water flow rates. Considering experimental values of power density (DP) and volume of air injected per minute, the vertical tank showed a performance of KLa and EO slightly higher than vertical. The experimental data can be satisfactorily represented by the mathematical models obtained.
publishDate 2017
dc.date.none.fl_str_mv 2017-08-11T21:28:39Z
2017-08-11T21:28:39Z
2017-04-28
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv GIANJACOMO, Carlos Henrique. Influência da vazão e da posição do jato de água na transferência de oxigênio por tubos venturi. 2017. 82 f. Dissertação (Mestrado em Engenharia Ambiental) - Universidade Tecnológica Federal do Paraná, Londrina, 2017.
http://repositorio.utfpr.edu.br/jspui/handle/1/2268
identifier_str_mv GIANJACOMO, Carlos Henrique. Influência da vazão e da posição do jato de água na transferência de oxigênio por tubos venturi. 2017. 82 f. Dissertação (Mestrado em Engenharia Ambiental) - Universidade Tecnológica Federal do Paraná, Londrina, 2017.
url http://repositorio.utfpr.edu.br/jspui/handle/1/2268
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv http://creativecommons.org/licenses/by-nc-sa/4.0/
info:eu-repo/semantics/openAccess
rights_invalid_str_mv http://creativecommons.org/licenses/by-nc-sa/4.0/
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Apucarana
Londrina
Brasil
Programa de Pós-Graduação em Engenharia Ambiental
UTFPR
publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Apucarana
Londrina
Brasil
Programa de Pós-Graduação em Engenharia Ambiental
UTFPR
dc.source.none.fl_str_mv reponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
instname:Universidade Tecnológica Federal do Paraná (UTFPR)
instacron:UTFPR
instname_str Universidade Tecnológica Federal do Paraná (UTFPR)
instacron_str UTFPR
institution UTFPR
reponame_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
collection Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository.name.fl_str_mv Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)
repository.mail.fl_str_mv riut@utfpr.edu.br || sibi@utfpr.edu.br
_version_ 1850498255137275904